Fortinet NSE5_SSE_AD-7.6 (Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator) Practice Test 39

Question 380

Within a remote workforce with strict data-handling rules and encrypted web traffic, the configuration has been applied. Which measurement or record best confirms the goal to deny one high-risk application within an otherwise permitted collaboration category?

  1. Inspected HTTPS sessions show content controls operating with a trusted inspection CA.
  2. DNS query logs show the configured domain-category or threat action.
  3. Test sessions use the supported inspectable transport and trigger inline control actions.
  4. The named application override applies the intended block despite the wider category allowance.
  5. Outgoing SaaS requests contain the configured tenant-restriction header under the inline policy.

Explanation

Correct Answer

D:

This checks ‘Use application category overrides’ at the correct operational boundary: Application Control overrides provide a more specific action than a broad application-category setting. It demonstrates the specific capability to deny one high-risk application within an otherwise permitted collaboration category in a remote workforce with strict data-handling rules and encrypted web traffic; deployment should additionally respect the constraint: Specific overrides should be tested against recognized application signatures.

Incorrect Answers

A:

That observation belongs to ‘Enable SSL deep inspection’, not ‘Use application category overrides’; its purpose is to inspect content carried inside HTTPS when allowed by policy and endpoint trust, the underlying behavior is that deep inspection decrypts eligible TLS sessions at the security service for content-aware scanning. The reviewer is instead verifying ‘Use application category overrides’ for a remote workforce with strict data-handling rules and encrypted web traffic, not the evidence produced by ‘Enable SSL deep inspection’.

B:

That observation belongs to ‘Use DNS filtering’, not ‘Use application category overrides’; its purpose is to stop requests to known malicious or restricted domains at the DNS layer, the underlying behavior is that DNS Filter evaluates domain lookup activity before a client establishes a normal destination session. The reviewer is instead verifying ‘Use application category overrides’ for a remote workforce with strict data-handling rules and encrypted web traffic, not the evidence produced by ‘Use DNS filtering’.

C:

That observation belongs to ‘Handle QUIC when deep inspection is required’, not ‘Use application category overrides’; its purpose is to keep SaaS web traffic on an inspectable TLS-over-TCP path for inline content controls, the underlying behavior is that blocking QUIC can force compatible browsers to fall back from HTTP/3 to TLS connections inspectable by the configured SASE controls. The reviewer is instead verifying ‘Use application category overrides’ for a remote workforce with strict data-handling rules and encrypted web traffic, not the evidence produced by ‘Handle QUIC when deep inspection is required’.

E:

That observation belongs to ‘Use inline CASB HTTP header restrictions’, not ‘Use application category overrides’; its purpose is to restrict which SaaS tenant a managed user may access by adjusting inspected web request headers, the underlying behavior is that Web Filter with Inline-CASB can insert or alter supported outbound HTTP headers to enforce SaaS tenant restrictions. The reviewer is instead verifying ‘Use application category overrides’ for a remote workforce with strict data-handling rules and encrypted web traffic, not the evidence produced by ‘Use inline CASB HTTP header restrictions’.

Question 381

Within a security operations review of remote-user threat detections, the administrator must distinguish failed identity sign-in from a denied security profile decision without redesigning unrelated services. Which option addresses the goal?

  1. Correlate endpoint posture and access events
  2. Inspect antivirus detection events
  3. Correlate cloud authentication events
  4. Inspect DNS-filter threat events
  5. Inspect IPS threat logs

Explanation

Correct Answer

C:

Authentication events reveal the login or SSO step at which a FortiSASE user failed to establish identity; that scope directly serves the goal to distinguish failed identity sign-in from a denied security profile decision in a security operations review of remote-user threat detections. During implementation, a successful SAML assertion still does not grant every network destination rather than treating the configuration label as proof of working service.

Incorrect Answers

A:

Endpoint and access records can show that a posture tag triggered a conditional denial, a mechanism intended to identify an endpoint denied for noncompliance rather than for missing network reachability rather than the requested ‘Correlate cloud authentication events’ control. The stated task instead is to distinguish failed identity sign-in from a denied security profile decision, and adjusting ‘Correlate endpoint posture and access events’ would not deliver ‘Correlate cloud authentication events’. For the ‘Correlate endpoint posture and access events’ alternative to ‘Correlate cloud authentication events’, correlate user, device, policy and time before treating the rejection as a routing fault.

B:

AV logs identify signature or file detections and the security action applied to a session, a mechanism intended to identify which inspected download was blocked for malware and under which policy rather than the requested ‘Correlate cloud authentication events’ control. The stated task instead is to distinguish failed identity sign-in from a denied security profile decision, and adjusting ‘Inspect antivirus detection events’ would not deliver ‘Correlate cloud authentication events’. For the ‘Inspect antivirus detection events’ alternative to ‘Correlate cloud authentication events’, a traffic deny log by itself does not establish that antivirus detected malware.

D:

DNS security logs record affected domain requests and configured malicious-domain actions, a mechanism intended to identify blocked malicious name resolution before the browser opens a TCP session rather than the requested ‘Correlate cloud authentication events’ control. The stated task instead is to distinguish failed identity sign-in from a denied security profile decision, and adjusting ‘Inspect DNS-filter threat events’ would not deliver ‘Correlate cloud authentication events’. For the ‘Inspect DNS-filter threat events’ alternative to ‘Correlate cloud authentication events’, DNS filtering operates at name resolution, not by scanning file payloads.

E:

IPS events contain the signature context and configured security response for detected traffic, a mechanism intended to verify whether an exploit signature triggered inspection rather than a generic connectivity failure rather than the requested ‘Correlate cloud authentication events’ control. The stated task instead is to distinguish failed identity sign-in from a denied security profile decision, and adjusting ‘Inspect IPS threat logs’ would not deliver ‘Correlate cloud authentication events’. For the ‘Inspect IPS threat logs’ alternative to ‘Correlate cloud authentication events’, a reset alone is not sufficient evidence to attribute the decision to IPS.

Question 382

At a dual-carrier site separating internet transport from data-center overlays, a support engineer needs to verify that ‘Set member fallback priority’ is active for the goal to prefer a designated route candidate when priority is the deciding factor. Which observation is decisive?

  1. The member status shows the intended lower numerical priority on the preferred circuit.
  2. Member status shows the maintenance circuit disabled and other members eligible.
  3. The correct VLAN subinterface appears as an SD-WAN member.
  4. The member now appears in the target zone and corresponding policies use it.

Explanation

Correct Answer

A:

This checks ‘Set member fallback priority’ at the correct operational boundary: a lower member priority value takes precedence when the routing or SD-WAN selection uses priority. It demonstrates the specific capability to prefer a designated route candidate when priority is the deciding factor in a dual-carrier site separating internet transport from data-center overlays; deployment should additionally respect the constraint: Priority is not a substitute for configuring measured quality criteria.

Incorrect Answers

B:

That observation belongs to ‘Disable a maintenance member’, not ‘Set member fallback priority’; its purpose is to exclude a WAN circuit from SD-WAN decisions during scheduled carrier work, the underlying behavior is that disabling an SD-WAN member removes it from eligible SD-WAN selection without requiring deletion of its configuration. The reviewer is instead verifying ‘Set member fallback priority’ for a dual-carrier site separating internet transport from data-center overlays, not the evidence produced by ‘Disable a maintenance member’.

C:

That observation belongs to ‘Use a VLAN interface as a member’, not ‘Set member fallback priority’; its purpose is to steer traffic over a tagged Ethernet handoff from an ISP, the underlying behavior is that an SD-WAN member may reference a VLAN interface rather than only an untagged physical port. The reviewer is instead verifying ‘Set member fallback priority’ for a dual-carrier site separating internet transport from data-center overlays, not the evidence produced by ‘Use a VLAN interface as a member’.

D:

That observation belongs to ‘Move a member between zones’, not ‘Set member fallback priority’; its purpose is to change how one interface is referenced by routes and policies without rebuilding the WAN port, the underlying behavior is that reassigning the member to a different zone changes its logical policy and rule membership. The reviewer is instead verifying ‘Set member fallback priority’ for a dual-carrier site separating internet transport from data-center overlays, not the evidence produced by ‘Move a member between zones’.

Question 383

For a contractor access program with different endpoint and connection policies, a maintenance plan requires the firewall team to treat disabled or missing antimalware protection as a noncompliant device condition. Which choice is appropriate?

  1. Use a certificate-based posture check
  2. Require endpoint antivirus status
  3. Use endpoint-profile assignment for managed groups
  4. Review the posture tag's allow or deny direction

Explanation

Correct Answer

B:

A posture rule can evaluate security-product presence or protection state and classify the endpoint; that scope directly serves the goal to treat disabled or missing antimalware protection as a noncompliant device condition in a contractor access program with different endpoint and connection policies. During implementation, product detection must match the supported platform and endpoint security configuration rather than treating the configuration label as proof of working service.

Incorrect Answers

A:

Endpoint tagging can evaluate the presence and properties of a required client certificate, a mechanism intended to identify managed endpoints that carry an enterprise-issued device credential rather than the requested ‘Require endpoint antivirus status’ control. The stated task instead is to treat disabled or missing antimalware protection as a noncompliant device condition, and adjusting ‘Use a certificate-based posture check’ would not deliver ‘Require endpoint antivirus status’. For the ‘Use a certificate-based posture check’ alternative to ‘Require endpoint antivirus status’, certificate lifecycle and private-key protection matter separately from user authentication.

C:

Endpoint profile assignment determines which device-side checks and tunnel behavior a managed group receives, a mechanism intended to apply a stricter posture and connection configuration to a high-risk user population rather than the requested ‘Require endpoint antivirus status’ control. The stated task instead is to treat disabled or missing antimalware protection as a noncompliant device condition, and adjusting ‘Use endpoint-profile assignment for managed groups’ would not deliver ‘Require endpoint antivirus status’. For the ‘Use endpoint-profile assignment for managed groups’ alternative to ‘Require endpoint antivirus status’, a cloud traffic policy alone does not deploy settings to FortiClient endpoints.

D:

An allow-when-tagged versus deny-when-tagged action determines whether the matched posture condition grants connectivity, a mechanism intended to avoid inverting the policy when a tag specifically denotes a noncompliant endpoint rather than the requested ‘Require endpoint antivirus status’ control. The stated task instead is to treat disabled or missing antimalware protection as a noncompliant device condition, and adjusting ‘Review the posture tag's allow or deny direction’ would not deliver ‘Require endpoint antivirus status’. For the ‘Review the posture tag's allow or deny direction’ alternative to ‘Require endpoint antivirus status’, define whether a tag means compliant or noncompliant before using it for admission.

Question 384

Within a security team classifying devices by their current local protection state, the operator applies the control ‘Check a required running process’ as part of an effort to permit an internal app only when its approved endpoint security agent is running. Which operating behavior should the team expect?

  1. Process-presence conditions can contribute to device posture evaluation where supported.
  2. Private access policies can use security posture tags as dynamic matching criteria.
  3. Posture-based enforcement depends on updated FortiClient registration and local security-condition evaluation.
  4. OS-version posture criteria allow security rules to distinguish compliant from obsolete endpoint builds.
  5. Endpoint profile assignment determines which device-side checks and tunnel behavior a managed group receives.

Explanation

Correct Answer

A:

‘Check a required running process’ is used to permit an internal app only when its approved endpoint security agent is running in a security team classifying devices by their current local protection state; this is its actual operating effect, rather than an unrelated feature from the other choices. A useful confirmation would find that the posture rule changes endpoint classification when the process stops or resumes; the rollout must also respect this constraint: A process name alone is weaker than cryptographic proof of application integrity.

Incorrect Answers

B:

The described behavior is part of ‘Assign compliant endpoint tags to private policies’, used to grant sensitive private access only to managed devices meeting specified security conditions instead of the role of ‘Check a required running process’. In contrast to ‘Assign compliant endpoint tags to private policies’, ‘Check a required running process’ follows a different mechanism: process-presence conditions can contribute to device posture evaluation where supported. Treating ‘Assign compliant endpoint tags to private policies’ as equivalent would not address users stop a mandatory protection process yet retain the previous trust classification in a security team classifying devices by their current local protection state.

C:

The described behavior is part of ‘Validate fresh endpoint posture telemetry’, used to avoid relying on stale compliance information after an endpoint stops reporting to management instead of the role of ‘Check a required running process’. In contrast to ‘Validate fresh endpoint posture telemetry’, ‘Check a required running process’ follows a different mechanism: process-presence conditions can contribute to device posture evaluation where supported. Treating ‘Validate fresh endpoint posture telemetry’ as equivalent would not address users stop a mandatory protection process yet retain the previous trust classification in a security team classifying devices by their current local protection state.

D:

The described behavior is part of ‘Use operating-system version posture’, used to restrict access from endpoints that do not meet an approved operating-system baseline instead of the role of ‘Check a required running process’. In contrast to ‘Use operating-system version posture’, ‘Check a required running process’ follows a different mechanism: process-presence conditions can contribute to device posture evaluation where supported. Treating ‘Use operating-system version posture’ as equivalent would not address users stop a mandatory protection process yet retain the previous trust classification in a security team classifying devices by their current local protection state.

E:

The described behavior is part of ‘Use endpoint-profile assignment for managed groups’, used to apply a stricter posture and connection configuration to a high-risk user population instead of the role of ‘Check a required running process’. In contrast to ‘Use endpoint-profile assignment for managed groups’, ‘Check a required running process’ follows a different mechanism: process-presence conditions can contribute to device posture evaluation where supported. Treating ‘Use endpoint-profile assignment for managed groups’ as equivalent would not address users stop a mandatory protection process yet retain the previous trust classification in a security team classifying devices by their current local protection state.

Question 385

During an authorized lab exercise for an administrator analyzing cloud application consumption by user group, a reviewer needs proof the deployment can identify repeated attempts to reach restricted destinations across remote users. Which observation most directly validates it?

  1. Before-and-after summaries show the relevant security category event counts.
  2. The report's start and end filters match the investigated incident interval.
  3. The time-filtered report ranks user or group traffic volume for the affected interval.
  4. The report associates blocked sessions with the affected destinations and user identities.

Explanation

Correct Answer

D:

This checks ‘Correlate policy action with destination risk’ at the correct operational boundary: security analytics can group blocked traffic by destination or policy to reveal recurring patterns. It demonstrates the specific capability to identify repeated attempts to reach restricted destinations across remote users in an administrator analyzing cloud application consumption by user group; deployment should additionally respect the constraint: An event count requires context to distinguish mistakes from an actual threat campaign.

Incorrect Answers

A:

That observation belongs to ‘Trend security events by category’, not ‘Correlate policy action with destination risk’; its purpose is to measure whether a newly deployed protection reduced observed prohibited activity, the underlying behavior is that security reporting aggregates action and threat categories so changes can be compared across time. The reviewer is instead verifying ‘Correlate policy action with destination risk’ for an administrator analyzing cloud application consumption by user group, not the evidence produced by ‘Trend security events by category’.

B:

That observation belongs to ‘Use report time filters for incident scoping’, not ‘Correlate policy action with destination risk’; its purpose is to limit an investigation to the period in which an employee reported a cloud access failure, the underlying behavior is that time-bound analytics separate incident-period activity from unrelated historical traffic. The reviewer is instead verifying ‘Correlate policy action with destination risk’ for an administrator analyzing cloud application consumption by user group, not the evidence produced by ‘Use report time filters for incident scoping’.

C:

That observation belongs to ‘Compare user traffic volume trends’, not ‘Correlate policy action with destination risk’; its purpose is to find which authenticated population caused a sustained increase in cloud egress, the underlying behavior is that user traffic analytics aggregate bytes and sessions by identity and time for usage investigation. The reviewer is instead verifying ‘Correlate policy action with destination risk’ for an administrator analyzing cloud application consumption by user group, not the evidence produced by ‘Compare user traffic volume trends’.

Question 386

For a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs, a review of the current state finds that the VPN tunnel passes traffic manually but is absent from overlay service member lists. Which configuration area most directly addresses this?

  1. Investigate: Use an IPsec interface as a member
  2. Investigate: Use a VLAN interface as a member
  3. Investigate: Use an isolated single-member zone
  4. Investigate: Use a physical interface as a member

Explanation

Correct Answer

A:

The symptom identifies the missing operational behavior: route-based IPsec tunnel interfaces can be members whose quality is measured and selected for overlay routing. For a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs, a direct diagnostic confirmation would be that the tunnel interface is listed as an SD-WAN overlay member; during repair, bring up the route-based tunnel and verify selectors and reachability independently.

Incorrect Answers

B:

An SD-WAN member may reference a VLAN interface rather than only an untagged physical port, which serves the different requirement to steer traffic over a tagged Ethernet handoff from an ISP instead of the behavior delivered by ‘Use an IPsec interface as a member’. If that component were misconfigured, a more characteristic finding would be that the provider's tagged circuit is up at layer two but no logical tagged WAN is selectable; the actual report concerns the VPN tunnel passes traffic manually but is absent from overlay service member lists at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs.

C:

A zone can contain one member, allowing special security or routing treatment for that interface, which serves the different requirement to apply a dedicated policy to one exceptional transport while keeping other members grouped instead of the behavior delivered by ‘Use an IPsec interface as a member’. If that component were misconfigured, a more characteristic finding would be that a regulated circuit receives the same outbound policy as every generic ISP member; the actual report concerns the VPN tunnel passes traffic manually but is absent from overlay service member lists at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs.

D:

Physical WAN ports can act as members with their own connectivity, next hops, costs, and measured health, which serves the different requirement to bring a directly connected broadband circuit under SD-WAN decisions instead of the behavior delivered by ‘Use an IPsec interface as a member’. If that component were misconfigured, a more characteristic finding would be that the carrier port exists but no SD-WAN service can select it; the actual report concerns the VPN tunnel passes traffic manually but is absent from overlay service member lists at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs.

Question 387

Within a dual-carrier site separating internet transport from data-center overlays, after the rollout, operators find that a regulated circuit receives the same outbound policy as every generic ISP member. Where should they focus troubleshooting?

  1. Investigate: Disable a maintenance member
  2. Investigate: Assign members to the intended zone
  3. Investigate: Use a FortiExtender interface member
  4. Investigate: Use an isolated single-member zone
  5. Investigate: Use a physical interface as a member

Explanation

Correct Answer

D:

The symptom identifies the missing operational behavior: a zone can contain one member, allowing special security or routing treatment for that interface. For a dual-carrier site separating internet transport from data-center overlays, a direct diagnostic confirmation would be that the exception WAN is in a dedicated zone referenced by its special policy; during repair, a one-member zone is still referenced as a zone, not as an individual member in firewall policies.

Incorrect Answers

A:

Disabling an SD-WAN member removes it from eligible SD-WAN selection without requiring deletion of its configuration, which serves the different requirement to exclude a WAN circuit from SD-WAN decisions during scheduled carrier work instead of the behavior delivered by ‘Use an isolated single-member zone’. If that component were misconfigured, a more characteristic finding would be that the drained circuit is still chosen for new flows during maintenance; the actual report concerns a regulated circuit receives the same outbound policy as every generic ISP member at a dual-carrier site separating internet transport from data-center overlays.

B:

A member's zone association determines which zone-based routes and policies can use that interface, which serves the different requirement to put two ISP circuits in the internet transport zone rather than the private-overlay group instead of the behavior delivered by ‘Use an isolated single-member zone’. If that component were misconfigured, a more characteristic finding would be that wan2 is operational but traffic for the transport zone cannot select it; the actual report concerns a regulated circuit receives the same outbound policy as every generic ISP member at a dual-carrier site separating internet transport from data-center overlays.

C:

A FortiExtender-provided network interface can participate as an SD-WAN member alongside wired transports, which serves the different requirement to include a cellular backup path in SD-WAN selection instead of the behavior delivered by ‘Use an isolated single-member zone’. If that component were misconfigured, a more characteristic finding would be that the LTE backup shows connectivity in its device view but is never considered for SD-WAN; the actual report concerns a regulated circuit receives the same outbound policy as every generic ISP member at a dual-carrier site separating internet transport from data-center overlays.

E:

Physical WAN ports can act as members with their own connectivity, next hops, costs, and measured health, which serves the different requirement to bring a directly connected broadband circuit under SD-WAN decisions instead of the behavior delivered by ‘Use an isolated single-member zone’. If that component were misconfigured, a more characteristic finding would be that the carrier port exists but no SD-WAN service can select it; the actual report concerns a regulated circuit receives the same outbound policy as every generic ISP member at a dual-carrier site separating internet transport from data-center overlays.

Question 388

During an authorized lab exercise for an operations hub with differentiated perimeter policies for WAN members, a reviewer needs proof the deployment can send probes using the correct reachable source address on a multiaddress uplink. Which observation most directly validates it?

  1. Member status shows the maintenance circuit disabled and other members eligible.
  2. Health-check packets use the specified reachable source on the chosen member.
  3. The FortiExtender interface appears in the member inventory with usable state.
  4. The tunnel interface is listed as an SD-WAN overlay member.

Explanation

Correct Answer

B:

This checks ‘Define the member health-check source’ at the correct operational boundary: a member health-check source setting controls the source IP used by health probes to a monitored server. It demonstrates the specific capability to send probes using the correct reachable source address on a multiaddress uplink in an operations hub with differentiated perimeter policies for WAN members; deployment should additionally respect the constraint: The source must be routable toward the monitor target and accepted by its response path.

Incorrect Answers

A:

That observation belongs to ‘Disable a maintenance member’, not ‘Define the member health-check source’; its purpose is to exclude a WAN circuit from SD-WAN decisions during scheduled carrier work, the underlying behavior is that disabling an SD-WAN member removes it from eligible SD-WAN selection without requiring deletion of its configuration. The reviewer is instead verifying ‘Define the member health-check source’ for an operations hub with differentiated perimeter policies for WAN members, not the evidence produced by ‘Disable a maintenance member’.

C:

That observation belongs to ‘Use a FortiExtender interface member’, not ‘Define the member health-check source’; its purpose is to include a cellular backup path in SD-WAN selection, the underlying behavior is that a FortiExtender-provided network interface can participate as an SD-WAN member alongside wired transports. The reviewer is instead verifying ‘Define the member health-check source’ for an operations hub with differentiated perimeter policies for WAN members, not the evidence produced by ‘Use a FortiExtender interface member’.

D:

That observation belongs to ‘Use an IPsec interface as a member’, not ‘Define the member health-check source’; its purpose is to apply SD-WAN selection to redundant encrypted site-to-site paths, the underlying behavior is that route-based IPsec tunnel interfaces can be members whose quality is measured and selected for overlay routing. The reviewer is instead verifying ‘Define the member health-check source’ for an operations hub with differentiated perimeter policies for WAN members, not the evidence produced by ‘Use an IPsec interface as a member’.

Question 389

During an authorized lab exercise for a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs, the acceptance criteria require the team to apply SD-WAN selection to redundant encrypted site-to-site paths. Which control meets that requirement?

  1. Use an isolated single-member zone
  2. Use a physical interface as a member
  3. Use an IPsec interface as a member
  4. Set member cost

Explanation

Correct Answer

C:

Route-based IPsec tunnel interfaces can be members whose quality is measured and selected for overlay routing; that scope directly serves the goal to apply SD-WAN selection to redundant encrypted site-to-site paths in a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs. During implementation, bring up the route-based tunnel and verify selectors and reachability independently rather than treating the configuration label as proof of working service.

Incorrect Answers

A:

A zone can contain one member, allowing special security or routing treatment for that interface, a mechanism intended to apply a dedicated policy to one exceptional transport while keeping other members grouped rather than the requested ‘Use an IPsec interface as a member’ control. The stated task instead is to apply SD-WAN selection to redundant encrypted site-to-site paths, and adjusting ‘Use an isolated single-member zone’ would not deliver ‘Use an IPsec interface as a member’. For the ‘Use an isolated single-member zone’ alternative to ‘Use an IPsec interface as a member’, a one-member zone is still referenced as a zone, not as an individual member in firewall policies.

B:

Physical WAN ports can act as members with their own connectivity, next hops, costs, and measured health, a mechanism intended to bring a directly connected broadband circuit under SD-WAN decisions rather than the requested ‘Use an IPsec interface as a member’ control. The stated task instead is to apply SD-WAN selection to redundant encrypted site-to-site paths, and adjusting ‘Use a physical interface as a member’ would not deliver ‘Use an IPsec interface as a member’. For the ‘Use a physical interface as a member’ alternative to ‘Use an IPsec interface as a member’, adding a member does not replace interface addressing or carrier troubleshooting.

D:

The cost field ranks SLA-qualified members for the Lowest Cost strategy, with smaller values preferred, a mechanism intended to favor a lower-priced uplink only when eligible under lowest-cost SLA rules rather than the requested ‘Use an IPsec interface as a member’ control. The stated task instead is to apply SD-WAN selection to redundant encrypted site-to-site paths, and adjusting ‘Set member cost’ would not deliver ‘Use an IPsec interface as a member’. For the ‘Set member cost’ alternative to ‘Use an IPsec interface as a member’, cost does not replace health measurements or firewall policy matching.

Question 390

At an industrial branch sending payroll traffic to a data-center application, a support engineer needs to verify that ‘Keep underlay route for tunnel peer’ is active for the goal to preserve transport reachability to an IPsec hub before private overlay traffic is steered. Which observation is decisive?

  1. A route lookup shows the expected egress interface and reachable next hop.
  2. The route view includes the intended equal-cost candidates for that prefix.
  3. The hub's public endpoint resolves through a valid ISP underlay route.
  4. The routing table has a valid longer-prefix route to the partner CIDR.

Explanation

Correct Answer

C:

This checks ‘Keep underlay route for tunnel peer’ at the correct operational boundary: an overlay tunnel requires the public peer endpoint to remain reachable through an underlay path. It demonstrates the specific capability to preserve transport reachability to an IPsec hub before private overlay traffic is steered in an industrial branch sending payroll traffic to a data-center application; deployment should additionally respect the constraint: Protect tunnel-control reachability from routing recursion into the same tunnel.

Incorrect Answers

A:

That observation belongs to ‘Verify the forwarding information base’, not ‘Keep underlay route for tunnel peer’; its purpose is to confirm the FortiGate has installed a usable next hop for a destination, the underlying behavior is that the FIB holds selected forwarding entries and is essential to actual packet delivery. The reviewer is instead verifying ‘Keep underlay route for tunnel peer’ for an industrial branch sending payroll traffic to a data-center application, not the evidence produced by ‘Verify the forwarding information base’.

B:

That observation belongs to ‘Use ECMP-compatible route candidates’, not ‘Keep underlay route for tunnel peer’; its purpose is to make multiple eligible equal-cost paths available for subsequent SD-WAN decisions, the underlying behavior is that equal Cost Multi-Path allows compatible routes to coexist as candidates when distance and priority permit. The reviewer is instead verifying ‘Keep underlay route for tunnel peer’ for an industrial branch sending payroll traffic to a data-center application, not the evidence produced by ‘Use ECMP-compatible route candidates’.

D:

That observation belongs to ‘Prefer a more specific prefix’, not ‘Keep underlay route for tunnel peer’; its purpose is to send a partner network into a private tunnel even while default internet routing is present, the underlying behavior is that longest-prefix match chooses a more specific valid destination route ahead of a broader default. The reviewer is instead verifying ‘Keep underlay route for tunnel peer’ for an industrial branch sending payroll traffic to a data-center application, not the evidence produced by ‘Prefer a more specific prefix’.

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests