Fortinet FCP_FSM_AN-7.2 (FCP - FortiSIEM 7.2 Analyst) Practice Test 74

Question 730

For Partner Services the two Host groups contain 7 and 3 unauthorized change events. The analyst needs total event count per Host, without mixing the sources. Which pair of settings is necessary?

  1. Group By Host and show COUNT(Matched Events)
  2. Group By File Path and show AVG(Sent Bytes)
  3. Filter to one Host before counting and treat it as the whole result
  4. Show only COUNT(Matched Events) without a Group By attribute

Explanation

Correct Answer

A:

In aggregate-query calculation at Partner Services with the specified 7 value: Host partitions the matching events into independent groups while COUNT tallies their individual 7 and 3 records.

Incorrect Answers

B:

For aggregate-query calculation at Partner Services with the specified 7 value: This would summarize a different dimension and average traffic volume rather than count unauthorized change events per Host.

C:

Considering aggregate-query calculation at Partner Services with the specified 7 value: Excluding the other source can produce one count but cannot satisfy the simultaneous side-by-side Host comparison.

D:

For For Partner Services the two Host groups contain 7 and 3 unauthorized change events. The analyst needs total event count per: Under aggregate-query calculation at Partner Services with the specified 7 value: A global COUNT collapses the 10 events together and loses the separate per-Host quantities.

Question 731

An MSSP analyst is authorized to inspect Cloud Services only. A query for connection events from network flow records unexpectedly includes tenant peers. Which search setting should be restricted?

  1. Increase the maximum rows returned by the search
  2. Select the intended organization in the service-provider search scope
  3. Add a display column showing the event time
  4. Group the mixed result by Source IP

Explanation

Correct Answer

B:

FortiSIEM service-provider searches support organization selection. Constraining scope to Cloud Services prevents the query from including the other tenants’ event sets.

Incorrect Answers

A:

Row limits affect truncation, not data tenancy; a higher limit would reveal more mixed-tenant events instead of isolating Cloud Services.

C:

Considering historical or real-time event analysis at Cloud Services using network flow records: Event timestamps assist investigation but do not replace the search’s organization selection when isolating one customer.

D:

Grouping by Source IP reorganizes the already selected records and does not enforce the organizational boundary for Cloud Services.

Question 732

A Research rule must add a Source IP address from a blocked lookup incident to a watchlist whose declared element type is IP. The incident attribute is a string label instead. What should be verified?

  1. The rule incident title includes the word IP
  2. The watchlist type matches the type of the incident attribute written to it
  3. The historical search uses a 30-day default range
  4. The rule has at least three different email recipients

Explanation

Correct Answer

B:

For correlation-rule investigation at Research: FortiSIEM rejects incompatible watchlist/incident attribute types. An IP watchlist expects a compatible IP-type incident value, not an unrelated string label.

Incorrect Answers

A:

In correlation-rule investigation at Research: Free-text title labels cannot change the underlying attribute type used for watchlist updates.

C:

Considering correlation-rule investigation at Research: Search time horizon does not convert a string incident attribute to an IP-type watchlist entry.

D:

Under correlation-rule investigation at Research: Email fan-out has no effect on the type compatibility of a Source IP entry stored in the IP watchlist.

Question 733

An analyst drills from a rejected request event on host-199 into Analytics and wants the query to follow the event’s existing normalized API Operation value. Which starting technique minimizes transcription errors?

  1. Switch from Analytics to an empty CMDB inventory view
  2. Change the incident severity before running any search
  3. Use a random keyword unrelated to the opened event
  4. Build or refine a search directly from the selected event attributes

Explanation

Correct Answer

D:

Starting from an event helps carry the concrete parsed API Operation context into the new search, avoiding manual retyping of the value for host-199.

Incorrect Answers

A:

In historical or real-time event analysis at the SOC for host-199: Inventory can supplement the investigation but does not inherit the event’s normalized field-value combination into a search.

B:

For historical or real-time event analysis at the SOC for host-199: Severity influences priority but not the initial search predicate or its connection to the selected event attributes.

C:

An unrelated raw-text keyword cannot reliably reproduce the selected API Operation context and is likely to change which records match.

Question 734

FortiSIEM returns individual Windows security logs rows for Cloud Services; the analyst now wants a per-Host summary with aggregate values while retaining the same failed sign-in filter. Which portion of search configuration changes?

  1. Replace the event search with a pure CMDB search
  2. Only switch raw logs to a different parser
  3. Group By and Display Fields with the required aggregate expressions
  4. Change the notification target of the associated rule

Explanation

Correct Answer

C:

Grouping creates one result per Host value and aggregated displays compute measures over matching failed sign-in events, without needing a new ingestion configuration.

Incorrect Answers

A:

CMDB focuses on inventory attributes and cannot compute the requested event aggregates over the selected failed sign-in rows.

B:

Parser configuration affects field normalization; it is not the way to summarize an already-correct Windows security logs result set by Host.

D:

Under historical or real-time event analysis at Cloud Services using Windows security logs: Notification routing acts after incident detection and does not transform a search result into grouped aggregate output.

Question 735

A Corporate HQ rule for policy violation uses two subpatterns and should fire only if subpattern P1 occurs before P2 for the same Source IP. Which rule relationship expresses the order?

  1. AND
  2. AND-NOT
  3. FOLLOWED-BY
  4. OR

Explanation

Correct Answer

C:

Considering correlation-rule investigation at Corporate HQ: FOLLOWED-BY requires P1 first and P2 later. Correlating the matching Source IP attributes further keeps the ordered events tied to one actor.

Incorrect Answers

A:

In correlation-rule investigation at Corporate HQ: AND requires both patterns but does not enforce their order; P2 could precede P1 for this policy violation activity.

B:

For correlation-rule investigation at Corporate HQ: AND-NOT expresses presence of P1 and absence of P2, the opposite of requiring a later P2 stage.

D:

Under correlation-rule investigation at Corporate HQ: OR triggers when either pattern appears, so the complete two-stage sequence for Corporate HQ is not required.

Question 736

Logistics requires an alert when any one Source IP from SSH audit logs contacts at least 7 distinct Destination Host values within the query window. Which expression and grouping combination implements the requirement?

  1. No Group By; COUNT(DISTINCT Destination Host) >= 7
  2. Group By Destination Host; COUNT(DISTINCT Source IP) >= 7
  3. Group By Source IP; COUNT(Matched Events) >= 7
  4. Group By Source IP; COUNT(DISTINCT Destination Host) >= 7

Explanation

Correct Answer

D:

The grouping keeps each source independent and the distinct count measures unique Destination Host values. The threshold of 7 applies to each source’s destinations.

Incorrect Answers

A:

In aggregate-query calculation at Logistics using SSH audit logs with the specified 7 value: Global distinct target count mixes all sources and cannot identify whether any one Source IP meets the requirement.

B:

For aggregate-query calculation at Logistics using SSH audit logs with the specified 7 value: This detects a popular destination reached by many sources, the reverse relationship of the requested per-source fan-out.

C:

Repeated traffic to a single destination can satisfy raw event count without reaching 7 unique Destination Host values.

Question 737

For Partner Services the two Host groups contain 7 and 3 suspicious launch events. The analyst needs total event count per Host, without mixing the sources. Which pair of settings is necessary?

  1. Filter to one Host before counting and treat it as the whole result
  2. Group By Host and show COUNT(Matched Events)
  3. Group By Process Name and show AVG(Sent Bytes)
  4. Show only COUNT(Matched Events) without a Group By attribute

Explanation

Correct Answer

B:

For aggregate-query calculation at Partner Services with the specified 7 value: Host partitions the matching events into independent groups while COUNT tallies their individual 7 and 3 records.

Incorrect Answers

A:

In aggregate-query calculation at Partner Services with the specified 7 value: Excluding the other source can produce one count but cannot satisfy the simultaneous side-by-side Host comparison.

C:

Considering aggregate-query calculation at Partner Services with the specified 7 value: This would summarize a different dimension and average traffic volume rather than count suspicious launch events per Host.

D:

For For Partner Services the two Host groups contain 7 and 3 suspicious launch events. The analyst needs total event count per: Under aggregate-query calculation at Partner Services with the specified 7 value: A global COUNT collapses the 10 events together and loses the separate per-Host quantities.

Question 738

The City Branch SOC should receive blocked request alerts only during its shift beginning at 21:00. Other conditions are correct. Which policy dimension controls when notifications are sent?

  1. The report Trend Interval
  2. The Automation Policy Time Range
  3. The incident’s raw message length
  4. The CMDB display-column ordering

Explanation

Correct Answer

B:

FortiSIEM evaluates the policy’s effective notification window, so matching blocked request incidents outside the configured City Branch shift need not trigger this action.

Incorrect Answers

A:

In Automation Policy workflow at City Branch with the specified 21 value: A query trend interval changes how historical events are bucketed and cannot schedule when incident notifications should be delivered.

C:

Number of bytes in a raw web application alerts record does not encode the analyst team’s effective working hours.

D:

Under Automation Policy workflow at City Branch with the specified 21 value: Changing inventory columns does not define an Automation Policy time schedule for notifications.

Question 739

North Finance / host-132: a critical incident must trigger both an analyst notification and a permitted automated response. Which distinct controls must be correctly set? Choose TWO.

  1. Use the old Notification Policy label as proof 7.2 action configuration is unnecessary
  2. Attach both a supported notification action and an approved remediation action
  3. Configure incident-matching Automation Policy conditions
  4. Enable a blank rule with no incident definition
  5. Assume a search query automatically sends both responses

Explanation

Correct Answers

B:

The policy must explicitly include the two response operations with valid recipients and vetted remediation prerequisites.

C:

The policy’s conditions target the required incident class and prevent the unauthorized change action from running on unrelated alerts.

Incorrect Answers

A:

FortiSIEM 7.2 uses Automation Policies; legacy terminology cannot eliminate the explicit criteria and action settings.

D:

An unconfigured rule cannot reliably produce the incident that should drive the Automation Policy.

E:

Analytics queries return data; they do not by themselves perform incident-policy notification and remediation.

Question 740

An incident analyst must calculate total outbound byte volume for a User group in database audit records. The three matched records carry 480, 650, and 360 sent bytes. Which aggregator belongs in the query?

  1. MIN(Sent Bytes)
  2. COUNT(DISTINCT Sent Bytes)
  3. SUM(Sent Bytes)
  4. AVG(Sent Bytes)

Explanation

Correct Answer

C:

SUM adds event-measured byte quantities, producing 1490 bytes for the selected User. This measures total transferred volume rather than the number of rows.

Incorrect Answers

A:

In aggregate-query calculation at the SOC using database audit records with the specified 480 value: MIN yields only 360 bytes, the smallest observed transfer; it excludes the other two contributions.

B:

For the measured records containing 480, 650, and 360 sent bytes: For aggregate-query calculation at the SOC using database audit records with the specified 480 value: Counting unique numeric byte values asks how many different sizes appeared, not how much traffic crossed the link for North Finance.

D:

Under aggregate-query calculation at the SOC using database audit records with the specified 480 value: AVG yields 496.7 bytes per record; it is useful for average transfer size but understates the requested combined volume.

FCP - FortiSIEM 7.2 Analyst (FCP_FSM_AN-7.2) Practice Tests