Fortinet NSE5_FSW_AD-7.6 (Fortinet NSE 5 - FortiSwitch 7.6 Administrator) Practice Test 8

Question 70

A production incident in the lab reveals the need to constrain an identified flow that exceeds the permitted rate. Which targeted FortiSwitch setting or method should the team use?

  1. Classify IP traffic by DSCP
  2. Police a traffic class with an ACL policer
  3. Advertise an LLDP-MED voice network policy
  4. Trust marked endpoint traffic only on a designated port

Explanation

Correct Answer

B:

Given the described goal, a policer meters selected frames and can drop or mark traffic that violates its profile. The operator can test this claim by the specific check: read policer statistics and compare conforming versus exceeding packet counters.

Incorrect Answers

A:

For the lab, “Classify IP traffic by DSCP” is a different type of control from “Police a traffic class with an ACL policer”: DSCP in the IP header describes a forwarding class and can be mapped to switch QoS treatment. Unlike the requested feature, that setting addresses the need to preserve application classes across routed networks, not the objective to constrain an identified flow that exceeds the permitted rate.

C:

Compared with the requested “Police a traffic class with an ACL policer” at the lab, this would tell an IP phone which voice VLAN and traffic-priority policy to use instead: the switch sends a media-endpoint network policy through LLDP-MED; it does not perform client authentication. At the lab, the operational proof would instead be to read policer statistics and compare conforming versus exceeding packet counters, whereas “Advertise an LLDP-MED voice network policy” is validated by a different test: read the LLDP-MED network-policy TLV reported by the attached phone.

D:

Compared with the requested “Police a traffic class with an ACL policer” at the lab, this would avoid accepting arbitrary priority claims from untrusted user-facing ports instead: the chosen trust configuration affects classification of received markings; it does not authenticate the user. At the lab, the operational proof would instead be to read policer statistics and compare conforming versus exceeding packet counters, whereas “Trust marked endpoint traffic only on a designated port” is validated by a different test: examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted.

Question 71

During validation of a switch serving a high-density endpoint area at the staging rack, the team asks what the change “Police a traffic class with an ACL policer” actually does. Which outcome is correct?

  1. A policer meters selected frames and can drop or mark traffic that violates its profile
  2. LLDP advertises local device identity and port metadata to directly connected neighbors
  3. LLDP-MED capability TLVs identify supported endpoint functions independently of IP addressing
  4. The switch sends a media-endpoint network policy through LLDP-MED; it does not perform client authentication
  5. The configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN

Explanation

Correct Answer

A:

The switch behavior that matters is: the configured operation is meant to constrain an identified flow that exceeds the permitted rate. The most relevant validation is to read policer statistics and compare conforming versus exceeding packet counters for the equipment at the staging rack.

Incorrect Answers

B:

This outcome would be relevant to “Enable LLDP neighbor discovery” at the staging rack, not the task “Police a traffic class with an ACL policer”; the other task is to identify the directly attached switch or endpoint without relying on IP reachability. The action “Police a traffic class with an ACL policer” targets a different result: a policer meters selected frames and can drop or mark traffic that violates its profile; the proposed alternative would instead be checked by inspect the LLDP neighbor table for the expected chassis and port IDs.

C:

That behavior applies when engineers “Use LLDP-MED device capability advertisement”; the different operation “Police a traffic class with an ACL policer” is intended to constrain an identified flow that exceeds the permitted rate. That different feature is verified by query the LLDP-MED neighbor detail for capabilities and device class; for “Police a traffic class with an ACL policer” on a switch serving a high-density endpoint area, the relevant evidence is to read policer statistics and compare conforming versus exceeding packet counters.

D:

That behavior applies when engineers “Advertise an LLDP-MED voice network policy”; the different operation “Police a traffic class with an ACL policer” is intended to constrain an identified flow that exceeds the permitted rate. That different feature is verified by read the LLDP-MED network-policy TLV reported by the attached phone; for “Police a traffic class with an ACL policer” on a switch serving a high-density endpoint area, the relevant evidence is to read policer statistics and compare conforming versus exceeding packet counters.

E:

That behavior applies when engineers “Set an explicit voice VLAN on a phone-facing port”; the different operation “Police a traffic class with an ACL policer” is intended to constrain an identified flow that exceeds the permitted rate. That different feature is verified by check the phone's learned voice VLAN and the switch's VLAN membership for that port; for “Police a traffic class with an ACL policer” on a switch serving a high-density endpoint area, the relevant evidence is to read policer statistics and compare conforming versus exceeding packet counters.

Question 72

An auditor wants operational evidence for the switch action “Police a traffic class with an ACL policer” at the research building. Which check is relevant?

  1. Read policer statistics and compare conforming versus exceeding packet counters
  2. Inspect the location TLV being advertised and verify endpoint acceptance
  3. Compare ingress policy matches against traffic class and downstream queue assignment
  4. Inspect queue counters and the egress CoS queue policy during congestion

Explanation

Correct Answer

A:

At this network boundary, a policer meters selected frames and can drop or mark traffic that violates its profile. Directly measuring that result demonstrates whether the step to constrain an identified flow that exceeds the permitted rate succeeded on a managed switch running FortiSwitchOS 7.6.

Incorrect Answers

B:

The proposed check concerns “Set an LLDP-MED location policy” rather than “Police a traffic class with an ACL policer”: an LLDP-MED location TLV supplies location information; it does not route packets to emergency services. For “Police a traffic class with an ACL policer” on a managed switch running FortiSwitchOS 7.6, a better test would be to read policer statistics and compare conforming versus exceeding packet counters, which targets constrain an identified flow that exceeds the permitted rate rather than the alternative diagnostic “Set an LLDP-MED location policy”.

C:

This check is suited to “Configure ingress CoS classification” when trying to assign frames to a service class as they arrive at an access port, not to verify “Police a traffic class with an ACL policer” at the research building. Checking “Police a traffic class with an ACL policer” at the research building requires evidence of its own mechanism: a policer meters selected frames and can drop or mark traffic that violates its profile; that is not the outcome measured by “Configure ingress CoS classification”.

D:

This check is suited to “Map traffic classes to egress queues” when trying to apply differentiated forwarding when several flows contend for a busy uplink, not to verify “Police a traffic class with an ACL policer” at the research building. Checking “Police a traffic class with an ACL policer” at the research building requires evidence of its own mechanism: a policer meters selected frames and can drop or mark traffic that violates its profile; that is not the outcome measured by “Map traffic classes to egress queues”.

Question 73

The operational requirement for a remote FortiSwitch installation at the airport office is to avoid accepting arbitrary priority claims from untrusted user-facing ports. Which FortiSwitch choice directly targets it?

  1. Trust marked endpoint traffic only on a designated port
  2. Map traffic classes to egress queues
  3. Use LLDP-MED device capability advertisement
  4. Set an LLDP-MED location policy

Explanation

Correct Answer

A:

In this deployment, the chosen trust configuration affects classification of received markings; it does not authenticate the user. This distinction is material to the airport office, where the stated goal is to avoid accepting arbitrary priority claims from untrusted user-facing ports.

Incorrect Answers

B:

Compared with the requested “Trust marked endpoint traffic only on a designated port” at the airport office, this would apply differentiated forwarding when several flows contend for a busy uplink instead: a QoS queue policy controls scheduling priority or resource share at the output interface. At the airport office, the operational proof would instead be to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted, whereas “Map traffic classes to egress queues” is validated by a different test: inspect queue counters and the egress CoS queue policy during congestion.

C:

For the airport office, “Use LLDP-MED device capability advertisement” is a different type of control from “Trust marked endpoint traffic only on a designated port”: LLDP-MED capability TLVs identify supported endpoint functions independently of IP addressing. Unlike the requested feature, that setting addresses the need to allow a network administrator to determine whether a neighbor supports media-endpoint extensions, not the objective to avoid accepting arbitrary priority claims from untrusted user-facing ports.

D:

Compared with the requested “Trust marked endpoint traffic only on a designated port” at the airport office, this would provide location-identification metadata for supported media endpoints instead: an LLDP-MED location TLV supplies location information; it does not route packets to emergency services. At the airport office, the operational proof would instead be to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted, whereas “Set an LLDP-MED location policy” is validated by a different test: inspect the location TLV being advertised and verify endpoint acceptance.

Question 74

Before applying the planned operation “Trust marked endpoint traffic only on a designated port” at the operations center, the administrator must predict its impact. Which prediction is sound?

  1. Classification rules can map recognized 802.1p or DSCP values to internal priority treatment
  2. The 802.1Q priority field supplies a layer-2 class that can be mapped to switch egress queues
  3. The chosen trust configuration affects classification of received markings; it does not authenticate the user
  4. Remarking changes packet QoS bits for subsequent network devices rather than installing a route

Explanation

Correct Answer

C:

For the stated requirement, the configured operation is meant to avoid accepting arbitrary priority claims from untrusted user-facing ports. The most relevant validation is to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted for the equipment at the operations center.

Incorrect Answers

A:

That behavior applies when engineers “Configure ingress CoS classification”; the different operation “Trust marked endpoint traffic only on a designated port” is intended to avoid accepting arbitrary priority claims from untrusted user-facing ports. That different feature is verified by compare ingress policy matches against traffic class and downstream queue assignment; for “Trust marked endpoint traffic only on a designated port” on an endpoint-facing FortiSwitch port, the relevant evidence is to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted.

B:

This outcome would be relevant to “Classify frames using 802.1p PCP” at the operations center, not the task “Trust marked endpoint traffic only on a designated port”; the other task is to distinguish priority of traffic at Ethernet VLAN-tag level. The action “Trust marked endpoint traffic only on a designated port” targets a different result: the chosen trust configuration affects classification of received markings; it does not authenticate the user; the proposed alternative would instead be checked by inspect ingress PCP markings and the configured CoS-to-queue mapping for the affected ports.

D:

That behavior applies when engineers “Remark DSCP for a marked class”; the different operation “Trust marked endpoint traffic only on a designated port” is intended to avoid accepting arbitrary priority claims from untrusted user-facing ports. That different feature is verified by capture ingress and egress IP headers and compare their DSCP fields; for “Trust marked endpoint traffic only on a designated port” on an endpoint-facing FortiSwitch port, the relevant evidence is to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted.

Question 75

A technician says “Trust marked endpoint traffic only on a designated port” has solved the issue at the warehouse. Which diagnostic step would substantiate that claim?

  1. Capture ingress and egress IP headers and compare their DSCP fields
  2. Examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted
  3. Read policer statistics and compare conforming versus exceeding packet counters
  4. Read the LLDP-MED network-policy TLV reported by the attached phone
  5. Capture a marked IP packet and compare its DSCP with the switch QoS profile

Explanation

Correct Answer

B:

The deciding detail is that the chosen trust configuration affects classification of received markings; it does not authenticate the user. Directly measuring that result demonstrates whether the step to avoid accepting arbitrary priority claims from untrusted user-facing ports succeeded on a standalone FortiSwitch appliance.

Incorrect Answers

A:

The proposed check concerns “Remark DSCP for a marked class” rather than “Trust marked endpoint traffic only on a designated port”: remarking changes packet QoS bits for subsequent network devices rather than installing a route. For “Trust marked endpoint traffic only on a designated port” on a standalone FortiSwitch appliance, a better test would be to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted, which targets avoid accepting arbitrary priority claims from untrusted user-facing ports rather than the alternative diagnostic “Remark DSCP for a marked class”.

C:

The proposed check concerns “Police a traffic class with an ACL policer” rather than “Trust marked endpoint traffic only on a designated port”: a policer meters selected frames and can drop or mark traffic that violates its profile. For “Trust marked endpoint traffic only on a designated port” on a standalone FortiSwitch appliance, a better test would be to examine which port policy accepts the PCP or DSCP markings and whether the endpoint is trusted, which targets avoid accepting arbitrary priority claims from untrusted user-facing ports rather than the alternative diagnostic “Police a traffic class with an ACL policer”.

D:

This check is suited to “Advertise an LLDP-MED voice network policy” when trying to tell an IP phone which voice VLAN and traffic-priority policy to use, not to verify “Trust marked endpoint traffic only on a designated port” at the warehouse. Checking “Trust marked endpoint traffic only on a designated port” at the warehouse requires evidence of its own mechanism: the chosen trust configuration affects classification of received markings; it does not authenticate the user; that is not the outcome measured by “Advertise an LLDP-MED voice network policy”.

E:

This check is suited to “Classify IP traffic by DSCP” when trying to preserve application classes across routed networks, not to verify “Trust marked endpoint traffic only on a designated port” at the warehouse. Checking “Trust marked endpoint traffic only on a designated port” at the warehouse requires evidence of its own mechanism: the chosen trust configuration affects classification of received markings; it does not authenticate the user; that is not the outcome measured by “Classify IP traffic by DSCP”.

Question 76

During a change window in the headquarters, engineers are asked to separate voice traffic from ordinary data while an IP phone shares the link with a PC. What should they configure rather than using a feature for an adjacent purpose?

  1. Set an LLDP-MED location policy
  2. Map traffic classes to egress queues
  3. Use LLDP-MED device capability advertisement
  4. Set an explicit voice VLAN on a phone-facing port

Explanation

Correct Answer

D:

The relevant mechanism is: the configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN. The operator can test this claim by the specific check: check the phone's learned voice VLAN and the switch's VLAN membership for that port.

Incorrect Answers

A:

Compared with the requested “Set an explicit voice VLAN on a phone-facing port” at the headquarters, this would provide location-identification metadata for supported media endpoints instead: an LLDP-MED location TLV supplies location information; it does not route packets to emergency services. At the headquarters, the operational proof would instead be to check the phone's learned voice VLAN and the switch's VLAN membership for that port, whereas “Set an LLDP-MED location policy” is validated by a different test: inspect the location TLV being advertised and verify endpoint acceptance.

B:

Compared with the requested “Set an explicit voice VLAN on a phone-facing port” at the headquarters, this would apply differentiated forwarding when several flows contend for a busy uplink instead: a QoS queue policy controls scheduling priority or resource share at the output interface. At the headquarters, the operational proof would instead be to check the phone's learned voice VLAN and the switch's VLAN membership for that port, whereas “Map traffic classes to egress queues” is validated by a different test: inspect queue counters and the egress CoS queue policy during congestion.

C:

For the headquarters, “Use LLDP-MED device capability advertisement” is a different type of control from “Set an explicit voice VLAN on a phone-facing port”: LLDP-MED capability TLVs identify supported endpoint functions independently of IP addressing. Unlike the requested feature, that setting addresses the need to allow a network administrator to determine whether a neighbor supports media-endpoint extensions, not the objective to separate voice traffic from ordinary data while an IP phone shares the link with a PC.

Question 77

During validation of a local switch administering branch clients at the hospital wing, the team asks what the change “Set an explicit voice VLAN on a phone-facing port” actually does. Which outcome is correct?

  1. Classification rules can map recognized 802.1p or DSCP values to internal priority treatment
  2. The configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN
  3. The 802.1Q priority field supplies a layer-2 class that can be mapped to switch egress queues
  4. Remarking changes packet QoS bits for subsequent network devices rather than installing a route

Explanation

Correct Answer

B:

This approach fits because the configured operation is meant to separate voice traffic from ordinary data while an IP phone shares the link with a PC. The most relevant validation is to check the phone's learned voice VLAN and the switch's VLAN membership for that port for the equipment at the hospital wing.

Incorrect Answers

A:

That behavior applies when engineers “Configure ingress CoS classification”; the different operation “Set an explicit voice VLAN on a phone-facing port” is intended to separate voice traffic from ordinary data while an IP phone shares the link with a PC. That different feature is verified by compare ingress policy matches against traffic class and downstream queue assignment; for “Set an explicit voice VLAN on a phone-facing port” on a local switch administering branch clients, the relevant evidence is to check the phone's learned voice VLAN and the switch's VLAN membership for that port.

C:

This outcome would be relevant to “Classify frames using 802.1p PCP” at the hospital wing, not the task “Set an explicit voice VLAN on a phone-facing port”; the other task is to distinguish priority of traffic at Ethernet VLAN-tag level. The action “Set an explicit voice VLAN on a phone-facing port” targets a different result: the configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN; the proposed alternative would instead be checked by inspect ingress PCP markings and the configured CoS-to-queue mapping for the affected ports.

D:

That behavior applies when engineers “Remark DSCP for a marked class”; the different operation “Set an explicit voice VLAN on a phone-facing port” is intended to separate voice traffic from ordinary data while an IP phone shares the link with a PC. That different feature is verified by capture ingress and egress IP headers and compare their DSCP fields; for “Set an explicit voice VLAN on a phone-facing port” on a local switch administering branch clients, the relevant evidence is to check the phone's learned voice VLAN and the switch's VLAN membership for that port.

Question 78

At the training center, a dashboard shows ordinary link-up state, but the team also needs proof for “Set an explicit voice VLAN on a phone-facing port.” Which targeted check should be used?

  1. Read the LLDP-MED network-policy TLV reported by the attached phone
  2. Check the phone's learned voice VLAN and the switch's VLAN membership for that port
  3. Capture a marked IP packet and compare its DSCP with the switch QoS profile
  4. Read policer statistics and compare conforming versus exceeding packet counters
  5. Capture ingress and egress IP headers and compare their DSCP fields

Explanation

Correct Answer

B:

The critical distinction is that the configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN. Directly measuring that result demonstrates whether the step to separate voice traffic from ordinary data while an IP phone shares the link with a PC succeeded on a switch used by multiple office teams.

Incorrect Answers

A:

This check is suited to “Advertise an LLDP-MED voice network policy” when trying to tell an IP phone which voice VLAN and traffic-priority policy to use, not to verify “Set an explicit voice VLAN on a phone-facing port” at the training center. Checking “Set an explicit voice VLAN on a phone-facing port” at the training center requires evidence of its own mechanism: the configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN; that is not the outcome measured by “Advertise an LLDP-MED voice network policy”.

C:

This check is suited to “Classify IP traffic by DSCP” when trying to preserve application classes across routed networks, not to verify “Set an explicit voice VLAN on a phone-facing port” at the training center. Checking “Set an explicit voice VLAN on a phone-facing port” at the training center requires evidence of its own mechanism: the configured voice VLAN and advertised policy identify phone traffic, while data retains its intended VLAN; that is not the outcome measured by “Classify IP traffic by DSCP”.

D:

The proposed check concerns “Police a traffic class with an ACL policer” rather than “Set an explicit voice VLAN on a phone-facing port”: a policer meters selected frames and can drop or mark traffic that violates its profile. For “Set an explicit voice VLAN on a phone-facing port” on a switch used by multiple office teams, a better test would be to check the phone's learned voice VLAN and the switch's VLAN membership for that port, which targets separate voice traffic from ordinary data while an IP phone shares the link with a PC rather than the alternative diagnostic “Police a traffic class with an ACL policer”.

E:

The proposed check concerns “Remark DSCP for a marked class” rather than “Set an explicit voice VLAN on a phone-facing port”: remarking changes packet QoS bits for subsequent network devices rather than installing a route. For “Set an explicit voice VLAN on a phone-facing port” on a switch used by multiple office teams, a better test would be to check the phone's learned voice VLAN and the switch's VLAN membership for that port, which targets separate voice traffic from ordinary data while an IP phone shares the link with a PC rather than the alternative diagnostic “Remark DSCP for a marked class”.

Question 79

For the lab, the network team needs to allow a network administrator to determine whether a neighbor supports media-endpoint extensions. Which change is the most direct way to implement that requirement on a managed switch running FortiSwitchOS 7.6?

  1. Classify frames using 802.1p PCP
  2. Set an LLDP-MED location policy
  3. Configure ingress CoS classification
  4. Use LLDP-MED device capability advertisement

Explanation

Correct Answer

D:

That setting is appropriate here because LLDP-MED capability TLVs identify supported endpoint functions independently of IP addressing. This distinction is material to the lab, where the stated goal is to allow a network administrator to determine whether a neighbor supports media-endpoint extensions.

Incorrect Answers

A:

Compared with the requested “Use LLDP-MED device capability advertisement” at the lab, this would distinguish priority of traffic at Ethernet VLAN-tag level instead: the 802.1Q priority field supplies a layer-2 class that can be mapped to switch egress queues. At the lab, the operational proof would instead be to query the LLDP-MED neighbor detail for capabilities and device class, whereas “Classify frames using 802.1p PCP” is validated by a different test: inspect ingress PCP markings and the configured CoS-to-queue mapping for the affected ports.

B:

For the lab, “Set an LLDP-MED location policy” is a different type of control from “Use LLDP-MED device capability advertisement”: an LLDP-MED location TLV supplies location information; it does not route packets to emergency services. Unlike the requested feature, that setting addresses the need to provide location-identification metadata for supported media endpoints, not the objective to allow a network administrator to determine whether a neighbor supports media-endpoint extensions.

C:

Compared with the requested “Use LLDP-MED device capability advertisement” at the lab, this would assign frames to a service class as they arrive at an access port instead: classification rules can map recognized 802.1p or DSCP values to internal priority treatment. At the lab, the operational proof would instead be to query the LLDP-MED neighbor detail for capabilities and device class, whereas “Configure ingress CoS classification” is validated by a different test: compare ingress policy matches against traffic class and downstream queue assignment.

Question 80

Before applying the planned operation “Use LLDP-MED device capability advertisement” at the media studio, the administrator must predict its impact. Which prediction is sound?

  1. A policer meters selected frames and can drop or mark traffic that violates its profile
  2. LLDP-MED capability TLVs identify supported endpoint functions independently of IP addressing
  3. DSCP in the IP header describes a forwarding class and can be mapped to switch QoS treatment
  4. Remarking changes packet QoS bits for subsequent network devices rather than installing a route

Explanation

Correct Answer

B:

This is the precise control because the configured operation is meant to allow a network administrator to determine whether a neighbor supports media-endpoint extensions. The most relevant validation is to query the LLDP-MED neighbor detail for capabilities and device class for the equipment at the media studio.

Incorrect Answers

A:

That behavior applies when engineers “Police a traffic class with an ACL policer”; the different operation “Use LLDP-MED device capability advertisement” is intended to allow a network administrator to determine whether a neighbor supports media-endpoint extensions. That different feature is verified by read policer statistics and compare conforming versus exceeding packet counters; for “Use LLDP-MED device capability advertisement” on a remote FortiSwitch installation, the relevant evidence is to query the LLDP-MED neighbor detail for capabilities and device class.

C:

This outcome would be relevant to “Classify IP traffic by DSCP” at the media studio, not the task “Use LLDP-MED device capability advertisement”; the other task is to preserve application classes across routed networks. The action “Use LLDP-MED device capability advertisement” targets a different result: LLDP-MED capability TLVs identify supported endpoint functions independently of IP addressing; the proposed alternative would instead be checked by capture a marked IP packet and compare its DSCP with the switch QoS profile.

D:

That behavior applies when engineers “Remark DSCP for a marked class”; the different operation “Use LLDP-MED device capability advertisement” is intended to allow a network administrator to determine whether a neighbor supports media-endpoint extensions. That different feature is verified by capture ingress and egress IP headers and compare their DSCP fields; for “Use LLDP-MED device capability advertisement” on a remote FortiSwitch installation, the relevant evidence is to query the LLDP-MED neighbor detail for capabilities and device class.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests