Fortinet FCP_FSM_AN-7.2 (FCP - FortiSIEM 7.2 Analyst) Practice Test 88

Question 870

The Logistics investigation tracks two events in SSH audit logs: a denied login P1 followed by a successful login P2. The rule is incorrectly matching different users. Which inter-subpattern constraint should be added?

  1. Removal of all grouping keys and inter-subpattern constraints
  2. A greater-than test between the two event message lengths
  3. Equality between the relevant Source IP identity attributes of P1 and P2
  4. Only a larger incident title text field

Explanation

Correct Answer

C:

Considering subpattern correlation at Logistics using SSH audit logs: Inter-subpattern comparisons link matching entity keys across both behaviors. Requiring the same Source IP prevents a different user’s P2 from completing this sequence.

Incorrect Answers

A:

Eliminating identity comparison makes cross-user false matches more likely in Logistics, not less.

B:

For subpattern correlation at Logistics using SSH audit logs: Message length does not establish user or entity identity for the P1–P2 correlation.

D:

Under subpattern correlation at Logistics using SSH audit logs: Title length affects labeling and cannot prevent a P2 from another Source IP being joined to the first event.

Question 871

A West Operations report groups failed authentication events by User and uses COUNT(Matched Events). The analyst wants only groups exceeding 5 events to remain in the result, not to remove the underlying records before aggregation. What should be configured?

  1. A time range of exactly 5 seconds
  2. A Display Condition of COUNT(Matched Events) > 5
  3. An event filter that rejects all records until their count exceeds 5
  4. Group By COUNT(Matched Events) instead of User

Explanation

Correct Answer

B:

For A West Operations report groups failed authentication events by User and uses COUNT(Matched Events). The analyst wants only: For aggregate-query calculation at West Operations with the specified 5 value: FortiSIEM display conditions filter aggregates after grouping, analogous to HAVING. Groups must first be counted, then those above 5 remain visible.

Incorrect Answers

A:

In aggregate-query calculation at West Operations with the specified 5 value: The literal threshold is a count of records, not a query time window. Shortening time would alter which failed authentication events are included.

C:

Considering aggregate-query calculation at West Operations with the specified 5 value: An event filter evaluates record attributes before aggregation. Individual VPN authentication records events do not carry the completed group count to filter on.

D:

For A West Operations report groups failed authentication events by User and uses COUNT(Matched Events). The analyst wants only: Under aggregate-query calculation at West Operations with the specified 5 value: COUNT is the measure to test, while User defines the groups whose counts are compared; swapping these loses the per-source view.

Question 872

A search for unauthorized change in file integrity alerts is too broad because records where Host matches an approved address must also have File Path in a restricted set. Which filter logic meets both requirements?

  1. Combine the Host condition OR the File Path condition
  2. Group by Host and File Path without applying attribute filters
  3. Combine the Host condition AND the File Path condition with appropriate parentheses
  4. Use a longer trend interval as the only change

Explanation

Correct Answer

C:

Both attribute tests must hold for each accepted file integrity alerts record. Conjunction plus explicit grouping prevents a broad OR path from leaking records outside the restricted set.

Incorrect Answers

A:

OR accepts records that satisfy only one test, so North Finance would receive results not meeting the two simultaneous restrictions.

B:

For historical or real-time event analysis at the SOC using file integrity alerts: Grouping describes matching results after selection; it does not require either attribute to meet the approved conditions.

D:

Changing the trend interval affects time buckets, not whether Host and File Path must both pass their filters.

Question 873

East Retail wants to use a rise in privileged.e risk as an analytic signal before escalating an incident. Which practice limits false positives?

  1. Ignore the current rule evaluation window
  2. Delete the source events to simplify the dashboard
  3. Treat the risk number as conclusive proof without corroboration
  4. Inspect the underlying events, identity correlation, time window and risk contributors

Explanation

Correct Answer

D:

UEBA scores summarize evidence; an analyst should confirm the events and context behind privileged.e before concluding that an escalation is warranted.

Incorrect Answers

A:

Without checking the temporal scope, older privileged.e events might be confused with a currently active behavior change.

B:

For entity-behavior risk evaluation at East Retail: Removing evidence impairs both validation and future behavior baselines, undermining triage accuracy.

C:

Considering entity-behavior risk evaluation at East Retail: Scores are indicators rather than deterministic proof of compromise, and can be affected by unusual but authorized behavior.

Question 874

A Partner Services rule tracks elevated risk for privileged.e, and the SOC wants a dashboard filter showing only the tagged subset. What should be preserved in the query?

  1. Only a report title that contains the word risk
  2. The UEBA tag/entity attribute and the filter that selects the intended population
  3. A notification recipient email as the aggregation key
  4. An unconditional count of all tenants’ unrelated events

Explanation

Correct Answer

B:

A useful dashboard needs the same tag or entity identity carried through the rule/event model. Filtering by that attribute isolates the relevant privileged.e activity.

Incorrect Answers

A:

In entity-behavior risk evaluation at Partner Services: Human-readable text does not itself filter data by the underlying user tag or risk attribute.

C:

Considering entity-behavior risk evaluation at Partner Services: Notification recipients identify delivery targets, not the entity attribute used to filter UEBA telemetry.

D:

Broad counts mix unrelated observations and obscure the selected Partner Services tagged behavior.

Question 875

City Branch / host-95: a repeating benign stopped service finding was triaged and the SOC must keep an auditable disposition without wiping historical event evidence. Which operations are legitimate? Choose TWO.

  1. Assume a false-positive verdict alone fixes an overbroad correlation rule
  2. Keep the event timeline and annotations available for later rule tuning
  3. Remove all FortiSIEM data for the affected tenant
  4. Call the event false positive but also assert it is confirmed malicious without evidence
  5. Set the appropriate false-positive resolution on the incident

Explanation

Correct Answers

B:

Historical event evidence and case notes help explain why the stopped service pattern should be tuned or excepted.

E:

The status records the analyst’s assessment that the matching service health records signal was not a real security incident.

Incorrect Answers

A:

Incident disposition captures triage; a separate rule edit or exception may be needed to prevent repeats.

C:

Mass deletion is disproportionate and eliminates records needed for future investigations and auditing.

D:

Conflicting dispositions make case history unreliable and do not address the approved benign explanation.

Question 876

Cloud Services wants an active policy violation incident on host-196 to clear after the original rule has not triggered for 20 minutes. The rule is a real-time rule. Which clear-condition option fits?

  1. Increase notification frequency to one message per minute
  2. Exception effective for 20 minutes starting now
  3. Change the incident title to Resolved but leave status Active
  4. Original Rule Does Not Trigger with a 20-minute clear period

Explanation

Correct Answer

D:

Under rule deployment or exception at Cloud Services for host-196: The clear timer waits for the specified duration without another rule match, then changes the incident state when the condition is satisfied.

Incorrect Answers

A:

In rule deployment or exception at Cloud Services for host-196: Notification cadence affects delivery only; it cannot use quiet time to clear the incident.

B:

An exception suppresses future matching incidents; it is not equivalent to clearing an already-active host-196 alert after inactivity.

C:

Renaming an incident is not a status transition and provides no test of whether policy violation stopped.

Question 877

For an audit of blocked request events in web application alerts, Logistics must investigate activity from exactly 40 minutes ago and compute counts by Source IP. Which search design preserves that requirement?

  1. Search only the raw event keyword without selecting a time range
  2. Real-time streaming search with Group By
  3. Historical event search, time window, then Group By on the specified field
  4. CMDB search with no event criteria

Explanation

Correct Answer

C:

Stored events can be bounded to the requested 40-minute historical interval, and grouping by Source IP summarizes the matching records for this audit.

Incorrect Answers

A:

A keyword alone does not specify the 40-minute historical boundary or the grouped output that the audit requires.

B:

Streaming search is designed for arriving data and does not allow Group By; it cannot reliably reconstruct the 40-minute stored period.

D:

Inventory records may identify devices but have no event-count dataset for web application alerts and the requested Source IP grouping.

Question 878

A query in Logistics correctly selects CMDB devices with asset class=production, but the output must also show owner and location fields for triage. What should be added to the CMDB search?

  1. Relevant CMDB attributes as display fields
  2. A manual-clear action on every displayed device
  3. An event-count threshold to suppress all devices with no recent logs
  4. A subpattern FOLLOWED-BY relationship between owner and location

Explanation

Correct Answer

A:

In CMDB and lookup-table configuration at Logistics: Display selections expose owner and location for the already-matched inventory objects without changing the asset class=production predicate.

Incorrect Answers

B:

Manually clearing incidents is an independent workflow and does not add the requested inventory columns to Logistics output.

C:

Considering CMDB and lookup-table configuration at Logistics: Filtering by event count changes the population and may remove quiet production assets that still belong in the requested CMDB list.

D:

Under CMDB and lookup-table configuration at Logistics: Temporal rule operators relate event patterns, not static owner and location columns in a device inventory query.

Question 879

For the response to an incident affecting host-154, an Logistics analyst confirms a failed login incident and wants to execute a one-time approved remediation on a FortiGate firewall while supervising its effect. Which FortiSIEM workflow fits?

  1. Attach a global automatic script to every rule without approval
  2. Delete the original {kind} raw event records
  3. Select the incident and initiate an ad hoc remediation action from Incidents
  4. Only change the incident category to Remediated

Explanation

Correct Answer

C:

Considering remediation operation at Logistics for host-154: FortiSIEM supports incident-specific manual/scripted remediation. The analyst can select the affected FortiGate firewall and validate the effect before repeating the action.

Incorrect Answers

A:

In remediation operation at Logistics for host-154: Unrestricted automation would apply the action to unrelated incidents, conflicting with the explicitly supervised one-time Logistics response.

B:

For remediation operation at Logistics for host-154: Evidence deletion does not contain or recover the affected FortiGate firewall; it also weakens investigation and auditability.

D:

Under remediation operation at Logistics for host-154: Labels do not execute a device action; the FortiGate firewall would remain in its original state despite the category change.

Question 880

FortiSIEM has three CPU utilization samples for host-127 in Research: 60%, 40%, and 50%. The rule should compare mean utilization across samples. Which search expression evaluates the required statistic?

  1. AVG(CPU Util)
  2. MAX(CPU Util)
  3. SUM(CPU Util)
  4. COUNT(Matched Events)

Explanation

Correct Answer

A:

AVG calculates the arithmetic mean: (60 + 40 + 50) / 3 = 50.0%. This matches the average-utilization objective for host-127.

Incorrect Answers

B:

For aggregate-query calculation at Research for host-127: MAX returns 60%, the single highest observation. A transient spike can exceed the mean, so it does not characterize all three samples.

C:

SUM adds the sample percentages to 150; the total is not mean utilization and would distort a percentage threshold.

D:

Under aggregate-query calculation at Research for host-127: COUNT reports the three matching samples, not their CPU utilization values. It would test frequency rather than the requested load measure.

FCP - FortiSIEM 7.2 Analyst (FCP_FSM_AN-7.2) Practice Tests