Question 330
A post-installation check at the hydroelectric generation site finds two outstanding configuration gaps: (1) a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices; and (2) the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall. Which plan provides the needed control for each finding rather than a superficial substitute?
- Use a controlled remote-access termination and a monitored jump host into permitted OT destinations; then create a shared local administrator password for all contractors
- Publish the controller management ports directly to the Internet; then create a shared local administrator password for all contractors
- Publish the controller management ports directly to the Internet; then integrate a supported remote authentication provider and map the appropriate user group
- Use a controlled remote-access termination and a monitored jump host into permitted OT destinations; then integrate a supported remote authentication provider and map the appropriate user group
Explanation
Correct Answer
D:The first control fits because brokered privileged access reduces direct exposure and supports session accountability; the second fits because centralized identity can validate named users and keep role-based policies aligned with directory membership. Together they resolve the separate findings at the hydroelectric generation site: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, and the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall. This addresses a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices without bypassing the separate requirement that the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall.
Incorrect Answers
A:The first action is suitable because brokered privileged access reduces direct exposure and supports session accountability; the second is misdirected because shared credentials lose per-user identity and complicate revocation and accountability. At the hydroelectric generation site, the remaining second gap is that the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall, even though a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices is covered.
B:The first substitution fails because exposing native device interfaces bypasses the controlled remote-administration boundary; the second fails because shared credentials lose per-user identity and complicate revocation and accountability. For this hydroelectric generation site, the first finding is that a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, while the other is that the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall; neither is corrected by the chosen substitutions.
C:The second part is useful because centralized identity can validate named users and keep role-based policies aligned with directory membership; however, the first part fails because exposing native device interfaces bypasses the controlled remote-administration boundary. The first gap remains unresolved at the hydroelectric generation site: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices; the second measure helps with the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall but cannot repair it.
Question 331
At an OT architecture workshop covering the paper mill control network, the priority items are: (1) the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs; and (2) an unregistered maintenance laptop should be unable to join the production VLAN until approved. Which paired action most directly satisfies both findings without introducing an unrelated control change?
- Create more descriptive VLAN names and keep the router unrestricted; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
- Create more descriptive VLAN names and keep the router unrestricted; then place all newly seen endpoints immediately in the production VLAN
- Add explicit inter-VLAN firewall policy at the routing boundary; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
- Keep cell-specific forwarding contexts logically isolated and define explicit interconnections; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
- Add explicit inter-VLAN firewall policy at the routing boundary; then place all newly seen endpoints immediately in the production VLAN
Explanation
Correct Answer
C:The first control fits because separate layer-two membership does not automatically prevent routed communication through an allowed path; the second fits because unknown endpoints can be put into a restricted VLAN pending their registration and authorization. Together they resolve the separate findings at the paper mill control network: the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs, and an unregistered maintenance laptop should be unable to join the production VLAN until approved. This addresses the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs without bypassing the separate requirement that an unregistered maintenance laptop should be unable to join the production VLAN until approved.
Incorrect Answers
A:The second part is useful because unknown endpoints can be put into a restricted VLAN pending their registration and authorization; however, the first part fails because naming network segments changes no layer-three authorization decisions. The first gap remains unresolved at the paper mill control network: the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs; the second measure helps with an unregistered maintenance laptop should be unable to join the production VLAN until approved but cannot repair it.
B:The first substitution fails because naming network segments changes no layer-three authorization decisions; the second fails because open admission undermines the stated unknown-device quarantine policy. For this paper mill control network, the first finding is that the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs, while the other is that an unregistered maintenance laptop should be unable to join the production VLAN until approved; neither is corrected by the chosen substitutions.
D:The second action addresses an unregistered maintenance laptop should be unable to join the production VLAN until approved because unknown endpoints can be put into a restricted VLAN pending their registration and authorization, but the separate first finding still concerns the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs. The proposed first mechanism belongs to a different requirement: multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks; separate routing contexts prevent accidental overlap while making required shared services deliberate, but despite the valid second control for an unregistered maintenance laptop should be unable to join the production VLAN until approved, it does not resolve the first finding at the paper mill control network: the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs.
E:The first action is suitable because separate layer-two membership does not automatically prevent routed communication through an allowed path; the second is misdirected because open admission undermines the stated unknown-device quarantine policy. At the paper mill control network, the remaining second gap is that an unregistered maintenance laptop should be unable to join the production VLAN until approved, even though the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs is covered.
Question 332
A security assessment of the food-processing factory records two issues: (1) a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; and (2) IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. Which plan provides the needed control for each finding rather than a superficial substitute?
- Deploy network-based IPS or virtual patch protection at the applicable segment boundary; then expose IEC 104 services to any routable corporate address
- Deploy network-based IPS or virtual patch protection at the applicable segment boundary; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
- Install an endpoint detection agent on the unsupported controller firmware; then expose IEC 104 services to any routable corporate address
- Change the relevant signature action under a tested IPS profile and policy; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
- Install an endpoint detection agent on the unsupported controller firmware; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
Explanation
Correct Answer
B:The first control fits because inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched; the second fits because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface. Together they resolve the separate findings at the food-processing factory: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller, and IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. This addresses a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller without bypassing the separate requirement that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries.
Incorrect Answers
A:The first action is suitable because inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched; the second is misdirected because broad routed availability violates the small set of approved SCADA relationships. At the food-processing factory, the remaining second gap is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, even though a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller is covered.
C:The first substitution fails because a legacy PLC may not run a general-purpose endpoint agent and this is not a practical network control; the second fails because broad routed availability violates the small set of approved SCADA relationships. For this food-processing factory, the first finding is that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller, while the other is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries; neither is corrected by the chosen substitutions.
D:The second action addresses IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface, but the separate first finding still concerns a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller. The proposed first mechanism belongs to a different requirement: an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature; alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path, but despite the valid second control for IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, it does not resolve the first finding at the food-processing factory: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller.
E:The second part is useful because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface; however, the first part fails because a legacy PLC may not run a general-purpose endpoint agent and this is not a practical network control. The first gap remains unresolved at the food-processing factory: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; the second measure helps with IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries but cannot repair it.
Question 333
The operations team at the solar power operations center requests a solution to both recorded symptoms: (1) a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype; and (2) the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. Which plan provides the needed control for each finding rather than a superficial substitute?
- Narrow the selected log sources and filtering fields to the relevant OT events; then use only general IT vulnerability totals without industrial asset exposure context
- Change notification priority while leaving the handler's log-field selection unchanged; then review the OT Security Risk report and validate its source data and scope
- Narrow the selected log sources and filtering fields to the relevant OT events; then review the OT Security Risk report and validate its source data and scope
- Change notification priority while leaving the handler's log-field selection unchanged; then use only general IT vulnerability totals without industrial asset exposure context
Explanation
Correct Answer
C:The first control fits because the event handler's data selection and filters determine the events that qualify; the second fits because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization. Together they resolve the separate findings at the solar power operations center: a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype, and the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. This addresses a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype without bypassing the separate requirement that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene.
Incorrect Answers
A:The first action is suitable because the event handler's data selection and filters determine the events that qualify; the second is misdirected because generic IT totals can overlook the exposure and operational consequence of specific controllers. At the solar power operations center, the remaining second gap is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, even though a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype is covered.
B:The second part is useful because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization; however, the first part fails because alert priority changes cannot correct a predicate that matches unrelated log sources. The first gap remains unresolved at the solar power operations center: a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype; the second measure helps with the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene but cannot repair it.
D:The first substitution fails because alert priority changes cannot correct a predicate that matches unrelated log sources; the second fails because generic IT totals can overlook the exposure and operational consequence of specific controllers. For this solar power operations center, the first finding is that a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype, while the other is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; neither is corrected by the chosen substitutions.
Question 334
An overnight review of the wastewater pumping station reveals these unrelated but concurrent findings: (1) the SOC receives too many low-confidence industrial IPS matches on a fragile production segment; and (2) the security engineer must decide which severity levels are actively blocked and which are only logged. Which plan provides the needed control for each finding rather than a superficial substitute?
- Tune relevant signatures using evidence and staged monitoring before changing actions; then increase traffic logging while leaving virtual-patching severity actions unchanged
- Disable all industrial IPS inspection permanently; then increase traffic logging while leaving virtual-patching severity actions unchanged
- Disable all industrial IPS inspection permanently; then define and test the severity and action choices within a virtual patching profile
- Correlate application-control identification with IPS threat events; then define and test the severity and action choices within a virtual patching profile
- Tune relevant signatures using evidence and staged monitoring before changing actions; then define and test the severity and action choices within a virtual patching profile
Explanation
Correct Answer
E:The first control fits because narrowly targeted tuning can lower false positives without disabling unrelated protective coverage; the second fits because profile-level action and severity selections set which matched mitigations are enforced versus observed. Together they resolve the separate findings at the wastewater pumping station: the SOC receives too many low-confidence industrial IPS matches on a fragile production segment, and the security engineer must decide which severity levels are actively blocked and which are only logged. This addresses the SOC receives too many low-confidence industrial IPS matches on a fragile production segment without bypassing the separate requirement that the security engineer must decide which severity levels are actively blocked and which are only logged.
Incorrect Answers
A:The first action is suitable because narrowly targeted tuning can lower false positives without disabling unrelated protective coverage; the second is misdirected because extra visibility does not configure which virtual-patching severities should block a session. At the wastewater pumping station, the remaining second gap is that the security engineer must decide which severity levels are actively blocked and which are only logged, even though the SOC receives too many low-confidence industrial IPS matches on a fragile production segment is covered.
B:The first substitution fails because global disablement discards protection against other exploit classes along with the noisy match; the second fails because extra visibility does not configure which virtual-patching severities should block a session. For this wastewater pumping station, the first finding is that the SOC receives too many low-confidence industrial IPS matches on a fragile production segment, while the other is that the security engineer must decide which severity levels are actively blocked and which are only logged; neither is corrected by the chosen substitutions.
C:The second part is useful because profile-level action and severity selections set which matched mitigations are enforced versus observed; however, the first part fails because global disablement discards protection against other exploit classes along with the noisy match. The first gap remains unresolved at the wastewater pumping station: the SOC receives too many low-confidence industrial IPS matches on a fragile production segment; the second measure helps with the security engineer must decide which severity levels are actively blocked and which are only logged but cannot repair it.
D:The second action addresses the security engineer must decide which severity levels are actively blocked and which are only logged because profile-level action and severity selections set which matched mitigations are enforced versus observed, but the separate first finding still concerns the SOC receives too many low-confidence industrial IPS matches on a fragile production segment. The proposed first mechanism belongs to a different requirement: the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered; application detection describes the traffic type while IPS alerts indicate a matching malicious pattern, but despite the valid second control for the security engineer must decide which severity levels are actively blocked and which are only logged, it does not resolve the first finding at the wastewater pumping station: the SOC receives too many low-confidence industrial IPS matches on a fragile production segment.
Question 335
A security assessment of the battery manufacturing line records two issues: (1) the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile; and (2) a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs. Which combination addresses the required mechanisms at their proper enforcement or observation points?
- Enable only traffic logging while leaving IPS disabled; then connect a validated event handler to a controlled automation response
- Enable a suitable IPS security profile on the conduit firewall policy; then connect a validated event handler to a controlled automation response
- Enable only traffic logging while leaving IPS disabled; then rely on a monthly static report as the only response trigger
- Enable a suitable IPS security profile on the conduit firewall policy; then rely on a monthly static report as the only response trigger
Explanation
Correct Answer
B:The first control fits because the dedicated OT attack definitions are used by IPS inspection when the service is valid and policy is configured; the second fits because event-driven response can feed an approved containment action from the detection context. Together they resolve the separate findings at the battery manufacturing line: the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile, and a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs. This addresses the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile without bypassing the separate requirement that a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs.
Incorrect Answers
A:The second part is useful because event-driven response can feed an approved containment action from the detection context; however, the first part fails because recording session metadata does not cause threat signatures to be evaluated. The first gap remains unresolved at the battery manufacturing line: the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile; the second measure helps with a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs but cannot repair it.
C:The first substitution fails because recording session metadata does not cause threat signatures to be evaluated; the second fails because scheduled historical reporting does not provide event-driven containment. For this battery manufacturing line, the first finding is that the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile, while the other is that a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs; neither is corrected by the chosen substitutions.
D:The first action is suitable because the dedicated OT attack definitions are used by IPS inspection when the service is valid and policy is configured; the second is misdirected because scheduled historical reporting does not provide event-driven containment. At the battery manufacturing line, the remaining second gap is that a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs, even though the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile is covered.
Question 336
The food-processing factory needs a bounded configuration change in response to both observations: (1) a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; and (2) a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge. Which paired action most directly satisfies both findings without introducing an unrelated control change?
- Enforce a cell-to-cell allowlist at a routed or transparent segmentation boundary; then use an approved device-aware NAC exception or identity method scoped to that equipment
- Introduce internal segmentation rules on actual historian-to-PLC forwarding paths; then use an approved device-aware NAC exception or identity method scoped to that equipment
- Introduce internal segmentation rules on actual historian-to-PLC forwarding paths; then force every PLC to open a browser-based identity portal
- Inspect only traffic leaving the company for the Internet; then use an approved device-aware NAC exception or identity method scoped to that equipment
- Inspect only traffic leaving the company for the Internet; then force every PLC to open a browser-based identity portal
Explanation
Correct Answer
B:The first control fits because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; the second fits because machine endpoints often require controlled device registration and noninteractive authorization rather than user prompts. Together they resolve the separate findings at the food-processing factory: a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, and a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge. This addresses a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area without bypassing the separate requirement that a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge.
Incorrect Answers
A:The second action addresses a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge because machine endpoints often require controlled device registration and noninteractive authorization rather than user prompts, but the separate first finding still concerns a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. The proposed first mechanism belongs to a different requirement: a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell; crossing-cell policy distinguishes approved production exchanges from workstation lateral movement, but despite the valid second control for a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge, it does not resolve the first finding at the food-processing factory: a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area.
C:The first action is suitable because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; the second is misdirected because headless controllers generally cannot complete a human web login flow. At the food-processing factory, the remaining second gap is that a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge, even though a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area is covered.
D:The second part is useful because machine endpoints often require controlled device registration and noninteractive authorization rather than user prompts; however, the first part fails because external egress policy misses peer-to-peer communications within the industrial environment. The first gap remains unresolved at the food-processing factory: a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; the second measure helps with a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge but cannot repair it.
E:The first substitution fails because external egress policy misses peer-to-peer communications within the industrial environment; the second fails because headless controllers generally cannot complete a human web login flow. For this food-processing factory, the first finding is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, while the other is that a switch port hosts headless industrial equipment that cannot perform an interactive human authentication challenge; neither is corrected by the chosen substitutions.
Question 337
At an OT architecture workshop covering the cement kiln control room, the priority items are: (1) the security team must keep two production units' routing tables and firewall administration separate on shared hardware; and (2) a disabled endpoint must have substantially no operational-network access regardless of prior registration. Which paired configuration should be included in the approved OT security change?
- Authorize a source-, destination- and service-specific time-bounded firewall policy; then use the FortiNAC disabled or dead-end isolation enforcement state
- Use separate FortiGate VDOMs with appropriate inter-VDOM boundaries; then re-enable the device automatically whenever it reconnects
- Create two address objects inside one unrestricted policy set; then use the FortiNAC disabled or dead-end isolation enforcement state
- Use separate FortiGate VDOMs with appropriate inter-VDOM boundaries; then use the FortiNAC disabled or dead-end isolation enforcement state
- Create two address objects inside one unrestricted policy set; then re-enable the device automatically whenever it reconnects
Explanation
Correct Answer
D:The first control fits because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels; the second fits because a disabled host should be held in a restrictive network state instead of rejoining production. Together they resolve the separate findings at the cement kiln control room: the security team must keep two production units' routing tables and firewall administration separate on shared hardware, and a disabled endpoint must have substantially no operational-network access regardless of prior registration. This addresses the security team must keep two production units' routing tables and firewall administration separate on shared hardware without bypassing the separate requirement that a disabled endpoint must have substantially no operational-network access regardless of prior registration.
Incorrect Answers
A:The second action addresses a disabled endpoint must have substantially no operational-network access regardless of prior registration because a disabled host should be held in a restrictive network state instead of rejoining production, but the separate first finding still concerns the security team must keep two production units' routing tables and firewall administration separate on shared hardware. The proposed first mechanism belongs to a different requirement: a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task, but despite the valid second control for a disabled endpoint must have substantially no operational-network access regardless of prior registration, it does not resolve the first finding at the cement kiln control room: the security team must keep two production units' routing tables and firewall administration separate on shared hardware.
B:The first action is suitable because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels; the second is misdirected because reconnecting does not override the administrator's disabled state. At the cement kiln control room, the remaining second gap is that a disabled endpoint must have substantially no operational-network access regardless of prior registration, even though the security team must keep two production units' routing tables and firewall administration separate on shared hardware is covered.
C:The second part is useful because a disabled host should be held in a restrictive network state instead of rejoining production; however, the first part fails because address objects alone do not create separate forwarding or administrative instances. The first gap remains unresolved at the cement kiln control room: the security team must keep two production units' routing tables and firewall administration separate on shared hardware; the second measure helps with a disabled endpoint must have substantially no operational-network access regardless of prior registration but cannot repair it.
E:The first substitution fails because address objects alone do not create separate forwarding or administrative instances; the second fails because reconnecting does not override the administrator's disabled state. For this cement kiln control room, the first finding is that the security team must keep two production units' routing tables and firewall administration separate on shared hardware, while the other is that a disabled endpoint must have substantially no operational-network access regardless of prior registration; neither is corrected by the chosen substitutions.
Question 338
The pharmaceutical production floor is preparing a controlled rollout. One outstanding requirement is that a security team wants evidence related to its baseline CIS Controls implementation. What is the most targeted response?
- Interpret an antivirus signature count as a CIS compliance certificate
- Combine KEV information with asset exposure and process consequence
- Review the OT Security Risk report and validate its source data and scope
- Use the appropriate CIS Controls Security Rating report and review its underlying checks
Explanation
Correct Answer
D:At the pharmaceutical production floor, CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance; that directly resolves the requirement that a security team wants evidence related to its baseline CIS Controls implementation.
Incorrect Answers
A:At the pharmaceutical production floor, the expected mechanism is absent because update counts do not assess all of the control areas needed for a security rating; it leaves unresolved the finding that a security team wants evidence related to its baseline CIS Controls implementation.
B:At the pharmaceutical production floor, this mechanism serves the separate situation where security staff need to focus on weaknesses that are actively exploited rather than treating all listed vulnerabilities alike, whereas the present finding is that a security team wants evidence related to its baseline CIS Controls implementation; although exploitation intelligence becomes useful when tied to real device reachability and safety impact, the required capability remains missing.
C:At the pharmaceutical production floor, this mechanism serves the separate situation where the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, whereas the present finding is that a security team wants evidence related to its baseline CIS Controls implementation; although an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization, the required capability remains missing.
Question 339
During troubleshooting of the airport baggage control system, the operator confirms that a registered workstation failed its compliance policy scan but must receive only remediation access. The proposed shortcut is to treat every failed posture scan as a successful normal registration. Which alternative should the architect approve instead?
- Treat every failed posture scan as a successful normal registration
- Configure and map the restriction VLAN on the controlled switch before enforcing port changes
- Configure FortiNAC forced registration with an appropriate registration or isolation VLAN
- Apply FortiNAC forced remediation and the remediation isolation state
Explanation
Correct Answer
D:At the airport baggage control system, untrusted registered hosts can be restricted until their compliance posture is corrected; that directly resolves the requirement that a registered workstation failed its compliance policy scan but must receive only remediation access.
Incorrect Answers
A:At the airport baggage control system, the expected mechanism is absent because registration status does not mean a device still meets the required security posture; it leaves unresolved the finding that a registered workstation failed its compliance policy scan but must receive only remediation access.
B:At the airport baggage control system, this mechanism serves the separate situation where FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN, whereas the present finding is that a registered workstation failed its compliance policy scan but must receive only remediation access; although access enforcement depends on the switching infrastructure actually supporting the intended restricted VLAN, the required capability remains missing.
C:At the airport baggage control system, this mechanism serves the separate situation where an unregistered maintenance laptop should be unable to join the production VLAN until approved, whereas the present finding is that a registered workstation failed its compliance policy scan but must receive only remediation access; although unknown endpoints can be put into a restricted VLAN pending their registration and authorization, the required capability remains missing.
Question 340
At the airport baggage control system, the next change must address the fact that a power utility requires an evidence-oriented view of controls relevant to electric-sector NERC CIP oversight. What is the most targeted response?
- Submit a broad CIS Controls rating as the sole evidence of NERC CIP applicability
- Review the NERC CIP-related compliance security rating and verify applicability separately
- Use the appropriate CIS Controls Security Rating report and review its underlying checks
- Review the OT Security Risk report and validate its source data and scope
Explanation
Correct Answer
B:The relevant technical distinction for the airport baggage control system is that a rating report can guide evidence review but cannot alone establish legal NERC CIP compliance; that directly resolves the requirement that a power utility requires an evidence-oriented view of controls relevant to electric-sector NERC CIP oversight.
Incorrect Answers
A:The mismatch at the airport baggage control system is specific to the observed control requirement: a general security rating does not determine which NERC CIP requirements apply to BES Cyber Systems; it leaves unresolved the finding that a power utility requires an evidence-oriented view of controls relevant to electric-sector NERC CIP oversight.
C:At the airport baggage control system, this mechanism serves the separate situation where a security team wants evidence related to its baseline CIS Controls implementation, whereas the present finding is that a power utility requires an evidence-oriented view of controls relevant to electric-sector NERC CIP oversight; although CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance, the required capability remains missing.
D:At the airport baggage control system, this mechanism serves the separate situation where the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, whereas the present finding is that a power utility requires an evidence-oriented view of controls relevant to electric-sector NERC CIP oversight; although an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization, the required capability remains missing.