Question 410
The design authority for the cold-storage automation plant reports this gap: a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild. What is the most targeted response?
- Review the KEV indicators associated with the discovered asset vulnerability
- Rank vulnerabilities by a generic severity score without examining KEV status
- Check the Operational Technology Security Service entitlement under FortiGuard subscriptions
- Correlate the observed identity, MAC and network-attachment data before assigning asset roles
Explanation
Correct Answer
A:At the cold-storage automation plant, known-exploited-vulnerability context differentiates observed exploitation relevance from an undifferentiated list of weaknesses; that directly resolves the requirement that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild.
Incorrect Answers
B:At the cold-storage automation plant, the expected mechanism is absent because severity-only ordering omits the exploited-in-the-wild evidence explicitly required by the analyst; it leaves unresolved the finding that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild.
C:At the cold-storage automation plant, this mechanism serves the separate situation where the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures, whereas the present finding is that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild; although license entitlement governs access to the dedicated OT security signature updates, the required capability remains missing.
D:At the cold-storage automation plant, this mechanism serves the separate situation where the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports, whereas the present finding is that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild; although cross-checking stable and transient identifiers helps avoid attributing a device to the wrong machine, the required capability remains missing.
Question 411
An industrial network audit at the food-processing factory establishes two requirements: (1) a site wants independent policy administration and traffic isolation for separate industrial tenants on the same FortiGate; and (2) the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws. What is the technically justified combination for the two separate observations?
- Put different sites into one unrestricted default policy; then confirm device identification and necessary security-profile processing for IoT/OT visibility
- Evaluate virtual domains with separate routing and policy contexts; then disable all UTM processing while expecting the same enrichment
- Evaluate virtual domains with separate routing and policy contexts; then confirm device identification and necessary security-profile processing for IoT/OT visibility
- Put different sites into one unrestricted default policy; then disable all UTM processing while expecting the same enrichment
Explanation
Correct Answer
C:The first control fits because VDOMs provide logical separation of firewall configuration and forwarding contexts on a shared FortiGate; the second fits because device identity processing and relevant inspected traffic supply asset attributes that enable enriched vulnerability views. Together they resolve the separate findings at the food-processing factory: a site wants independent policy administration and traffic isolation for separate industrial tenants on the same FortiGate, and the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws. This addresses a site wants independent policy administration and traffic isolation for separate industrial tenants on the same FortiGate without bypassing the separate requirement that the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws.
Incorrect Answers
A:The second part is useful because device identity processing and relevant inspected traffic supply asset attributes that enable enriched vulnerability views; however, the first part fails because a shared broad rule does not create independent administration or routing contexts. The first gap remains unresolved at the food-processing factory: a site wants independent policy administration and traffic isolation for separate industrial tenants on the same FortiGate; the second measure helps with the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws but cannot repair it.
B:The first action is suitable because VDOMs provide logical separation of firewall configuration and forwarding contexts on a shared FortiGate; the second is misdirected because disabling inspection can remove observations needed to associate assets with vulnerability information. At the food-processing factory, the remaining second gap is that the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws, even though a site wants independent policy administration and traffic isolation for separate industrial tenants on the same FortiGate is covered.
D:The first substitution fails because a shared broad rule does not create independent administration or routing contexts; the second fails because disabling inspection can remove observations needed to associate assets with vulnerability information. For this food-processing factory, the first finding is that a site wants independent policy administration and traffic isolation for separate industrial tenants on the same FortiGate, while the other is that the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws; neither is corrected by the chosen substitutions.
Question 412
The plant cybersecurity team at the food-processing factory has two narrowly scoped objectives: (1) firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; and (2) FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN. Which combination addresses the required mechanisms at their proper enforcement or observation points?
- Apply identity-aware firewall rules using the authenticated user group; then configure and map the restriction VLAN on the controlled switch before enforcing port changes
- Authorize every source address in the engineering LAN without authentication; then configure and map the restriction VLAN on the controlled switch before enforcing port changes
- Authorize every source address in the engineering LAN without authentication; then enable an unrelated email alert while leaving the switch VLAN missing
- Apply identity-aware firewall rules using the authenticated user group; then enable an unrelated email alert while leaving the switch VLAN missing
Explanation
Correct Answer
A:The first control fits because group-scoped authorization links a verified human identity to the permitted network session; the second fits because access enforcement depends on the switching infrastructure actually supporting the intended restricted VLAN. Together they resolve the separate findings at the food-processing factory: firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, and FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN. This addresses firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet without bypassing the separate requirement that FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN.
Incorrect Answers
B:The second part is useful because access enforcement depends on the switching infrastructure actually supporting the intended restricted VLAN; however, the first part fails because host subnet membership does not prove the user's membership in the maintenance role. The first gap remains unresolved at the food-processing factory: firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; the second measure helps with FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN but cannot repair it.
C:The first substitution fails because host subnet membership does not prove the user's membership in the maintenance role; the second fails because notification does not supply a usable layer-two quarantine destination. For this food-processing factory, the first finding is that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, while the other is that FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN; neither is corrected by the chosen substitutions.
D:The first action is suitable because group-scoped authorization links a verified human identity to the permitted network session; the second is misdirected because notification does not supply a usable layer-two quarantine destination. At the food-processing factory, the remaining second gap is that FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN, even though firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet is covered.
Question 413
For the upcoming controlled rollout at the port container terminal, the work package includes: (1) a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; and (2) IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. Which joint design is aligned with the exact detection and enforcement gaps?
- Rename the unused application sensor in the object list; then expose IEC 104 services to any routable corporate address
- Apply the sensor to the actual matching firewall policy and confirm policy hits; then expose IEC 104 services to any routable corporate address
- Rename the unused application sensor in the object list; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
- Apply the sensor to the actual matching firewall policy and confirm policy hits; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
Explanation
Correct Answer
D:The first control fits because security profiles act on traffic traversing the enabled policy, not merely on the profile object existing; the second fits because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface. Together they resolve the separate findings at the port container terminal: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule, and IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. This addresses a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule without bypassing the separate requirement that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries.
Incorrect Answers
A:The first substitution fails because naming an unattached profile does not inspect the sessions reaching the plant; the second fails because broad routed availability violates the small set of approved SCADA relationships. For this port container terminal, the first finding is that a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule, while the other is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries; neither is corrected by the chosen substitutions.
B:The first action is suitable because security profiles act on traffic traversing the enabled policy, not merely on the profile object existing; the second is misdirected because broad routed availability violates the small set of approved SCADA relationships. At the port container terminal, the remaining second gap is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, even though a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule is covered.
C:The second part is useful because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface; however, the first part fails because naming an unattached profile does not inspect the sessions reaching the plant. The first gap remains unresolved at the port container terminal: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; the second measure helps with IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries but cannot repair it.
Question 414
A technician reviewing security evidence from the industrial refrigeration installation finds that analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule. What is the most targeted response?
- Introduce internal segmentation rules on actual historian-to-PLC forwarding paths
- Use separate FortiGate VDOMs with appropriate inter-VDOM boundaries
- Enable more logging on the narrow rule while leaving the higher matching policy in place
- Examine policy order and actual policy-hit or traffic logs
Explanation
Correct Answer
D:For the stated gap at the industrial refrigeration installation, FortiGate evaluates the applicable policy and a preceding broad match can shadow a narrow intended rule; that directly resolves the requirement that analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule.
Incorrect Answers
A:At the industrial refrigeration installation, this mechanism serves the separate situation where a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, whereas the present finding is that analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule; although restricting east-west flows contains lateral movement that perimeter-only inspection would not see, the required capability remains missing.
B:At the industrial refrigeration installation, this mechanism serves the separate situation where the security team must keep two production units' routing tables and firewall administration separate on shared hardware, whereas the present finding is that analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule; although VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels, the required capability remains missing.
C:At the industrial refrigeration installation, that alternative is insufficient because extra logging on a shadowed rule does not make traffic select that rule ahead of an earlier match; it leaves unresolved the finding that analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule.
Question 415
The technical reviewer for the offshore pumping platform must select controls for these two findings: (1) a ring-topology automation network has stringent recovery-time requirements before a segmentation change; and (2) users on registered workstations need to authenticate before the access port returns to a production VLAN. Which two measures correctly map to the operational and security requirements?
- Validate the industrial redundancy mechanism and the firewall failure behavior together; then use FortiNAC forced authentication on the relevant ports
- Assume any second Ethernet cable guarantees hitless recovery; then substitute MAC registration as proof of the current human user
- Measure latency and failover effects in a representative OT test before introducing inline enforcement; then use FortiNAC forced authentication on the relevant ports
- Assume any second Ethernet cable guarantees hitless recovery; then use FortiNAC forced authentication on the relevant ports
- Validate the industrial redundancy mechanism and the firewall failure behavior together; then configure and map the restriction VLAN on the controlled switch before enforcing port changes
- Validate the industrial redundancy mechanism and the firewall failure behavior together; then substitute MAC registration as proof of the current human user
Explanation
Correct Answer
A:The first control fits because acceptable availability depends on convergence and failover characteristics of the whole industrial path; the second fits because the isolated state can persist until a verified user authenticates to release the port. Together they resolve the separate findings at the offshore pumping platform: a ring-topology automation network has stringent recovery-time requirements before a segmentation change, and users on registered workstations need to authenticate before the access port returns to a production VLAN. This addresses a ring-topology automation network has stringent recovery-time requirements before a segmentation change without bypassing the separate requirement that users on registered workstations need to authenticate before the access port returns to a production VLAN.
Incorrect Answers
B:The first substitution fails because physical duplication alone does not configure ring recovery or state continuity; the second fails because a registered device does not establish which individual is logged on. For this offshore pumping platform, the first finding is that a ring-topology automation network has stringent recovery-time requirements before a segmentation change, while the other is that users on registered workstations need to authenticate before the access port returns to a production VLAN; neither is corrected by the chosen substitutions.
C:The second action addresses users on registered workstations need to authenticate before the access port returns to a production VLAN because the isolated state can persist until a verified user authenticates to release the port, but the separate first finding still concerns a ring-topology automation network has stringent recovery-time requirements before a segmentation change. The proposed first mechanism belongs to a different requirement: a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop; control-loop timing and deterministic availability must be assessed when changing industrial Ethernet forwarding, but despite the valid second control for users on registered workstations need to authenticate before the access port returns to a production VLAN, it does not resolve the first finding at the offshore pumping platform: a ring-topology automation network has stringent recovery-time requirements before a segmentation change.
D:The second part is useful because the isolated state can persist until a verified user authenticates to release the port; however, the first part fails because physical duplication alone does not configure ring recovery or state continuity. The first gap remains unresolved at the offshore pumping platform: a ring-topology automation network has stringent recovery-time requirements before a segmentation change; the second measure helps with users on registered workstations need to authenticate before the access port returns to a production VLAN but cannot repair it.
E:The first control responds to a ring-topology automation network has stringent recovery-time requirements before a segmentation change because acceptable availability depends on convergence and failover characteristics of the whole industrial path, but the separate second finding still concerns users on registered workstations need to authenticate before the access port returns to a production VLAN. The second measure targets a different requirement: FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN; access enforcement depends on the switching infrastructure actually supporting the intended restricted VLAN, whereas the current second finding is that users on registered workstations need to authenticate before the access port returns to a production VLAN, with the different first requirement being a ring-topology automation network has stringent recovery-time requirements before a segmentation change.
F:The first action is suitable because acceptable availability depends on convergence and failover characteristics of the whole industrial path; the second is misdirected because a registered device does not establish which individual is logged on. At the offshore pumping platform, the remaining second gap is that users on registered workstations need to authenticate before the access port returns to a production VLAN, even though a ring-topology automation network has stringent recovery-time requirements before a segmentation change is covered.
Question 416
For the upcoming controlled rollout at the airport baggage control system, the work package includes: (1) the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443; and (2) a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete. Which combination addresses the required mechanisms at their proper enforcement or observation points?
- Define zone-specific security requirements and assess the conduits connecting them; then plan a supported third-party OT discovery integration with verified field mapping
- Declare the entire production LAN compliant because it has a perimeter firewall; then plan a supported third-party OT discovery integration with verified field mapping
- Declare the entire production LAN compliant because it has a perimeter firewall; then authorize unverified imported device labels as trusted production roles
- Map the plant's functions to the Purdue model before defining security boundaries; then plan a supported third-party OT discovery integration with verified field mapping
- Define zone-specific security requirements and assess the conduits connecting them; then authorize unverified imported device labels as trusted production roles
Explanation
Correct Answer
A:The first control fits because ISA/IEC 62443 promotes risk-informed partitioning and explicitly governed communications across trust boundaries; the second fits because external industrial visibility can enrich asset classification when integration and trust boundaries are validated. Together they resolve the separate findings at the airport baggage control system: the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443, and a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete. This addresses the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443 without bypassing the separate requirement that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete.
Incorrect Answers
B:The second part is useful because external industrial visibility can enrich asset classification when integration and trust boundaries are validated; however, the first part fails because one perimeter device cannot demonstrate zone-level requirements or govern all lateral paths. The first gap remains unresolved at the airport baggage control system: the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443; the second measure helps with a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete but cannot repair it.
C:The first substitution fails because one perimeter device cannot demonstrate zone-level requirements or govern all lateral paths; the second fails because asset metadata alone cannot prove the live endpoint is authorized to enter a production access role. For this airport baggage control system, the first finding is that the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443, while the other is that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete; neither is corrected by the chosen substitutions.
D:The second action addresses a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete because external industrial visibility can enrich asset classification when integration and trust boundaries are validated, but the separate first finding still concerns the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443. The proposed first mechanism belongs to a different requirement: the team cannot distinguish enterprise operations, the industrial DMZ, site operations and direct control layers in its reference architecture; a Purdue mapping separates enterprise, site operations and process-control levels so boundary controls can be placed deliberately, but despite the valid second control for a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete, it does not resolve the first finding at the airport baggage control system: the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443.
E:The first action is suitable because ISA/IEC 62443 promotes risk-informed partitioning and explicitly governed communications across trust boundaries; the second is misdirected because asset metadata alone cannot prove the live endpoint is authorized to enter a production access role. At the airport baggage control system, the remaining second gap is that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete, even though the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443 is covered.
Question 417
Before exposing an OT interconnection at the pharmaceutical production floor, the design must resolve both findings: (1) a ring-topology automation network has stringent recovery-time requirements before a segmentation change; and (2) the security team must keep two production units' routing tables and firewall administration separate on shared hardware. Which plan provides the needed control for each finding rather than a superficial substitute?
- Assume any second Ethernet cable guarantees hitless recovery; then create two address objects inside one unrestricted policy set
- Validate the industrial redundancy mechanism and the firewall failure behavior together; then create two address objects inside one unrestricted policy set
- Validate the industrial redundancy mechanism and the firewall failure behavior together; then use separate FortiGate VDOMs with appropriate inter-VDOM boundaries
- Assume any second Ethernet cable guarantees hitless recovery; then use separate FortiGate VDOMs with appropriate inter-VDOM boundaries
- Measure latency and failover effects in a representative OT test before introducing inline enforcement; then use separate FortiGate VDOMs with appropriate inter-VDOM boundaries
Explanation
Correct Answer
C:The first control fits because acceptable availability depends on convergence and failover characteristics of the whole industrial path; the second fits because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels. Together they resolve the separate findings at the pharmaceutical production floor: a ring-topology automation network has stringent recovery-time requirements before a segmentation change, and the security team must keep two production units' routing tables and firewall administration separate on shared hardware. This addresses a ring-topology automation network has stringent recovery-time requirements before a segmentation change without bypassing the separate requirement that the security team must keep two production units' routing tables and firewall administration separate on shared hardware.
Incorrect Answers
A:The first substitution fails because physical duplication alone does not configure ring recovery or state continuity; the second fails because address objects alone do not create separate forwarding or administrative instances. For this pharmaceutical production floor, the first finding is that a ring-topology automation network has stringent recovery-time requirements before a segmentation change, while the other is that the security team must keep two production units' routing tables and firewall administration separate on shared hardware; neither is corrected by the chosen substitutions.
B:The first action is suitable because acceptable availability depends on convergence and failover characteristics of the whole industrial path; the second is misdirected because address objects alone do not create separate forwarding or administrative instances. At the pharmaceutical production floor, the remaining second gap is that the security team must keep two production units' routing tables and firewall administration separate on shared hardware, even though a ring-topology automation network has stringent recovery-time requirements before a segmentation change is covered.
D:The second part is useful because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels; however, the first part fails because physical duplication alone does not configure ring recovery or state continuity. The first gap remains unresolved at the pharmaceutical production floor: a ring-topology automation network has stringent recovery-time requirements before a segmentation change; the second measure helps with the security team must keep two production units' routing tables and firewall administration separate on shared hardware but cannot repair it.
E:The second action addresses the security team must keep two production units' routing tables and firewall administration separate on shared hardware because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels, but the separate first finding still concerns a ring-topology automation network has stringent recovery-time requirements before a segmentation change. The proposed first mechanism belongs to a different requirement: a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop; control-loop timing and deterministic availability must be assessed when changing industrial Ethernet forwarding, but despite the valid second control for the security team must keep two production units' routing tables and firewall administration separate on shared hardware, it does not resolve the first finding at the pharmaceutical production floor: a ring-topology automation network has stringent recovery-time requirements before a segmentation change.
Question 418
The technical reviewer for the hydroelectric generation site must select controls for these two findings: (1) a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; and (2) remote engineers must prove a second factor before accessing a restricted OT management service. Which combination addresses the required mechanisms at their proper enforcement or observation points?
- Allow the whole technician VLAN to connect to all controllers permanently; then require supported multi-factor authentication for the administrative sign-in
- Authorize a source-, destination- and service-specific time-bounded firewall policy; then require supported multi-factor authentication for the administrative sign-in
- Authorize a source-, destination- and service-specific time-bounded firewall policy; then depend solely on knowledge of the engineer's IP address
- Allow the whole technician VLAN to connect to all controllers permanently; then depend solely on knowledge of the engineer's IP address
Explanation
Correct Answer
B:The first control fits because narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task; the second fits because a second independent authentication factor reduces reliance on a stolen password for human access. Together they resolve the separate findings at the hydroelectric generation site: a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet, and remote engineers must prove a second factor before accessing a restricted OT management service. This addresses a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet without bypassing the separate requirement that remote engineers must prove a second factor before accessing a restricted OT management service.
Incorrect Answers
A:The second part is useful because a second independent authentication factor reduces reliance on a stolen password for human access; however, the first part fails because indefinite subnet-wide access exceeds the stated one-device maintenance requirement. The first gap remains unresolved at the hydroelectric generation site: a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; the second measure helps with remote engineers must prove a second factor before accessing a restricted OT management service but cannot repair it.
C:The first action is suitable because narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task; the second is misdirected because network origin is neither an individual identity proof nor a second factor. At the hydroelectric generation site, the remaining second gap is that remote engineers must prove a second factor before accessing a restricted OT management service, even though a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet is covered.
D:The first substitution fails because indefinite subnet-wide access exceeds the stated one-device maintenance requirement; the second fails because network origin is neither an individual identity proof nor a second factor. For this hydroelectric generation site, the first finding is that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet, while the other is that remote engineers must prove a second factor before accessing a restricted OT management service; neither is corrected by the chosen substitutions.
Question 419
During an OT readiness check at the wastewater pumping station, a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell. The proposed shortcut is to assume a perimeter Internet firewall sees every cell-to-cell packet. Which alternative should the architect approve instead?
- Use a controlled remote-access termination and a monitored jump host into permitted OT destinations
- Enforce a cell-to-cell allowlist at a routed or transparent segmentation boundary
- Assume a perimeter Internet firewall sees every cell-to-cell packet
- Restrict the approved traffic at the correct conduit using protocol-aware controls where available
Explanation
Correct Answer
B:For the stated gap at the wastewater pumping station, crossing-cell policy distinguishes approved production exchanges from workstation lateral movement; that directly resolves the requirement that a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell.
Incorrect Answers
A:At the wastewater pumping station, this mechanism serves the separate situation where a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, whereas the present finding is that a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell; although brokered privileged access reduces direct exposure and supports session accountability, the required capability remains missing.
C:At the wastewater pumping station, that alternative is insufficient because internal switches may forward the lateral exchange without crossing the external perimeter; it leaves unresolved the finding that a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell.
D:At the wastewater pumping station, this mechanism serves the separate situation where the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited, whereas the present finding is that a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell; although limiting communications by destination and industrial operation reduces the blast radius of unauthorized commands, the required capability remains missing.
Question 420
An audit at the district heating plant finds that the security team must keep two production units' routing tables and firewall administration separate on shared hardware. The proposed shortcut is to create two address objects inside one unrestricted policy set. Which alternative should the architect approve instead?
- Authorize a source-, destination- and service-specific time-bounded firewall policy
- Route enterprise-to-OT administration through a segmented industrial DMZ
- Create two address objects inside one unrestricted policy set
- Use separate FortiGate VDOMs with appropriate inter-VDOM boundaries
Explanation
Correct Answer
D:In this district heating plant scenario, VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels; that directly resolves the requirement that the security team must keep two production units' routing tables and firewall administration separate on shared hardware.
Incorrect Answers
A:At the district heating plant, this mechanism serves the separate situation where a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet, whereas the present finding is that the security team must keep two production units' routing tables and firewall administration separate on shared hardware; although narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task, the required capability remains missing.
B:At the district heating plant, this mechanism serves the separate situation where enterprise workstations can reach process controllers directly without traversing an approved industrial DMZ, whereas the present finding is that the security team must keep two production units' routing tables and firewall administration separate on shared hardware; although a controlled intermediary zone limits direct trust between enterprise assets and process-control equipment, the required capability remains missing.
C:At the district heating plant, this substitutes a measure addressing a different concern: address objects alone do not create separate forwarding or administrative instances; it leaves unresolved the finding that the security team must keep two production units' routing tables and firewall administration separate on shared hardware.