Fortinet FCP_FSM_AN-7.2 (FCP - FortiSIEM 7.2 Analyst) Practice Test 24

Question 230

For the response to an incident affecting host-76, in Manufacturing, a remediation script runs from a Collector against the affected FortiGate firewall. Which component is the Enforce On Device in the FortiSIEM terminology?

  1. The target managed device where the change is applied
  2. The Collector that launches the script
  3. The user who clicked the incident row
  4. The historical Analytics search result table

Explanation

Correct Answer

A:

In remediation operation at Manufacturing for host-76: The FortiGate firewall is the Enforce On endpoint that receives the security action; its CMDB entry, credentials and supported protocol are material.

Incorrect Answers

B:

For remediation operation at Manufacturing for host-76: The Collector may be Run On, but it is not the affected target when the remediation actually modifies the FortiGate firewall.

C:

Considering remediation operation at Manufacturing for host-76: The human operator initiates an ad hoc action but does not become the managed endpoint on which the change is enforced.

D:

Under remediation operation at Manufacturing for host-76: Event results provide evidence, not the device address and management channel where the script applies block a malicious source address.

Question 231

At Cloud Services, the analyst wants to correlate roaming.p behavior across VPN and identity-provider logs. Which prerequisite makes this a meaningful UEBA investigation?

  1. Block all identity-provider collection while preserving only CMDB
  2. Group solely by log source filename without user fields
  3. Normalize identity attributes and map events to a consistent user entity
  4. Replace every user name with an unrelated constant

Explanation

Correct Answer

C:

Considering entity-behavior risk evaluation at Cloud Services: UEBA analysis relies on linking actions by the same identity. Consistent user fields across the VPN and identity providers support a consolidated behavior trail.

Incorrect Answers

A:

CMDB inventory cannot reconstruct roaming.p cross-source activity after the relevant authentication events are omitted.

B:

Grouping files can count ingestion but does not join actions to roaming.p across the distinct platforms.

D:

Under entity-behavior risk evaluation at Cloud Services: Overwriting identities destroys the ability to identify the distinct user whose behavior diverges from baseline.

Question 232

A North Finance analyst is already searching policy violation events in firewall session logs, but only wants records whose reporting devices have CMDB device location=critical. How can event selection incorporate inventory context?

  1. Compare the raw event keyword against the word device location only
  2. Set incident severity to critical before running the query
  3. Group the events by ingestion timestamp alone
  4. Reference CMDB device properties through the supported event/CMDB query mechanism

Explanation

Correct Answer

D:

FortiSIEM combined Event/CMDB searches and DeviceToCMDBAttr-style access can apply inventory properties such as device location to event evidence.

Incorrect Answers

A:

Unless that property is present in every raw firewall session logs message, keyword text cannot reliably enforce the CMDB-derived criticality constraint.

B:

Incident severity is an alert attribute; it does not add the device location predicate to existing event-search matches.

C:

Changing time granularity does not test whether the reporting device has the required CMDB device location value.

Question 233

Manufacturing receives user records where the same person appears as svc.backup and with a domain-qualified login variant. What most improves entity-centered UEBA aggregation?

  1. Group by the complete raw message body
  2. Reconcile aliases or normalized identity mapping so the records resolve to the same account
  3. Create a new firewall interface for each alias
  4. Disable entity tracking when aliases are detected

Explanation

Correct Answer

B:

Consistent identity keys prevent one account from being split into artificial entities. This improves risk rollups and user-focused rules for svc.backup.

Incorrect Answers

A:

In entity-behavior risk evaluation at Manufacturing: Raw messages vary by source and formatting, so this would not consistently join two names for the same user.

C:

Considering entity-behavior risk evaluation at Manufacturing: Network interfaces are not identity reconciliation mechanisms within FortiSIEM UEBA analytics.

D:

Under entity-behavior risk evaluation at Manufacturing: Disabling the relevant enrichment prevents the desired multi-source behavior analysis for the user.

Question 234

A FortiSIEM correlation design at Partner Services observes P1 (permission failure in database audit records) and P2 (a related action on host-163). It must require P1 and then P2 in that order. Which relationship operator best expresses that precise condition?

  1. AND-NOT
  2. NOT-FOLLOWED-BY
  3. FOLLOWED-BY
  4. OR
  5. AND

Explanation

Correct Answer

C:

FOLLOWED-BY enforces P1 occurring before P2. It captures ordered attack-stage progression for host-163 rather than unordered coincidence.

Incorrect Answers

A:

In subpattern correlation at Partner Services for host-163 using database audit records: AND-NOT requires P1 while P2 is absent, without making absence conditional on a later P2. This distinction matters in the Partner Services event sequence.

B:

For subpattern correlation at Partner Services for host-163 using database audit records: NOT-FOLLOWED-BY requires P1 and no P2 afterward in the evaluated rule period. It tests lack of follow-up, distinct from unordered AND-NOT.

D:

Under subpattern correlation at Partner Services for host-163 using database audit records: OR permits either P1 or P2 to satisfy the rule. It is suited to alternative signals, not a requirement that both occur or that a later stage be missing.

E:

In subpattern correlation at Partner Services for host-163 using database audit records: AND demands both patterns without specifying sequence. It fits only when simultaneous presence, rather than temporal ordering or absence, is the intended Partner Services test.

Question 235

A rule at Corporate HQ should trigger when P1 (unauthorized change) occurs and a P2 recovery indicator does NOT arrive later in the configured evaluation window. Which operator distinguishes later absence from unordered exclusion?

  1. AND-NOT
  2. NOT-FOLLOWED-BY
  3. FOLLOWED-BY
  4. OR

Explanation

Correct Answer

B:

This operator evaluates the existence of P1 and the absence of a subsequent P2. The temporal relationship is central to the missing-recovery use case on host-138.

Incorrect Answers

A:

AND-NOT expresses P1 with P2 absent but lacks the same directional later-event condition for host-138.

C:

Considering subpattern correlation at Corporate HQ: FOLLOWED-BY requires the very P2 recovery event that the unresolved-fault detector says must be absent.

D:

Under subpattern correlation at Corporate HQ: OR treats either P1 or P2 as enough, including a standalone recovery event that should not represent unresolved failure.

Question 236

Manufacturing wants a rule on host-32 that triggers only when at least three matched performance samples have mean CPU utilization above 76%. Which subpattern condition expresses both requirements?

  1. COUNT(DISTINCT Host) >= 3
  2. COUNT(Matched Events) >= 3 AND AVG(CPU Util) > 76
  3. MAX(CPU Util) > 76 with no sample count
  4. COUNT(Matched Events) >= 3 OR AVG(CPU Util) > 76

Explanation

Correct Answer

B:

The first aggregate protects against a one-sample spike; the second tests actual average load. Both are evaluated in the host-32 group.

Incorrect Answers

A:

Three distinct hosts are not required. The question concerns at least three samples on the same host-32.

C:

Considering subpattern correlation at Manufacturing for host-32: Only the maximum is tested, so one outlier can trigger even if the average and minimum sample count do not qualify.

D:

Under subpattern correlation at Manufacturing for host-32: OR allows a three-sample low-CPU set or a single high-CPU sample to trigger, violating the combined requirements.

Question 237

Cloud Services requires a help-desk ticket or external integration for deny incidents instead of only email. Which Automation Policy capability addresses external workflow?

  1. Add a search display field named ticket
  2. Reduce the raw log size to fit an email attachment
  3. Rename the impacted device to match the help-desk queue
  4. Select a supported integration, ticketing or HTTP/SNMP notification action

Explanation

Correct Answer

D:

For Cloud Services requires a help-desk ticket or external integration for deny incidents instead of only email. Which: Under Automation Policy workflow at Cloud Services: FortiSIEM policies can invoke integration policies and supported notification channels, allowing the incident to enter the response system used by Cloud Services.

Incorrect Answers

A:

In Automation Policy workflow at Cloud Services: An Analytics column does not contact a ticket service or deliver the deny incident outside the search result.

B:

For Automation Policy workflow at Cloud Services: External action selection does not depend on truncating the source gateway denies record as the mechanism of ticket creation.

C:

Considering Automation Policy workflow at Cloud Services: Device names are contextual identifiers, not a substitute for configuring the requested external integration action.

Question 238

Logistics requires an alert when any one User from identity provider events contacts at least 5 distinct Application values within the query window. Which expression and grouping combination implements the requirement?

  1. No Group By; COUNT(DISTINCT Application) >= 5
  2. Group By Application; COUNT(DISTINCT User) >= 5
  3. Group By User; COUNT(Matched Events) >= 5
  4. Group By User; COUNT(DISTINCT Application) >= 5

Explanation

Correct Answer

D:

The grouping keeps each source independent and the distinct count measures unique Application values. The threshold of 5 applies to each source’s destinations.

Incorrect Answers

A:

In aggregate-query calculation at Logistics using identity provider events with the specified 5 value: Global distinct target count mixes all sources and cannot identify whether any one User meets the requirement.

B:

For aggregate-query calculation at Logistics using identity provider events with the specified 5 value: This detects a popular destination reached by many sources, the reverse relationship of the requested per-source fan-out.

C:

Repeated traffic to a single destination can satisfy raw event count without reaching 5 unique Application values.

Question 239

Corporate HQ wants to distinguish the busiest Host by events in a Windows security logs query. A single source has 13 records spread across three User values with counts 6, 6, and 1. Which statistic will rank sources by traffic-event frequency?

  1. COUNT(DISTINCT User) grouped by source
  2. SUM(Source Port) across all sources
  3. AVG(CPU Util) grouped by source
  4. COUNT(Matched Events) grouped by source

Explanation

Correct Answer

D:

Under aggregate-query calculation at Corporate HQ using Windows security logs with the specified 13 value: This measures 13 matching rows for the source, including repeats to the three destinations, which is the frequency metric requested.

Incorrect Answers

A:

In aggregate-query calculation at Corporate HQ using Windows security logs with the specified 13 value: Only three destination values exist. Distinct destination count is a fan-out metric and ignores the 13 individual event occurrences.

B:

For aggregate-query calculation at Corporate HQ using Windows security logs with the specified 13 value: Source ports are labels rather than additive traffic quantities. Summing them across the full search would not produce a meaningful per-source frequency.

C:

Considering aggregate-query calculation at Corporate HQ using Windows security logs with the specified 13 value: CPU measures resource utilization rather than the frequency of Windows security logs events; it cannot rank sources by event traffic.

Question 240

Manufacturing wants notifications for LOW connection incidents, but not for incidents of other severities from the same rule. Which automation-policy criterion should be set?

  1. A larger Analytics result-row limit
  2. Changing the reporting device hostname
  3. An unqualified selection of all incident categories
  4. Severity selection matching LOW

Explanation

Correct Answer

D:

Under Automation Policy workflow at Manufacturing: The policy can select one or more incident severities. Restricting it to LOW controls delivery without altering the rule’s triggering conditions.

Incorrect Answers

A:

For Manufacturing wants notifications for LOW connection incidents, but not for incidents of other severities from the same: In Automation Policy workflow at Manufacturing: Query row limits affect display, not whether the Automation Policy sends an alert based on severity.

B:

For Automation Policy workflow at Manufacturing: Device identity changes are unrelated to choosing which severity values qualify for notification.

C:

Considering Automation Policy workflow at Manufacturing: Categories alone do not enforce the required LOW boundary; other-severity alerts may still notify.

FCP - FortiSIEM 7.2 Analyst (FCP_FSM_AN-7.2) Practice Tests