ECCouncil 312-38 (Certified Network Defender) Practice Test 48

Question 470

A newly connected device broadcasts repeated DHCPDISCOVER messages but captures show no DHCPOFFER from the expected service. Which network protocol evidence best explains the connectivity fault?

  1. TCP three-way handshake failure
  2. DHCP discover without offer
  3. TCP reset response
  4. DNS SERVFAIL
  5. ICMP destination unreachable

Explanation

Correct Answer

B:

Missing offers suggest DHCP reachability, server availability or relay problems. A client cannot complete ordinary dynamic addressing without a response.

Incorrect Answers

A:

TCP connection setup needs a successful SYN, SYN-ACK and ACK exchange when the underlying evidence concerns absent SYN-ACK during connection establishment rather than the stated unanswered DHCP address discovery.

C:

TCP RST terminates or rejects a connection; this characterizes explicit reset rather than timeout, whereas the reported condition is unanswered DHCP address discovery.

D:

SERVFAIL indicates the resolver could not complete processing, potentially due to upstream or validation failure when analysts encounter resolver processing failure response; this question instead describes unanswered DHCP address discovery.

E:

ICMP unreachable reports forwarding or delivery failure when generated and allowed; the operational difference is routing failure signaled by ICMP versus the scenario's unanswered DHCP address discovery.

Question 471

A firewall CPU becomes overloaded by very small packets even though total transmitted megabits remain moderate. Which traffic baseline measure best characterizes the observed deviation?

  1. Bits per second
  2. Flow cardinality
  3. Concurrent connection count
  4. Packets per second

Explanation

Correct Answer

D:

Packet rate indicates forwarding work more directly than bandwidth when packet sizes are small. Compare pps to device processing capacity.

Incorrect Answers

A:

Bandwidth utilization in bits per second indicates link saturation risk; it handles traffic volume approaching link capacity, while the decisive evidence in the question is high packet-processing rate with modest bytes.

B:

Unique destination or flow counts can identify scanning and automated propagation; its distinguishing scope is unusual number of distinct destinations, not the reported high packet-processing rate with modest bytes.

C:

Concurrent session counts reflect connection-state pressure distinct from simple bytes or packets; this characterizes excessive simultaneous established sessions, whereas the reported condition is high packet-processing rate with modest bytes.

Question 472

A WAN uplink reaches its provisioned capacity during large backup transfers while packet rate remains within router limits. Which traffic baseline measure best characterizes the observed deviation?

  1. Packets per second
  2. Flow cardinality
  3. Bits per second
  4. Concurrent connection count

Explanation

Correct Answer

C:

Bandwidth utilization in bits per second indicates link saturation risk. Application latency should be correlated with queueing.

Incorrect Answers

A:

Packet rate indicates forwarding work more directly than bandwidth when packet sizes are small; this characterizes high packet-processing rate with modest bytes, whereas the reported condition is traffic volume approaching link capacity.

B:

Unique destination or flow counts can identify scanning and automated propagation for situations characterized by unusual number of distinct destinations; the case points instead to traffic volume approaching link capacity.

D:

Concurrent session counts reflect connection-state pressure distinct from simple bytes or packets; the operational difference is excessive simultaneous established sessions versus the scenario's traffic volume approaching link capacity.

Question 473

A server handles normal request volume but its state table fills with exceptionally long-lived simultaneous client sessions. Which traffic baseline measure best characterizes the observed deviation?

  1. Concurrent connection count
  2. Packets per second
  3. Flow cardinality
  4. Bits per second

Explanation

Correct Answer

A:

Concurrent session counts reflect connection-state pressure distinct from simple bytes or packets. Inspect durations and resource limits.

Incorrect Answers

B:

Packet rate indicates forwarding work more directly than bandwidth when packet sizes are small; the operational difference is high packet-processing rate with modest bytes versus the scenario's excessive simultaneous established sessions.

C:

Unique destination or flow counts can identify scanning and automated propagation when the underlying evidence concerns unusual number of distinct destinations rather than the stated excessive simultaneous established sessions.

D:

Bandwidth utilization in bits per second indicates link saturation risk when the underlying evidence concerns traffic volume approaching link capacity rather than the stated excessive simultaneous established sessions.

Question 474

One host contacts thousands of unique external destination addresses within minutes despite relatively low bytes per destination. Which traffic baseline measure best characterizes the observed deviation?

  1. Round-trip latency
  2. Flow cardinality
  3. Bits per second
  4. Concurrent connection count

Explanation

Correct Answer

B:

Unique destination or flow counts can identify scanning and automated propagation. Context distinguishes discovery tasks from malicious behavior.

Incorrect Answers

A:

RTT measures time for network exchanges and can reveal queueing or path delays; the operational difference is increasing end-to-end network delay versus the scenario's unusual number of distinct destinations.

C:

Bandwidth utilization in bits per second indicates link saturation risk when the underlying evidence concerns traffic volume approaching link capacity rather than the stated unusual number of distinct destinations.

D:

Concurrent session counts reflect connection-state pressure distinct from simple bytes or packets; that is relevant to excessive simultaneous established sessions but does not directly account for unusual number of distinct destinations.

Question 475

A branch app remains reachable but interactive responses become slow after a network change despite no packet-loss alarms. Which traffic baseline measure best characterizes the observed deviation?

  1. Bits per second
  2. Packets per second
  3. Concurrent connection count
  4. Flow cardinality
  5. Round-trip latency

Explanation

Correct Answer

E:

RTT measures time for network exchanges and can reveal queueing or path delays. Application processing time must be separated.

Incorrect Answers

A:

Bandwidth utilization in bits per second indicates link saturation risk; this characterizes traffic volume approaching link capacity, whereas the reported condition is increasing end-to-end network delay.

B:

Packet rate indicates forwarding work more directly than bandwidth when packet sizes are small; that is relevant to high packet-processing rate with modest bytes but does not directly account for increasing end-to-end network delay.

C:

Concurrent session counts reflect connection-state pressure distinct from simple bytes or packets; that is relevant to excessive simultaneous established sessions but does not directly account for increasing end-to-end network delay.

D:

Unique destination or flow counts can identify scanning and automated propagation; that is relevant to unusual number of distinct destinations but does not directly account for increasing end-to-end network delay.

Question 476

One source probes the same TCP service port across hundreds of different internal IP addresses in a short interval. Which network behavior is the most likely analytical finding?

  1. Horizontal port scan
  2. Vertical port scan
  3. Bulk data exfiltration
  4. Periodic command-and-control beacon

Explanation

Correct Answer

A:

Horizontal scanning checks one service across many hosts to discover accessible targets. The destination spread distinguishes it from vertical scanning.

Incorrect Answers

B:

Vertical scanning enumerates multiple services on a single host when analysts encounter many destination ports on one host; this question instead describes same destination port across many hosts.

C:

Large unexplained outbound flows coupled with sensitive source access suggest exfiltration; this characterizes unusual high-volume outbound sensitive transfer, whereas the reported condition is same destination port across many hosts.

D:

Beaconing produces regular callback patterns, often with small payloads; that is relevant to regular short periodic remote callbacks but does not directly account for same destination port across many hosts.

Question 477

A workstation connects to many different ports on one server without an approved vulnerability assessment window. In a separate workstream, the team must also handle regular short periodic remote callbacks. Which TWO of the listed methods or controls correspond to these distinct requirements? Choose TWO.

  1. Vertical port scan
  2. Horizontal port scan
  3. Periodic command-and-control beacon
  4. Bulk data exfiltration

Explanation

Correct Answers

A:

Vertical scanning enumerates multiple services on a single host; for this multi-part scenario, the pertinent observation is many destination ports on one host.

C:

Beaconing produces regular callback patterns, often with small payloads; this specifically explains regular short periodic remote callbacks among the independent requirements in the combined case.

Incorrect Answers

B:

Horizontal scanning checks one service across many hosts to discover accessible targets; its distinguishing scope is same destination port across many hosts, not the reported many destination ports on one host and regular short periodic remote callbacks.

D:

Large unexplained outbound flows coupled with sensitive source access suggest exfiltration; the operational difference is unusual high-volume outbound sensitive transfer versus the scenario's many destination ports on one host and regular short periodic remote callbacks.

Question 478

A workstation emits numerous long high-entropy DNS labels to one unusual domain and receives regular encoded-looking replies. Which network behavior is the most likely analytical finding?

  1. Horizontal port scan
  2. DNS tunneling
  3. Bulk data exfiltration
  4. Vertical port scan

Explanation

Correct Answer

B:

DNS tunneling encodes data inside DNS requests and responses to cross network controls. Query length and timing can be useful indicators.

Incorrect Answers

A:

Horizontal scanning checks one service across many hosts to discover accessible targets; its distinguishing scope is same destination port across many hosts, not the reported suspicious encoded subdomains in DNS.

C:

Large unexplained outbound flows coupled with sensitive source access suggest exfiltration; the operational difference is unusual high-volume outbound sensitive transfer versus the scenario's suspicious encoded subdomains in DNS.

D:

Vertical scanning enumerates multiple services on a single host for situations characterized by many destination ports on one host; the case points instead to suspicious encoded subdomains in DNS.

Question 479

A desktop makes very short outbound connections to the same unfamiliar endpoint approximately every five minutes throughout the night. Which network behavior is the most likely analytical finding?

  1. Vertical port scan
  2. Horizontal port scan
  3. DNS tunneling
  4. Periodic command-and-control beacon

Explanation

Correct Answer

D:

Beaconing produces regular callback patterns, often with small payloads. Compare schedules with approved monitoring agents before escalation.

Incorrect Answers

A:

Vertical scanning enumerates multiple services on a single host in a setting defined by many destination ports on one host; the observed issue is regular short periodic remote callbacks.

B:

Horizontal scanning checks one service across many hosts to discover accessible targets; this characterizes same destination port across many hosts, whereas the reported condition is regular short periodic remote callbacks.

C:

DNS tunneling encodes data inside DNS requests and responses to cross network controls; that is relevant to suspicious encoded subdomains in DNS but does not directly account for regular short periodic remote callbacks.

Question 480

A user endpoint sends an unexpected multi-gigabyte outbound transfer to an unapproved host following mass access to confidential files. Which network behavior is the most likely analytical finding?

  1. DNS tunneling
  2. Horizontal port scan
  3. Bulk data exfiltration
  4. Periodic command-and-control beacon
  5. Vertical port scan

Explanation

Correct Answer

C:

Large unexplained outbound flows coupled with sensitive source access suggest exfiltration. Destination legitimacy and application context require investigation.

Incorrect Answers

A:

DNS tunneling encodes data inside DNS requests and responses to cross network controls for the specific concern of suspicious encoded subdomains in DNS, not the requirement involving unusual high-volume outbound sensitive transfer.

B:

Horizontal scanning checks one service across many hosts to discover accessible targets when the underlying evidence concerns same destination port across many hosts rather than the stated unusual high-volume outbound sensitive transfer.

D:

Beaconing produces regular callback patterns, often with small payloads; its distinguishing scope is regular short periodic remote callbacks, not the reported unusual high-volume outbound sensitive transfer.

E:

Vertical scanning enumerates multiple services on a single host; the operational difference is many destination ports on one host versus the scenario's unusual high-volume outbound sensitive transfer.

Certified Network Defender (312-38) Practice Tests