Question 230
A risk register update for the semiconductor fabrication facility documents the following technical gaps: (1) repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold; and (2) the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. Which paired action most directly satisfies both findings without introducing an unrelated control change?
- Build a FortiSIEM correlation rule with appropriate conditions and time window; then use only general IT vulnerability totals without industrial asset exposure context
- Configure a static asset inventory export as the detection rule; then use only general IT vulnerability totals without industrial asset exposure context
- Configure a static asset inventory export as the detection rule; then review the OT Security Risk report and validate its source data and scope
- Map meaningful triggered attributes into the incident details and review parsed device fields; then review the OT Security Risk report and validate its source data and scope
- Build a FortiSIEM correlation rule with appropriate conditions and time window; then review the OT Security Risk report and validate its source data and scope
Explanation
Correct Answer
E:The first control fits because rule aggregation across related events can identify repeated suspicious behavior rather than separate isolated messages; the second fits because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization. Together they resolve the separate findings at the semiconductor fabrication facility: repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold, and the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. This addresses repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold without bypassing the separate requirement that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene.
Incorrect Answers
A:The first action is suitable because rule aggregation across related events can identify repeated suspicious behavior rather than separate isolated messages; the second is misdirected because generic IT totals can overlook the exposure and operational consequence of specific controllers. At the semiconductor fabrication facility, the remaining second gap is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, even though repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold is covered.
B:The first substitution fails because an inventory snapshot does not evaluate event frequency over time; the second fails because generic IT totals can overlook the exposure and operational consequence of specific controllers. For this semiconductor fabrication facility, the first finding is that repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold, while the other is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; neither is corrected by the chosen substitutions.
C:The second part is useful because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization; however, the first part fails because an inventory snapshot does not evaluate event frequency over time. The first gap remains unresolved at the semiconductor fabrication facility: repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold; the second measure helps with the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene but cannot repair it.
D:The second action addresses the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization, but the separate first finding still concerns repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold. The proposed first mechanism belongs to a different requirement: a rule tests event sequences but the analyst cannot identify the actual controller that triggered an incident; the triggered context should retain the affected industrial entity to support triage and follow-up, but despite the valid second control for the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, it does not resolve the first finding at the semiconductor fabrication facility: repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold.
Question 231
The offshore pumping platform is preparing a controlled rollout. One outstanding requirement is that remote engineers must prove a second factor before accessing a restricted OT management service. The proposed shortcut is to depend solely on knowledge of the engineer's IP address. Which alternative should the architect approve instead?
- Depend solely on knowledge of the engineer's IP address
- Apply identity-aware firewall rules using the authenticated user group
- Record the authentication source and narrowly scoped authorization policy separately
- Require supported multi-factor authentication for the administrative sign-in
Explanation
Correct Answer
D:The relevant technical distinction for the offshore pumping platform is that a second independent authentication factor reduces reliance on a stolen password for human access; that directly resolves the requirement that remote engineers must prove a second factor before accessing a restricted OT management service.
Incorrect Answers
A:The mismatch at the offshore pumping platform is specific to the observed control requirement: network origin is neither an individual identity proof nor a second factor; it leaves unresolved the finding that remote engineers must prove a second factor before accessing a restricted OT management service.
B:At the offshore pumping platform, this mechanism serves the separate situation where firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, whereas the present finding is that remote engineers must prove a second factor before accessing a restricted OT management service; although group-scoped authorization links a verified human identity to the permitted network session, the required capability remains missing.
C:At the offshore pumping platform, this mechanism serves the separate situation where the security review demands auditable separation between identity verification and permission to operate a controller, whereas the present finding is that remote engineers must prove a second factor before accessing a restricted OT management service; although proving who a person is and determining what that person may access are distinct security decisions, the required capability remains missing.
Question 232
During an OT readiness check at the glass manufacturing line, managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. The proposed shortcut is to export the firewall's unfiltered current session table once. Which alternative should the architect approve instead?
- Drill into the supporting events, devices and time range behind the report
- Export the firewall's unfiltered current session table once
- Filter the dashboard on the OT site, incident dimensions and period of interest
- Schedule and scope a FortiAnalyzer report using appropriate OT datasets
Explanation
Correct Answer
D:For the stated gap at the glass manufacturing line, reports aggregate retained security data into a repeatable operational review artifact; that directly resolves the requirement that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs.
Incorrect Answers
A:At the glass manufacturing line, this mechanism serves the separate situation where incident responders need to investigate why a FortiAnalyzer aggregate chart spikes on one production unit, whereas the present finding is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs; although source event details are needed to separate a real security change from collection noise, the required capability remains missing.
B:At the glass manufacturing line, that alternative is insufficient because a one-time active-session snapshot is not a historical threat trend report; it leaves unresolved the finding that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs.
C:At the glass manufacturing line, this mechanism serves the separate situation where operations wants a site-specific FortiSIEM dashboard rather than a corporate-wide incident summary, whereas the present finding is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs; although site and time scoping align the visualization with local risk owners, the required capability remains missing.
Question 233
During troubleshooting of the rail signaling depot, the operator confirms that a rule tests event sequences but the analyst cannot identify the actual controller that triggered an incident. What is the most targeted response?
- Map meaningful triggered attributes into the incident details and review parsed device fields
- Validate log collection and parsing into normalized FortiSIEM event attributes
- Test the rule against real normalized events and adjust field mappings or predicates
- Discard host identifiers after correlation to reduce table width
Explanation
Correct Answer
A:For the stated gap at the rail signaling depot, the triggered context should retain the affected industrial entity to support triage and follow-up; that directly resolves the requirement that a rule tests event sequences but the analyst cannot identify the actual controller that triggered an incident.
Incorrect Answers
B:At the rail signaling depot, this mechanism serves the separate situation where logs from industrial devices arrive but different vendors use inconsistent source and device fields, whereas the present finding is that a rule tests event sequences but the analyst cannot identify the actual controller that triggered an incident; although consistent event attributes allow analytics to compare signals from different OT sources, the required capability remains missing.
C:At the rail signaling depot, this mechanism serves the separate situation where a SIEM correlation rule has been created but produces no incidents because its conditions never match the actual parsed fields, whereas the present finding is that a rule tests event sequences but the analyst cannot identify the actual controller that triggered an incident; although correlation depends on the event attributes and window really produced by the data sources, the required capability remains missing.
D:At the rail signaling depot, that alternative is insufficient because losing identifying fields makes the resulting incident harder to investigate and contain; it leaves unresolved the finding that a rule tests event sequences but the analyst cannot identify the actual controller that triggered an incident.
Question 234
A post-installation check at the bulk-material handling facility finds two outstanding configuration gaps: (1) analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule; and (2) an unregistered maintenance laptop should be unable to join the production VLAN until approved. What two-part implementation is the most precise response to the stated requirements?
- Examine policy order and actual policy-hit or traffic logs; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
- Examine policy order and actual policy-hit or traffic logs; then place all newly seen endpoints immediately in the production VLAN
- Enable more logging on the narrow rule while leaving the higher matching policy in place; then place all newly seen endpoints immediately in the production VLAN
- Enable more logging on the narrow rule while leaving the higher matching policy in place; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
Explanation
Correct Answer
A:The first control fits because FortiGate evaluates the applicable policy and a preceding broad match can shadow a narrow intended rule; the second fits because unknown endpoints can be put into a restricted VLAN pending their registration and authorization. Together they resolve the separate findings at the bulk-material handling facility: analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule, and an unregistered maintenance laptop should be unable to join the production VLAN until approved. This addresses analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule without bypassing the separate requirement that an unregistered maintenance laptop should be unable to join the production VLAN until approved.
Incorrect Answers
B:The first action is suitable because FortiGate evaluates the applicable policy and a preceding broad match can shadow a narrow intended rule; the second is misdirected because open admission undermines the stated unknown-device quarantine policy. At the bulk-material handling facility, the remaining second gap is that an unregistered maintenance laptop should be unable to join the production VLAN until approved, even though analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule is covered.
C:The first substitution fails because extra logging on a shadowed rule does not make traffic select that rule ahead of an earlier match; the second fails because open admission undermines the stated unknown-device quarantine policy. For this bulk-material handling facility, the first finding is that analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule, while the other is that an unregistered maintenance laptop should be unable to join the production VLAN until approved; neither is corrected by the chosen substitutions.
D:The second part is useful because unknown endpoints can be put into a restricted VLAN pending their registration and authorization; however, the first part fails because extra logging on a shadowed rule does not make traffic select that rule ahead of an earlier match. The first gap remains unresolved at the bulk-material handling facility: analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule; the second measure helps with an unregistered maintenance laptop should be unable to join the production VLAN until approved but cannot repair it.
Question 235
During a maintenance-window design exercise for the wastewater pumping station, the team notes: (1) investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile; and (2) the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile. Which paired configuration should be included in the approved OT security change?
- Examine both firewall traffic action logs and security-profile event details; then expand the dashboard widget while leaving the routing bypass
- Deploy network-based IPS or virtual patch protection at the applicable segment boundary; then put the profile on the real traffic path through a matching firewall policy
- Examine both firewall traffic action logs and security-profile event details; then put the profile on the real traffic path through a matching firewall policy
- Examine only source and destination addresses without inspecting security-event action fields; then put the profile on the real traffic path through a matching firewall policy
- Examine only source and destination addresses without inspecting security-event action fields; then expand the dashboard widget while leaving the routing bypass
Explanation
Correct Answer
C:The first control fits because session policy decisions and IPS or application detections are different observations requiring correlation; the second fits because a policy-attached virtual patch is not effective for traffic that does not cross that policy. Together they resolve the separate findings at the wastewater pumping station: investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile, and the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile. This addresses investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile without bypassing the separate requirement that the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile.
Incorrect Answers
A:The first action is suitable because session policy decisions and IPS or application detections are different observations requiring correlation; the second is misdirected because dashboard presentation cannot force bypassing sessions through a mitigation point. At the wastewater pumping station, the remaining second gap is that the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile, even though investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile is covered.
B:The second action addresses the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile because a policy-attached virtual patch is not effective for traffic that does not cross that policy, but the separate first finding still concerns investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile. The proposed first mechanism belongs to a different requirement: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched, but despite the valid second control for the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile, it does not resolve the first finding at the wastewater pumping station: investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile.
D:The second part is useful because a policy-attached virtual patch is not effective for traffic that does not cross that policy; however, the first part fails because endpoint addressing cannot reveal whether the blocking decision came from policy matching or IPS. The first gap remains unresolved at the wastewater pumping station: investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile; the second measure helps with the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile but cannot repair it.
E:The first substitution fails because endpoint addressing cannot reveal whether the blocking decision came from policy matching or IPS; the second fails because dashboard presentation cannot force bypassing sessions through a mitigation point. For this wastewater pumping station, the first finding is that investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile, while the other is that the FortiGate knows an asset's vulnerability but its flow bypasses the firewall policy bearing the virtual patching profile; neither is corrected by the chosen substitutions.
Question 236
The design authority for the petrochemical blending plant reports this gap: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network. Which intervention best meets this specific requirement instead of addressing a different problem?
- Validate the industrial redundancy mechanism and the firewall failure behavior together
- Audit allowed tagged VLANs and native-VLAN behavior on both trunk ends
- Put a suitable intra-zone enforcement point on the actual device-to-device path
- Add a routed inter-VLAN policy without correcting allowed trunk VLANs
Explanation
Correct Answer
B:In this petrochemical blending plant scenario, consistent trunk membership prevents a control VLAN from being carried where it is not approved; that directly resolves the requirement that industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network.
Incorrect Answers
A:At the petrochemical blending plant, this mechanism serves the separate situation where a ring-topology automation network has stringent recovery-time requirements before a segmentation change, whereas the present finding is that industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network; although acceptable availability depends on convergence and failover characteristics of the whole industrial path, the required capability remains missing.
C:At the petrochemical blending plant, this mechanism serves the separate situation where an industrial device must stay in one fixed subnet and security must distinguish east-west flows on that subnet, whereas the present finding is that industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network; although microsegmentation requires the target communications to cross a control capable of applying per-flow rules, the required capability remains missing.
D:At the petrochemical blending plant, this substitutes a measure addressing a different concern: layer-three policy cannot repair frames leaked by an unintended layer-two trunk membership; it leaves unresolved the finding that industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network.
Question 237
Before exposing an OT interconnection at the electric distribution substation, the design must resolve both findings: (1) traffic from an engineer workstation and a safety controller shares one untagged broadcast domain; and (2) a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. Which proposal would pass both acceptance tests with the fewest irrelevant changes?
- Define distinct VLANs for the engineering and control populations; then inspect only traffic leaving the company for the Internet
- Install a router ACL while retaining the original shared layer-two segment; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths
- Install a router ACL while retaining the original shared layer-two segment; then inspect only traffic leaving the company for the Internet
- Define distinct VLANs for the engineering and control populations; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths
Explanation
Correct Answer
D:The first control fits because VLAN separation limits layer-two broadcast reach and enables more explicit inter-VLAN policy boundaries; the second fits because restricting east-west flows contains lateral movement that perimeter-only inspection would not see. Together they resolve the separate findings at the electric distribution substation: traffic from an engineer workstation and a safety controller shares one untagged broadcast domain, and a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. This addresses traffic from an engineer workstation and a safety controller shares one untagged broadcast domain without bypassing the separate requirement that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area.
Incorrect Answers
A:The first action is suitable because VLAN separation limits layer-two broadcast reach and enables more explicit inter-VLAN policy boundaries; the second is misdirected because external egress policy misses peer-to-peer communications within the industrial environment. At the electric distribution substation, the remaining second gap is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, even though traffic from an engineer workstation and a safety controller shares one untagged broadcast domain is covered.
B:The second part is useful because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; however, the first part fails because a routed ACL may filter subnet crossings but does not split a common layer-two broadcast domain. The first gap remains unresolved at the electric distribution substation: traffic from an engineer workstation and a safety controller shares one untagged broadcast domain; the second measure helps with a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area but cannot repair it.
C:The first substitution fails because a routed ACL may filter subnet crossings but does not split a common layer-two broadcast domain; the second fails because external egress policy misses peer-to-peer communications within the industrial environment. For this electric distribution substation, the first finding is that traffic from an engineer workstation and a safety controller shares one untagged broadcast domain, while the other is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; neither is corrected by the chosen substitutions.
Question 238
Before the cement kiln control room accepts a proposed OT security architecture, it must demonstrate: (1) a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; and (2) the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations. Which proposal would pass both acceptance tests with the fewest irrelevant changes?
- Apply the sensor to the actual matching firewall policy and confirm policy hits; then design Modbus-aware operation filtering where supported at the control conduit
- Apply the sensor to the actual matching firewall policy and confirm policy hits; then treat every Modbus packet as equally safe after allowing port 502
- Rename the unused application sensor in the object list; then design Modbus-aware operation filtering where supported at the control conduit
- Rename the unused application sensor in the object list; then treat every Modbus packet as equally safe after allowing port 502
Explanation
Correct Answer
A:The first control fits because security profiles act on traffic traversing the enabled policy, not merely on the profile object existing; the second fits because Modbus function-level distinctions matter because read and write requests can share one TCP service. Together they resolve the separate findings at the cement kiln control room: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule, and the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations. This addresses a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule without bypassing the separate requirement that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations.
Incorrect Answers
B:The first action is suitable because security profiles act on traffic traversing the enabled policy, not merely on the profile object existing; the second is misdirected because a common transport service does not restrict the embedded function being requested. At the cement kiln control room, the remaining second gap is that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations, even though a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule is covered.
C:The second part is useful because Modbus function-level distinctions matter because read and write requests can share one TCP service; however, the first part fails because naming an unattached profile does not inspect the sessions reaching the plant. The first gap remains unresolved at the cement kiln control room: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; the second measure helps with the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations but cannot repair it.
D:The first substitution fails because naming an unattached profile does not inspect the sessions reaching the plant; the second fails because a common transport service does not restrict the embedded function being requested. For this cement kiln control room, the first finding is that a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule, while the other is that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations; neither is corrected by the chosen substitutions.
Question 239
A security assessment of the petrochemical blending plant records two issues: (1) an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription; and (2) EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities. Which proposal fixes both issues while leaving unrelated OT workloads alone?
- Verify the relevant FortiGuard OT Security Service license before relying on the package; then distinguish necessary cyclic industrial communications from unnecessary management or engineering access
- Update the generic IPS definitions without checking the separate OT entitlement; then treat all EtherNet/IP-associated services as one unrestricted application
- Verify the relevant FortiGuard OT Security Service license before relying on the package; then treat all EtherNet/IP-associated services as one unrestricted application
- Update the generic IPS definitions without checking the separate OT entitlement; then distinguish necessary cyclic industrial communications from unnecessary management or engineering access
Explanation
Correct Answer
A:The first control fits because dedicated OT definitions depend on service entitlement as well as successful distribution and applied inspection; the second fits because EtherNet/IP operational traffic and configuration reachability can require different security treatment. Together they resolve the separate findings at the petrochemical blending plant: an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription, and EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities. This addresses an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription without bypassing the separate requirement that EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities.
Incorrect Answers
B:The first substitution fails because generic IPS updates cannot substitute for an unlicensed dedicated OT signature package; the second fails because a family-level blanket permit loses the ability to narrow sensitive maintenance behavior. For this petrochemical blending plant, the first finding is that an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription, while the other is that EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities; neither is corrected by the chosen substitutions.
C:The first action is suitable because dedicated OT definitions depend on service entitlement as well as successful distribution and applied inspection; the second is misdirected because a family-level blanket permit loses the ability to narrow sensitive maintenance behavior. At the petrochemical blending plant, the remaining second gap is that EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities, even though an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription is covered.
D:The second part is useful because EtherNet/IP operational traffic and configuration reachability can require different security treatment; however, the first part fails because generic IPS updates cannot substitute for an unlicensed dedicated OT signature package. The first gap remains unresolved at the petrochemical blending plant: an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription; the second measure helps with EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities but cannot repair it.
Question 240
At a hydroelectric generation site, engineers must address both of these documented gaps: (1) investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile; and (2) a device has an identified vulnerability but its vendor update cannot be applied until the next outage. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.
- Apply appropriate virtual patching coverage to the matching device traffic
- Declare the endpoint permanently remediated without testing the mitigation
- Change the relevant signature action under a tested IPS profile and policy
- Examine both firewall traffic action logs and security-profile event details
- Examine only source and destination addresses without inspecting security-event action fields
Explanation
Correct Answers
A:For the stated gap at the hydroelectric generation site, virtual patching can use vulnerability-linked network mitigations without changing the controller firmware immediately; that directly resolves the requirement that a device has an identified vulnerability but its vendor update cannot be applied until the next outage; it is evaluated alongside the separate requirement that investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile.
D:In this hydroelectric generation site scenario, session policy decisions and IPS or application detections are different observations requiring correlation; that directly resolves the requirement that investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile; it is evaluated alongside the separate requirement that a device has an identified vulnerability but its vendor update cannot be applied until the next outage.
Incorrect Answers
B:At the hydroelectric generation site, that alternative is insufficient because a network workaround does not replace the underlying vendor patch or validate the residual exposure; it leaves unresolved the finding that a device has an identified vulnerability but its vendor update cannot be applied until the next outage; the parallel design also has to address investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile.
C:At the hydroelectric generation site, this mechanism serves the separate situation where an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature, whereas the present finding is that investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile; although alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path, the required capability remains missing.
E:At the hydroelectric generation site, this substitutes a measure addressing a different concern: endpoint addressing cannot reveal whether the blocking decision came from policy matching or IPS; it leaves unresolved the finding that investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile; the parallel design also has to address a device has an identified vulnerability but its vendor update cannot be applied until the next outage.