Fortinet NSE5_SSE_AD-7.6 (Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator) Practice Test 73

Question 720

In a change-control meeting for a remote call center measuring two ISP paths to the same application target, a colleague challenges the proposed control ‘Check probe-path asymmetry’ for the requirement to confirm health responses return correctly when transport routes are asymmetric. Which explanation accurately describes its behavior?

  1. Health checks against a representative reachable target include more of the application path than checks aimed only at the immediate gateway.
  2. Separate health checks can reveal that a circuit reaches one remote service well but another poorly.
  3. Health tests depend on packets reaching the target and return traffic finding a valid response path.
  4. Targets tighter than achievable WAN conditions can cause otherwise connected members to fail policy qualification.

Explanation

Correct Answer

C:

‘Check probe-path asymmetry’ is used to confirm health responses return correctly when transport routes are asymmetric in a remote call center measuring two ISP paths to the same application target; this is its actual operating effect, rather than an unrelated feature from the other choices. A useful confirmation would find that packet capture shows probe requests and missing return responses on the affected member; the rollout must also respect this constraint: A failed probe does not by itself prove the physical carrier link is down.

Incorrect Answers

A:

The described behavior is part of ‘Select the correct probe server’, used to measure user-relevant path health rather than only the nearest ISP hop instead of the role of ‘Check probe-path asymmetry’. In contrast to ‘Select the correct probe server’, ‘Check probe-path asymmetry’ follows a different mechanism: health tests depend on packets reaching the target and return traffic finding a valid response path. Treating ‘Select the correct probe server’ as equivalent would not address the monitored target responds to other locations but one member records full probe loss in a remote call center measuring two ISP paths to the same application target.

B:

The described behavior is part of ‘Compare health across multiple SLAs’, used to measure distinct service destinations separately rather than treating the internet as one uniform path instead of the role of ‘Check probe-path asymmetry’. In contrast to ‘Compare health across multiple SLAs’, ‘Check probe-path asymmetry’ follows a different mechanism: health tests depend on packets reaching the target and return traffic finding a valid response path. Treating ‘Compare health across multiple SLAs’ as equivalent would not address the monitored target responds to other locations but one member records full probe loss in a remote call center measuring two ISP paths to the same application target.

D:

The described behavior is part of ‘Avoid overly strict SLA targets’, used to prevent both usable circuits from being excluded by unrealistic quality limits instead of the role of ‘Check probe-path asymmetry’. In contrast to ‘Avoid overly strict SLA targets’, ‘Check probe-path asymmetry’ follows a different mechanism: health tests depend on packets reaching the target and return traffic finding a valid response path. Treating ‘Avoid overly strict SLA targets’ as equivalent would not address the monitored target responds to other locations but one member records full probe loss in a remote call center measuring two ISP paths to the same application target.

Question 721

At an industrial branch sending payroll traffic to a data-center application, the team will implement ‘Review administrative distance’ to choose between competing routes learned from different sources for the same prefix. Select THREE statements that accurately describe this control's mechanism, deployment consideration, and validating evidence. Choose THREE.

  1. The FIB holds selected forwarding entries and is essential to actual packet delivery.
  2. Forward-route success is insufficient for stateful end-to-end communication.
  3. The routing table has a valid longer-prefix route to the partner CIDR.
  4. Administrative distance influences which equal-prefix route source is preferred for installation.
  5. The expected route has the winning administrative distance for its destination.
  6. Specificity is considered before comparing administrative distance on different prefix lengths.

Explanation

Correct Answers

D:

This is the mechanism behind ‘Review administrative distance’ in an industrial branch sending payroll traffic to a data-center application; its objective is to choose between competing routes learned from different sources for the same prefix. The deployment can be confirmed when the expected route has the winning administrative distance for its destination, subject to the boundary that specificity is considered before comparing administrative distance on different prefix lengths.

E:

The observation follows from the operation of ‘Review administrative distance’: administrative distance influences which equal-prefix route source is preferred for installation. It directly tests the requested ability to choose between competing routes learned from different sources for the same prefix in an industrial branch sending payroll traffic to a data-center application, rather than another policy or network layer.

F:

This safeguard applies to ‘Review administrative distance’, which works because administrative distance influences which equal-prefix route source is preferred for installation. Without the correct deployment condition, operators may see that a backup static route remains installed ahead of an intended learned route due to distance in an industrial branch sending payroll traffic to a data-center application.

Incorrect Answers

A:

This describes ‘Verify the forwarding information base’, not the requested ‘Review administrative distance’, and is meant to confirm the FortiGate has installed a usable next hop for a destination. Its evidence would be that a route lookup shows the expected egress interface and reachable next hop, not a demonstration of ‘Review administrative distance’ and its distinct outcome.

B:

The planning point is associated with ‘Confirm return route for remote private access’, not ‘Review administrative distance’; its real role is to repair one-way traffic where forward packets reach the data center but replies do not. The required deployment instead centers on ‘Review administrative distance’, rather than ‘Confirm return route for remote private access’; the distinct symptom to guard against is that a backup static route remains installed ahead of an intended learned route due to distance.

C:

This result would validate ‘Prefer a more specific prefix’, not ‘Review administrative distance’, because longest-prefix match chooses a more specific valid destination route ahead of a broader default. That separate implementation serves send a partner network into a private tunnel even while default internet routing is present, whereas the audit needs evidence specifically of ‘Review administrative distance’ at an industrial branch sending payroll traffic to a data-center application.

Question 722

For a remote access monthly review for the SASE operations team, an audit asks for evidence that the team can find which authenticated population caused a sustained increase in cloud egress. Which finding would answer that question?

  1. The report breaks down application categories and their traffic share for the period.
  2. The report's start and end filters match the investigated incident interval.
  3. The time-filtered report ranks user or group traffic volume for the affected interval.
  4. The report associates blocked sessions with the affected destinations and user identities.

Explanation

Correct Answer

C:

This checks ‘Compare user traffic volume trends’ at the correct operational boundary: user traffic analytics aggregate bytes and sessions by identity and time for usage investigation. It demonstrates the specific capability to find which authenticated population caused a sustained increase in cloud egress in a remote access monthly review for the SASE operations team; deployment should additionally respect the constraint: Traffic volume alone is not evidence that a session is malicious.

Incorrect Answers

A:

That observation belongs to ‘Review application usage reports’, not ‘Compare user traffic volume trends’; its purpose is to identify which SaaS or application class dominates inspected remote traffic, the underlying behavior is that application analytics classify observed traffic into recognizable applications for reporting. The reviewer is instead verifying ‘Compare user traffic volume trends’ for a remote access monthly review for the SASE operations team, not the evidence produced by ‘Review application usage reports’.

B:

That observation belongs to ‘Use report time filters for incident scoping’, not ‘Compare user traffic volume trends’; its purpose is to limit an investigation to the period in which an employee reported a cloud access failure, the underlying behavior is that time-bound analytics separate incident-period activity from unrelated historical traffic. The reviewer is instead verifying ‘Compare user traffic volume trends’ for a remote access monthly review for the SASE operations team, not the evidence produced by ‘Use report time filters for incident scoping’.

D:

That observation belongs to ‘Correlate policy action with destination risk’, not ‘Compare user traffic volume trends’; its purpose is to identify repeated attempts to reach restricted destinations across remote users, the underlying behavior is that security analytics can group blocked traffic by destination or policy to reveal recurring patterns. The reviewer is instead verifying ‘Compare user traffic volume trends’ for a remote access monthly review for the SASE operations team, not the evidence produced by ‘Correlate policy action with destination risk’.

Question 723

During an authorized lab exercise for a private-access application that requires device trust as well as user identity, the deployment standard specifies the control ‘Review the posture tag's allow or deny direction’ to avoid inverting the policy when a tag specifically denotes a noncompliant endpoint. Which functional description matches it?

  1. A configured pre-connection check can allow or deny a tunnel attempt based on an assigned posture tag.
  2. Endpoint tagging can evaluate the presence and properties of a required client certificate.
  3. FortiClient evaluates defined endpoint posture conditions and associates matching endpoints with security tags.
  4. An allow-when-tagged versus deny-when-tagged action determines whether the matched posture condition grants connectivity.

Explanation

Correct Answer

D:

‘Review the posture tag's allow or deny direction’ is used to avoid inverting the policy when a tag specifically denotes a noncompliant endpoint in a private-access application that requires device trust as well as user identity; this is its actual operating effect, rather than an unrelated feature from the other choices. A useful confirmation would find that the configured action denies devices carrying the noncompliant tag; the rollout must also respect this constraint: Define whether a tag means compliant or noncompliant before using it for admission.

Incorrect Answers

A:

The described behavior is part of ‘Configure pre-connection posture enforcement’, used to block an untrusted FortiClient endpoint before it establishes its protected cloud tunnel instead of the role of ‘Review the posture tag's allow or deny direction’. In contrast to ‘Configure pre-connection posture enforcement’, ‘Review the posture tag's allow or deny direction’ follows a different mechanism: an allow-when-tagged versus deny-when-tagged action determines whether the matched posture condition grants connectivity. Treating ‘Configure pre-connection posture enforcement’ as equivalent would not address devices labeled as risky are inadvertently allowed by an inverted preconnection action in a private-access application that requires device trust as well as user identity.

B:

The described behavior is part of ‘Use a certificate-based posture check’, used to identify managed endpoints that carry an enterprise-issued device credential instead of the role of ‘Review the posture tag's allow or deny direction’. In contrast to ‘Use a certificate-based posture check’, ‘Review the posture tag's allow or deny direction’ follows a different mechanism: an allow-when-tagged versus deny-when-tagged action determines whether the matched posture condition grants connectivity. Treating ‘Use a certificate-based posture check’ as equivalent would not address devices labeled as risky are inadvertently allowed by an inverted preconnection action in a private-access application that requires device trust as well as user identity.

C:

The described behavior is part of ‘Build a security posture tag rule’, used to label endpoints dynamically when a specified local security condition is met instead of the role of ‘Review the posture tag's allow or deny direction’. In contrast to ‘Build a security posture tag rule’, ‘Review the posture tag's allow or deny direction’ follows a different mechanism: an allow-when-tagged versus deny-when-tagged action determines whether the matched posture condition grants connectivity. Treating ‘Build a security posture tag rule’ as equivalent would not address devices labeled as risky are inadvertently allowed by an inverted preconnection action in a private-access application that requires device trust as well as user identity.

Question 724

During an authorized lab exercise for a logistics site where routing and SD-WAN services have separate responsibilities, a reviewer needs proof the deployment can select a path only after it meets the performance objective for that particular application. Which observation most directly validates it?

  1. The active service shows the chosen health-check target and candidate SLA outcomes.
  2. The matched service specifies the corresponding DSCP codepoint and steers marked packets.
  3. The jitter-ranked rule prefers the link reporting less packet-delay variation.
  4. Separate old and new session entries reveal their actual selected interfaces.

Explanation

Correct Answer

A:

This checks ‘Use an SLA target within an SD-WAN service rule’ at the correct operational boundary: associating a service rule with an SLA target filters or prioritizes measured candidates based on the rule's strategy. It demonstrates the specific capability to select a path only after it meets the performance objective for that particular application in a logistics site where routing and SD-WAN services have separate responsibilities; deployment should additionally respect the constraint: A health check without a service rule association may not control this application's steering.

Incorrect Answers

B:

That observation belongs to ‘Use DSCP-based SD-WAN steering’, not ‘Use an SLA target within an SD-WAN service rule’; its purpose is to distinguish preclassified media packets from ordinary web traffic at path-selection time, the underlying behavior is that dSCP match criteria can steer traffic carrying designated IP-header service markings. The reviewer is instead verifying ‘Use an SLA target within an SD-WAN service rule’ for a logistics site where routing and SD-WAN services have separate responsibilities, not the evidence produced by ‘Use DSCP-based SD-WAN steering’.

C:

That observation belongs to ‘Use Best Quality with jitter’, not ‘Use an SLA target within an SD-WAN service rule’; its purpose is to steer delay-sensitive conferencing toward the most stable path, the underlying behavior is that Best Quality can evaluate jitter as the link-cost factor to compare delay variation. The reviewer is instead verifying ‘Use an SLA target within an SD-WAN service rule’ for a logistics site where routing and SD-WAN services have separate responsibilities, not the evidence produced by ‘Use Best Quality with jitter’.

D:

That observation belongs to ‘Treat existing sessions differently from new flows’, not ‘Use an SLA target within an SD-WAN service rule’; its purpose is to troubleshoot a session that remains associated with an earlier selection after an SD-WAN change, the underlying behavior is that session state and configured failover behavior affect when path changes apply; newly created flows are evaluated against current steering. The reviewer is instead verifying ‘Use an SLA target within an SD-WAN service rule’ for a logistics site where routing and SD-WAN services have separate responsibilities, not the evidence produced by ‘Treat existing sessions differently from new flows’.

Question 725

Within a branch experiencing intermittent packet loss during video meetings, after the rollout, operators find that new sessions keep selecting an uplink that no longer reaches monitored destinations. Where should they focus troubleshooting?

  1. Investigate: Set packet-loss SLA threshold
  2. Investigate: Use probe loss to trigger failover
  3. Investigate: Use SLA measurements for best-quality steering
  4. Investigate: Assign the relevant member set to a health check
  5. Investigate: Observe recovery of a monitored member

Explanation

Correct Answer

B:

The symptom identifies the missing operational behavior: failed health checks can withdraw the broken member's routes from the SD-WAN eligible path group. For a branch experiencing intermittent packet loss during video meetings, a direct diagnostic confirmation would be that the failed member becomes ineligible while a healthy route is preferred; during repair, healthy alternate routing must exist for traffic to continue.

Incorrect Answers

A:

A loss target evaluates the fraction of missing probes or measured packets before declaring SLA compliance, which serves the different requirement to protect application sessions from a link that intermittently drops packets instead of the behavior delivered by ‘Use probe loss to trigger failover’. If that component were misconfigured, a more characteristic finding would be that voice quality degrades on a path with normal latency but elevated loss; the actual report concerns new sessions keep selecting an uplink that no longer reaches monitored destinations at a branch experiencing intermittent packet loss during video meetings.

C:

Best Quality uses configured quality criteria derived from a health check to prioritize the most suitable available member, which serves the different requirement to feed measured latency, jitter, or loss into a dynamic path-selection rule instead of the behavior delivered by ‘Use probe loss to trigger failover’. If that component were misconfigured, a more characteristic finding would be that a best-quality rule has no meaningful measured quality input for its preferred links; the actual report concerns new sessions keep selecting an uplink that no longer reaches monitored destinations at a branch experiencing intermittent packet loss during video meetings.

D:

An SD-WAN health check monitors the configured member interfaces instead of automatically representing every interface, which serves the different requirement to compare only the transport members serving a given application class instead of the behavior delivered by ‘Use probe loss to trigger failover’. If that component were misconfigured, a more characteristic finding would be that a backup VPN is never included in the app's observed SLA metrics; the actual report concerns new sessions keep selecting an uplink that no longer reaches monitored destinations at a branch experiencing intermittent packet loss during video meetings.

E:

When a previously failed link passes the required health check, its SD-WAN route eligibility can be restored, which serves the different requirement to return a repaired WAN path to eligibility after health checks recover instead of the behavior delivered by ‘Use probe loss to trigger failover’. If that component were misconfigured, a more characteristic finding would be that the ISP is repaired yet the member remains marked failed due to probe failure; the actual report concerns new sessions keep selecting an uplink that no longer reaches monitored destinations at a branch experiencing intermittent packet loss during video meetings.

Question 726

During an authorized lab exercise for a remote access monthly review for the SASE operations team, the incident notes state that an ISP usage spike is blamed on anonymous traffic without identifying the active user groups. Which change is most relevant to this symptom?

  1. Investigate: Compare user traffic volume trends
  2. Investigate: Review application usage reports
  3. Investigate: Trend security events by category
  4. Investigate: Correlate policy action with destination risk

Explanation

Correct Answer

A:

The symptom identifies the missing operational behavior: user traffic analytics aggregate bytes and sessions by identity and time for usage investigation. For a remote access monthly review for the SASE operations team, a direct diagnostic confirmation would be that the time-filtered report ranks user or group traffic volume for the affected interval; during repair, traffic volume alone is not evidence that a session is malicious.

Incorrect Answers

B:

Application analytics classify observed traffic into recognizable applications for reporting, which serves the different requirement to identify which SaaS or application class dominates inspected remote traffic instead of the behavior delivered by ‘Compare user traffic volume trends’. If that component were misconfigured, a more characteristic finding would be that the help desk cannot determine whether collaboration usage or software updates caused an increase; the actual report concerns an ISP usage spike is blamed on anonymous traffic without identifying the active user groups at a remote access monthly review for the SASE operations team.

C:

Security reporting aggregates action and threat categories so changes can be compared across time, which serves the different requirement to measure whether a newly deployed protection reduced observed prohibited activity instead of the behavior delivered by ‘Compare user traffic volume trends’. If that component were misconfigured, a more characteristic finding would be that operators compare total traffic only and miss a rise in blocked high-risk web requests; the actual report concerns an ISP usage spike is blamed on anonymous traffic without identifying the active user groups at a remote access monthly review for the SASE operations team.

D:

Security analytics can group blocked traffic by destination or policy to reveal recurring patterns, which serves the different requirement to identify repeated attempts to reach restricted destinations across remote users instead of the behavior delivered by ‘Compare user traffic volume trends’. If that component were misconfigured, a more characteristic finding would be that a burst of denials is reported without knowing whether one bad domain or many sites were involved; the actual report concerns an ISP usage spike is blamed on anonymous traffic without identifying the active user groups at a remote access monthly review for the SASE operations team.

Question 727

At a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs, the change board is evaluating ‘Disable a maintenance member’. Which technical consideration must be built into the plan?

  1. Ensure remaining members provide viable routes and sufficient capacity.
  2. Cost does not replace health measurements or firewall policy matching.
  3. The tunnel interfaces must first be configured and eligible to join SD-WAN.
  4. Review policies and static routes referencing the source zone before moving the member.

Explanation

Correct Answer

A:

This condition matters for ‘Disable a maintenance member’ because disabling an SD-WAN member removes it from eligible SD-WAN selection without requiring deletion of its configuration. Omitting the relevant safeguard can produce the drained circuit is still chosen for new flows during maintenance; a successful test at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs would instead demonstrate that member status shows the maintenance circuit disabled and other members eligible.

Incorrect Answers

B:

The condition is associated with ‘Set member cost’, a mechanism used to favor a lower-priced uplink only when eligible under lowest-cost SLA rules instead of ‘Disable a maintenance member’, because the cost field ranks SLA-qualified members for the Lowest Cost strategy, with smaller values preferred. For ‘Disable a maintenance member’, unlike ‘Set member cost’, the characteristic failure would be the drained circuit is still chosen for new flows during maintenance, which this alternative prerequisite would not directly address at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs.

C:

The condition is associated with ‘Create a dedicated overlay zone’, a mechanism used to group IPsec tunnel interfaces separately from physical WAN underlays instead of ‘Disable a maintenance member’, because overlay zones provide distinct policy and route targets for tunnel traffic bound for private networks. For ‘Disable a maintenance member’, unlike ‘Create a dedicated overlay zone’, the characteristic failure would be the drained circuit is still chosen for new flows during maintenance, which this alternative prerequisite would not directly address at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs.

D:

The condition is associated with ‘Move a member between zones’, a mechanism used to change how one interface is referenced by routes and policies without rebuilding the WAN port instead of ‘Disable a maintenance member’, because reassigning the member to a different zone changes its logical policy and rule membership. For ‘Disable a maintenance member’, unlike ‘Move a member between zones’, the characteristic failure would be the drained circuit is still chosen for new flows during maintenance, which this alternative prerequisite would not directly address at a small datacenter with a physical circuit, a cellular backup and tagged VLAN handoffs.

Question 728

For a cloud security tenant inspecting traffic from managed remote laptops, an audit asks for evidence that the team can inspect cloud-service data through supported SaaS APIs rather than only inline user sessions. Which finding would answer that question?

  1. The connected SaaS application's API scans produce inventory and findings about stored content.
  2. An IPS security event identifies the signature and the resulting block or monitor action.
  3. The design enforces both baseline web protection and SaaS-specific application policy.
  4. The site is rendered within the configured isolation workflow rather than the local browser engine.

Explanation

Correct Answer

A:

This checks ‘Use cloud API CASB for SaaS data at rest’ at the correct operational boundary: aPI-connected CASB can examine supported SaaS tenant content and events without requiring every action to cross the inline proxy. It demonstrates the specific capability to inspect cloud-service data through supported SaaS APIs rather than only inline user sessions in a cloud security tenant inspecting traffic from managed remote laptops; deployment should additionally respect the constraint: API authorization and provider support differ from inline real-time access controls.

Incorrect Answers

B:

That observation belongs to ‘Enable intrusion prevention’, not ‘Use cloud API CASB for SaaS data at rest’; its purpose is to detect and block network exploits recognized by attack signatures or protocol decoders, the underlying behavior is that IPS analyzes supported traffic patterns against intrusion-detection signatures and configured actions. The reviewer is instead verifying ‘Use cloud API CASB for SaaS data at rest’ for a cloud security tenant inspecting traffic from managed remote laptops, not the evidence produced by ‘Enable intrusion prevention’.

C:

That observation belongs to ‘Distinguish SIA from SSA policy intent’, not ‘Use cloud API CASB for SaaS data at rest’; its purpose is to apply general internet threat protection separately from SaaS-specific data and tenant controls, the underlying behavior is that SIA focuses on internet-bound security inspection while SSA adds cloud-application controls such as inline CASB or DLP. The reviewer is instead verifying ‘Use cloud API CASB for SaaS data at rest’ for a cloud security tenant inspecting traffic from managed remote laptops, not the evidence produced by ‘Distinguish SIA from SSA policy intent’.

D:

That observation belongs to ‘Apply remote browser isolation for risky sites’, not ‘Use cloud API CASB for SaaS data at rest’; its purpose is to isolate web rendering from the endpoint when access is required to a questionable website, the underlying behavior is that remote Browser Isolation executes supported browsing in an isolated remote context and streams a safer representation. The reviewer is instead verifying ‘Use cloud API CASB for SaaS data at rest’ for a cloud security tenant inspecting traffic from managed remote laptops, not the evidence produced by ‘Apply remote browser isolation for risky sites’.

Question 729

For a video collaboration office using two simultaneously healthy circuits, a review of the current state finds that all traffic to the server uses the special circuit instead of only the target application port. Which configuration area most directly addresses this?

  1. Investigate: Treat existing sessions differently from new flows
  2. Investigate: Match service protocol and port
  3. Investigate: Use DSCP-based SD-WAN steering
  4. Investigate: Match a source subnet in an SD-WAN rule

Explanation

Correct Answer

B:

The symptom identifies the missing operational behavior: service matching narrows selection by transport protocol and destination-port criteria. For a video collaboration office using two simultaneously healthy circuits, a direct diagnostic confirmation would be that the rule matches the intended TCP or UDP service and leaves other ports to later rules; during repair, port matching cannot reliably distinguish applications that share or change ports.

Incorrect Answers

A:

Session state and configured failover behavior affect when path changes apply; newly created flows are evaluated against current steering, which serves the different requirement to troubleshoot a session that remains associated with an earlier selection after an SD-WAN change instead of the behavior delivered by ‘Match service protocol and port’. If that component were misconfigured, a more characteristic finding would be that fresh sessions choose the new preferred WAN while established sessions appear on the old member; the actual report concerns all traffic to the server uses the special circuit instead of only the target application port at a video collaboration office using two simultaneously healthy circuits.

C:

DSCP match criteria can steer traffic carrying designated IP-header service markings, which serves the different requirement to distinguish preclassified media packets from ordinary web traffic at path-selection time instead of the behavior delivered by ‘Match service protocol and port’. If that component were misconfigured, a more characteristic finding would be that voice packets bearing priority markings share the generic internet selection rule; the actual report concerns all traffic to the server uses the special circuit instead of only the target application port at a video collaboration office using two simultaneously healthy circuits.

D:

Source-address criteria restrict SD-WAN rule matching to sessions from specified client address ranges, which serves the different requirement to apply a special path selection only to traffic originating in one department network instead of the behavior delivered by ‘Match service protocol and port’. If that component were misconfigured, a more characteristic finding would be that all departments are steered to a premium link even though only the trading subnet needs it; the actual report concerns all traffic to the server uses the special circuit instead of only the target application port at a video collaboration office using two simultaneously healthy circuits.

Question 730

At a finance team that uses multiple approved SaaS applications, an engineer is preparing ‘Configure application control signatures’ to block a specific risky application without disabling every website in its category. Which TWO statements identify a pertinent deployment safeguard and a direct post-change validation result? Choose TWO.

  1. Port-only access controls are not the same as identifying an application signature.
  2. The access policy references the correct profile group and test detections appear.
  3. Application-control logs identify the named app and enforced action.
  4. An internet security tunnel does not by itself supply every application-specific SaaS control.
  5. Use the narrowest necessary exception to avoid weakening protection broadly.

Explanation

Correct Answers

A:

This safeguard applies to ‘Configure application control signatures’, which works because Application Control identifies application behavior and can apply signature-level allow, monitor, or block actions. Without the correct deployment condition, operators may see that a prohibited app runs over common HTTPS and evades a simple destination-port rule in a finance team that uses multiple approved SaaS applications.

C:

The observation follows from the operation of ‘Configure application control signatures’: Application Control identifies application behavior and can apply signature-level allow, monitor, or block actions. It directly tests the requested ability to block a specific risky application without disabling every website in its category in a finance team that uses multiple approved SaaS applications, rather than another policy or network layer.

Incorrect Answers

B:

This result would validate ‘Create a security profile group’, not ‘Configure application control signatures’, because a profile group bundles web, application, SSL, and other security controls for policy attachment. That separate implementation serves apply a consistent set of inspection components to selected allowed SASE traffic policies, whereas the audit needs evidence specifically of ‘Configure application control signatures’ at a finance team that uses multiple approved SaaS applications.

D:

The planning point is associated with ‘Distinguish SIA from SSA policy intent’, not ‘Configure application control signatures’; its real role is to apply general internet threat protection separately from SaaS-specific data and tenant controls. The required deployment instead centers on ‘Configure application control signatures’, rather than ‘Distinguish SIA from SSA policy intent’; the distinct symptom to guard against is that a prohibited app runs over common HTTPS and evades a simple destination-port rule.

E:

The planning point is associated with ‘Use a specific URL filter exception’, not ‘Configure application control signatures’; its real role is to allow a justified business website without disabling an entire restrictive category. The required deployment instead centers on ‘Configure application control signatures’, rather than ‘Use a specific URL filter exception’; the distinct symptom to guard against is that a prohibited app runs over common HTTPS and evades a simple destination-port rule.

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests