Question 430
Two staff laptops exchange data directly over a peer wireless network that bypasses the monitored enterprise access points. Which wireless attack or interference pattern best explains the symptoms?
- Deauthentication frame abuse
- Weak WPA password guessing
- RF jamming
- Evil twin SSID impersonation
- Unauthorized ad hoc connection
Explanation
Correct Answer
E:Peer-to-peer wireless paths can evade infrastructure controls and create unmanaged trust relationships. Device policy should restrict unapproved connections.
Incorrect Answers
A:Forged deauthentication or disassociation frames can disrupt Wi-Fi clients where management-frame protection is absent or ineffective; its distinguishing scope is malicious wireless disconnection frames, not the reported wireless peer network outside managed APs.
B:Weak WPA2-Personal passphrases may be guessed using captured handshake material in a setting defined by offline guessing of shared Wi-Fi passphrase; the observed issue is wireless peer network outside managed APs.
C:Radio interference or deliberate jamming raises noise and prevents reliable wireless reception; the operational difference is elevated non-decodable channel noise versus the scenario's wireless peer network outside managed APs.
D:Evil twins mimic legitimate wireless identifiers to attract clients and steal credentials or relay traffic when the underlying evidence concerns counterfeit access point using trusted network name rather than the stated wireless peer network outside managed APs.
Question 431
A new office has dead zones and unintended signal leakage into a public lobby, and staff need a measured radio coverage map. Which radio-frequency or coverage practice best improves wireless security?
- Transmit power reduction
- Directional antenna design
- Channel interference planning
- Wireless site survey
Explanation
Correct Answer
D:Site surveys evaluate signal, noise, channel use and placement so power and access points match coverage objectives.
Incorrect Answers
A:Adjusting radio transmit power can reduce unnecessary external coverage while preserving service indoors when analysts encounter excessive wireless signal beyond premises; this question instead describes evidence-based Wi-Fi coverage planning.
B:Directional antennas shape signal coverage, improving targeted reception and reducing incidental exposure when installed properly; its distinguishing scope is focused Wi-Fi coverage to one area, not the reported evidence-based Wi-Fi coverage planning.
C:Channel plans reduce co-channel and adjacent-channel contention within regulatory and band constraints; the operational difference is overlapping channels causing retries versus the scenario's evidence-based Wi-Fi coverage planning.
Question 432
Corporate Wi-Fi remains usable far outside the building, increasing exposure to nearby unauthorized devices. Which radio-frequency or coverage practice best improves wireless security?
- Directional antenna design
- Transmit power reduction
- Wireless site survey
- Channel interference planning
Explanation
Correct Answer
B:Adjusting radio transmit power can reduce unnecessary external coverage while preserving service indoors. Confirm with measurements.
Incorrect Answers
A:Directional antennas shape signal coverage, improving targeted reception and reducing incidental exposure when installed properly; its distinguishing scope is focused Wi-Fi coverage to one area, not the reported excessive wireless signal beyond premises.
C:Site surveys evaluate signal, noise, channel use and placement so power and access points match coverage objectives; that is relevant to evidence-based Wi-Fi coverage planning but does not directly account for excessive wireless signal beyond premises.
D:Channel plans reduce co-channel and adjacent-channel contention within regulatory and band constraints; that is relevant to overlapping channels causing retries but does not directly account for excessive wireless signal beyond premises.
Question 433
Several neighboring access points use overlapping channels and users report high retry counts and low effective throughput. Which radio-frequency or coverage practice best improves wireless security?
- Wireless site survey
- Rogue-radio spectrum analysis
- Channel interference planning
- Transmit power reduction
Explanation
Correct Answer
C:Channel plans reduce co-channel and adjacent-channel contention within regulatory and band constraints. Automated selection still needs oversight.
Incorrect Answers
A:Site surveys evaluate signal, noise, channel use and placement so power and access points match coverage objectives for the specific concern of evidence-based Wi-Fi coverage planning, not the requirement involving overlapping channels causing retries.
B:Spectrum analyzers inspect RF energy beyond decodable Wi-Fi frames, helping identify interference sources for the specific concern of unidentified radio emissions near WLAN, not the requirement involving overlapping channels causing retries.
D:Adjusting radio transmit power can reduce unnecessary external coverage while preserving service indoors; this characterizes excessive wireless signal beyond premises, whereas the reported condition is overlapping channels causing retries.
Question 434
A warehouse must focus coverage along a narrow aisle without widely radiating into surrounding public areas. Which radio-frequency or coverage practice best improves wireless security?
- Channel interference planning
- Transmit power reduction
- Wireless site survey
- Directional antenna design
Explanation
Correct Answer
D:Directional antennas shape signal coverage, improving targeted reception and reducing incidental exposure when installed properly.
Incorrect Answers
A:Channel plans reduce co-channel and adjacent-channel contention within regulatory and band constraints for the specific concern of overlapping channels causing retries, not the requirement involving focused Wi-Fi coverage to one area.
B:Adjusting radio transmit power can reduce unnecessary external coverage while preserving service indoors for situations characterized by excessive wireless signal beyond premises; the case points instead to focused Wi-Fi coverage to one area.
C:Site surveys evaluate signal, noise, channel use and placement so power and access points match coverage objectives; it handles evidence-based Wi-Fi coverage planning, while the decisive evidence in the question is focused Wi-Fi coverage to one area.
Question 435
Operators suspect a non-Wi-Fi device is disrupting WLAN performance even though ordinary access-point logs show no association flood. Which radio-frequency or coverage practice best improves wireless security?
- Rogue-radio spectrum analysis
- Channel interference planning
- Directional antenna design
- Transmit power reduction
- Wireless site survey
Explanation
Correct Answer
A:Spectrum analyzers inspect RF energy beyond decodable Wi-Fi frames, helping identify interference sources. Unmodulated or proprietary interferers may be invisible to ordinary 802.11 frame decoding.
Incorrect Answers
B:Channel plans reduce co-channel and adjacent-channel contention within regulatory and band constraints when analysts encounter overlapping channels causing retries; this question instead describes unidentified radio emissions near WLAN.
C:Directional antennas shape signal coverage, improving targeted reception and reducing incidental exposure when installed properly for the specific concern of focused Wi-Fi coverage to one area, not the requirement involving unidentified radio emissions near WLAN.
D:Adjusting radio transmit power can reduce unnecessary external coverage while preserving service indoors; the operational difference is excessive wireless signal beyond premises versus the scenario's unidentified radio emissions near WLAN.
E:Site surveys evaluate signal, noise, channel use and placement so power and access points match coverage objectives for situations characterized by evidence-based Wi-Fi coverage planning; the case points instead to unidentified radio emissions near WLAN.
Question 436
Visitor phones connect to the same subnet as payroll devices even though internet-only access should be permitted. Which wireless network access policy best addresses the exposure?
- Client isolation on guest WLAN
- Guest SSID VLAN separation
- Wireless captive portal
- Network access reauthentication
Explanation
Correct Answer
B:Guest WLANs need isolation with routing and firewall restrictions to prevent access to internal resources. Separate SSIDs alone are not enough.
Incorrect Answers
A:Client isolation restricts peer communication among associated stations, reducing local lateral attacks; it handles blocking guest-to-guest Wi-Fi traffic, while the decisive evidence in the question is guest-to-corporate network separation.
C:Captive portals control a browser-mediated onboarding step, but they are not equivalent to cryptographically strong Wi-Fi authentication when the underlying evidence concerns browser-based guest access acceptance rather than the stated guest-to-corporate network separation.
D:Session reauthentication or enforced disconnects apply changed identity authorization to established associations; this characterizes expiration of outdated WLAN authorization, whereas the reported condition is guest-to-corporate network separation.
Question 437
Visitors connected to one hotspot can open direct sessions to other visitors' laptops on the same wireless network. Which wireless network access policy best addresses the exposure?
- Client isolation on guest WLAN
- Wireless captive portal
- Network access reauthentication
- Guest SSID VLAN separation
Explanation
Correct Answer
A:Client isolation restricts peer communication among associated stations, reducing local lateral attacks. Gateway access remains available as configured.
Incorrect Answers
B:Captive portals control a browser-mediated onboarding step, but they are not equivalent to cryptographically strong Wi-Fi authentication when the underlying evidence concerns browser-based guest access acceptance rather than the stated blocking guest-to-guest Wi-Fi traffic.
C:Session reauthentication or enforced disconnects apply changed identity authorization to established associations; this characterizes expiration of outdated WLAN authorization, whereas the reported condition is blocking guest-to-guest Wi-Fi traffic.
D:Guest WLANs need isolation with routing and firewall restrictions to prevent access to internal resources; it handles guest-to-corporate network separation, while the decisive evidence in the question is blocking guest-to-guest Wi-Fi traffic.
Question 438
Network operators want authenticated employees assigned to different VLANs according to identity and role on the same SSID. Which wireless network access policy best addresses the exposure?
- Dynamic VLAN assignment
- Guest SSID VLAN separation
- Client isolation on guest WLAN
- Wireless captive portal
Explanation
Correct Answer
A:RADIUS attributes and wireless controller policies can apply role-specific network segments after authentication.
Incorrect Answers
B:Guest WLANs need isolation with routing and firewall restrictions to prevent access to internal resources when analysts encounter guest-to-corporate network separation; this question instead describes identity-dependent VLAN placement.
C:Client isolation restricts peer communication among associated stations, reducing local lateral attacks; this characterizes blocking guest-to-guest Wi-Fi traffic, whereas the reported condition is identity-dependent VLAN placement.
D:Captive portals control a browser-mediated onboarding step, but they are not equivalent to cryptographically strong Wi-Fi authentication; that is relevant to browser-based guest access acceptance but does not directly account for identity-dependent VLAN placement.
Question 439
A contractor remains attached to enterprise Wi-Fi after account revocation because the WLAN never reevaluates access during long sessions. Which wireless network access policy best addresses the exposure?
- Guest SSID VLAN separation
- Client isolation on guest WLAN
- Network access reauthentication
- Wireless captive portal
Explanation
Correct Answer
C:Session reauthentication or enforced disconnects apply changed identity authorization to established associations. Timing and roaming behavior require testing.
Incorrect Answers
A:Guest WLANs need isolation with routing and firewall restrictions to prevent access to internal resources when analysts encounter guest-to-corporate network separation; this question instead describes expiration of outdated WLAN authorization.
B:Client isolation restricts peer communication among associated stations, reducing local lateral attacks; this characterizes blocking guest-to-guest Wi-Fi traffic, whereas the reported condition is expiration of outdated WLAN authorization.
D:Captive portals control a browser-mediated onboarding step, but they are not equivalent to cryptographically strong Wi-Fi authentication when analysts encounter browser-based guest access acceptance; this question instead describes expiration of outdated WLAN authorization.
Question 440
A public library wants guests to acknowledge usage terms before receiving broader guest internet service. Which wireless network access policy best addresses the exposure?
- Guest SSID VLAN separation
- Network access reauthentication
- Client isolation on guest WLAN
- Dynamic VLAN assignment
- Wireless captive portal
Explanation
Correct Answer
E:Captive portals control a browser-mediated onboarding step, but they are not equivalent to cryptographically strong Wi-Fi authentication.
Incorrect Answers
A:Guest WLANs need isolation with routing and firewall restrictions to prevent access to internal resources; it handles guest-to-corporate network separation, while the decisive evidence in the question is browser-based guest access acceptance.
B:Session reauthentication or enforced disconnects apply changed identity authorization to established associations; the operational difference is expiration of outdated WLAN authorization versus the scenario's browser-based guest access acceptance.
C:Client isolation restricts peer communication among associated stations, reducing local lateral attacks; the operational difference is blocking guest-to-guest Wi-Fi traffic versus the scenario's browser-based guest access acceptance.
D:RADIUS attributes and wireless controller policies can apply role-specific network segments after authentication; it handles identity-dependent VLAN placement, while the decisive evidence in the question is browser-based guest access acceptance.