Fortinet NSE6_OTS_AR-7.6 (Fortinet NSE 6 - OT Security 7.6 Architect) Practice Test 48

Question 470

During troubleshooting of the automotive assembly line, the operator confirms that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet. What is the most targeted response?

  1. Authorize a source-, destination- and service-specific time-bounded firewall policy
  2. Use a controlled remote-access termination and a monitored jump host into permitted OT destinations
  3. Keep cell-specific forwarding contexts logically isolated and define explicit interconnections
  4. Allow the whole technician VLAN to connect to all controllers permanently

Explanation

Correct Answer

A:

For the stated gap at the automotive assembly line, narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task; that directly resolves the requirement that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet.

Incorrect Answers

B:

At the automotive assembly line, this mechanism serves the separate situation where a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, whereas the present finding is that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; although brokered privileged access reduces direct exposure and supports session accountability, the required capability remains missing.

C:

At the automotive assembly line, this mechanism serves the separate situation where multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks, whereas the present finding is that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; although separate routing contexts prevent accidental overlap while making required shared services deliberate, the required capability remains missing.

D:

At the automotive assembly line, that alternative is insufficient because indefinite subnet-wide access exceeds the stated one-device maintenance requirement; it leaves unresolved the finding that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet.

Question 471

A targeted security validation of the food-processing factory specifies the following: (1) the OT team cannot tell which industrial asset provided the source IP of a detected threat; and (2) the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures. Which paired configuration should be included in the approved OT security change?

  1. Associate firewall events with resolved device identity and asset attributes; then check the Operational Technology Security Service entitlement under FortiGuard subscriptions
  2. Remove source identity fields from the SIEM ingest pipeline; then check the Operational Technology Security Service entitlement under FortiGuard subscriptions
  3. Remove source identity fields from the SIEM ingest pipeline; then assume a default route alone proves OT signature licensing
  4. Associate firewall events with resolved device identity and asset attributes; then assume a default route alone proves OT signature licensing
  5. Integrate Fortinet Security Fabric telemetry and inventory across the OT boundary; then check the Operational Technology Security Service entitlement under FortiGuard subscriptions

Explanation

Correct Answer

A:

The first control fits because enriched asset-to-IP associations make events actionable for specific controllers instead of only transient addresses; the second fits because license entitlement governs access to the dedicated OT security signature updates. Together they resolve the separate findings at the food-processing factory: the OT team cannot tell which industrial asset provided the source IP of a detected threat, and the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures. This addresses the OT team cannot tell which industrial asset provided the source IP of a detected threat without bypassing the separate requirement that the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures.

Incorrect Answers

B:

The second part is useful because license entitlement governs access to the dedicated OT security signature updates; however, the first part fails because discarding device identity prevents analysts from relating alerts to the affected industrial asset. The first gap remains unresolved at the food-processing factory: the OT team cannot tell which industrial asset provided the source IP of a detected threat; the second measure helps with the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures but cannot repair it.

C:

The first substitution fails because discarding device identity prevents analysts from relating alerts to the affected industrial asset; the second fails because Internet reachability by itself does not activate a subscription that has not been licensed. For this food-processing factory, the first finding is that the OT team cannot tell which industrial asset provided the source IP of a detected threat, while the other is that the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures; neither is corrected by the chosen substitutions.

D:

The first action is suitable because enriched asset-to-IP associations make events actionable for specific controllers instead of only transient addresses; the second is misdirected because Internet reachability by itself does not activate a subscription that has not been licensed. At the food-processing factory, the remaining second gap is that the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures, even though the OT team cannot tell which industrial asset provided the source IP of a detected threat is covered.

E:

The second action addresses the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures because license entitlement governs access to the dedicated OT security signature updates, but the separate first finding still concerns the OT team cannot tell which industrial asset provided the source IP of a detected threat. The proposed first mechanism belongs to a different requirement: multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data; correlation of FortiGate enforcement, device identity and analytics observations supports a coordinated OT security view, but despite the valid second control for the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures, it does not resolve the first finding at the food-processing factory: the OT team cannot tell which industrial asset provided the source IP of a detected threat.

Question 472

The pharmaceutical production floor is preparing a controlled rollout. One outstanding requirement is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent. What is the most targeted response?

  1. Refine FortiNAC profiling rules with additional observed attributes and higher-specificity criteria
  2. Maintain the endpoint in FortiNAC Host View with appropriate user association
  3. Investigate missing profiling attributes before changing the classification
  4. Mark the device trusted only because its fingerprint is missing

Explanation

Correct Answer

C:

At the pharmaceutical production floor, a missing-data profiling event means the rule lacks evidence for a meaningful comparison; that directly resolves the requirement that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent.

Incorrect Answers

A:

At the pharmaceutical production floor, this mechanism serves the separate situation where device classification based only on vendor OUI confuses similar products from the same manufacturer, whereas the present finding is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent; although the MAC vendor prefix is only a partial clue and stronger profile criteria reduce false classifications, the required capability remains missing.

B:

At the pharmaceutical production floor, this mechanism serves the separate situation where the plant must preserve the identity and connection history of a registered technician workstation for access investigations, whereas the present finding is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent; although Host View preserves host and connection context needed for accountability and access workflows, the required capability remains missing.

D:

At the pharmaceutical production floor, the expected mechanism is absent because absence of evidence is not a reliable basis for moving a rogue into a production segment; it leaves unresolved the finding that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent.

Question 473

During an OT readiness check at the food-processing factory, a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller. The proposed shortcut is to install an endpoint detection agent on the unsupported controller firmware. Which alternative should the architect approve instead?

  1. Examine both firewall traffic action logs and security-profile event details
  2. Deploy network-based IPS or virtual patch protection at the applicable segment boundary
  3. Change the relevant signature action under a tested IPS profile and policy
  4. Install an endpoint detection agent on the unsupported controller firmware

Explanation

Correct Answer

B:

For the stated gap at the food-processing factory, inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched; that directly resolves the requirement that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller.

Incorrect Answers

A:

At the food-processing factory, this mechanism serves the separate situation where investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile, whereas the present finding is that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; although session policy decisions and IPS or application detections are different observations requiring correlation, the required capability remains missing.

C:

At the food-processing factory, this mechanism serves the separate situation where an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature, whereas the present finding is that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; although alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path, the required capability remains missing.

D:

At the food-processing factory, that alternative is insufficient because a legacy PLC may not run a general-purpose endpoint agent and this is not a practical network control; it leaves unresolved the finding that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller.

Question 474

Following a joint IT/OT risk review at the cold-storage automation plant, two required changes emerge: (1) the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs; and (2) the production VLAN should change according to the registered host's assigned industrial role. Which paired action most directly satisfies both findings without introducing an unrelated control change?

  1. Keep cell-specific forwarding contexts logically isolated and define explicit interconnections; then apply FortiNAC role-based network access or matching network access policies
  2. Add explicit inter-VLAN firewall policy at the routing boundary; then assign every registered host to the same unrestricted VLAN
  3. Create more descriptive VLAN names and keep the router unrestricted; then apply FortiNAC role-based network access or matching network access policies
  4. Create more descriptive VLAN names and keep the router unrestricted; then assign every registered host to the same unrestricted VLAN
  5. Add explicit inter-VLAN firewall policy at the routing boundary; then apply FortiNAC role-based network access or matching network access policies

Explanation

Correct Answer

E:

The first control fits because separate layer-two membership does not automatically prevent routed communication through an allowed path; the second fits because the device or host role can drive the resulting VLAN instead of a single shared access state. Together they resolve the separate findings at the cold-storage automation plant: the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs, and the production VLAN should change according to the registered host's assigned industrial role. This addresses the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs without bypassing the separate requirement that the production VLAN should change according to the registered host's assigned industrial role.

Incorrect Answers

A:

The second action addresses the production VLAN should change according to the registered host's assigned industrial role because the device or host role can drive the resulting VLAN instead of a single shared access state, but the separate first finding still concerns the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs. The proposed first mechanism belongs to a different requirement: multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks; separate routing contexts prevent accidental overlap while making required shared services deliberate, but despite the valid second control for the production VLAN should change according to the registered host's assigned industrial role, it does not resolve the first finding at the cold-storage automation plant: the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs.

B:

The first action is suitable because separate layer-two membership does not automatically prevent routed communication through an allowed path; the second is misdirected because indiscriminate placement ignores differences between contractor, HMI and controller privileges. At the cold-storage automation plant, the remaining second gap is that the production VLAN should change according to the registered host's assigned industrial role, even though the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs is covered.

C:

The second part is useful because the device or host role can drive the resulting VLAN instead of a single shared access state; however, the first part fails because naming network segments changes no layer-three authorization decisions. The first gap remains unresolved at the cold-storage automation plant: the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs; the second measure helps with the production VLAN should change according to the registered host's assigned industrial role but cannot repair it.

D:

The first substitution fails because naming network segments changes no layer-three authorization decisions; the second fails because indiscriminate placement ignores differences between contractor, HMI and controller privileges. For this cold-storage automation plant, the first finding is that the OT VLAN design is complete but traffic can still traverse a permissive routed interface between the VLANs, while the other is that the production VLAN should change according to the registered host's assigned industrial role; neither is corrected by the chosen substitutions.

Question 475

An overnight review of the wastewater pumping station reveals these unrelated but concurrent findings: (1) an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature; and (2) the facility is air-gapped and cannot reach FortiGuard update servers directly. Which combination addresses the required mechanisms at their proper enforcement or observation points?

  1. Change the relevant signature action under a tested IPS profile and policy; then open unrestricted Internet access from all controllers for signature downloads
  2. Change the relevant signature action under a tested IPS profile and policy; then use supported manual licensing and security package transfer procedures for the offline FortiGate
  3. Change the report title from alert to blocked; then use supported manual licensing and security package transfer procedures for the offline FortiGate
  4. Change the report title from alert to blocked; then open unrestricted Internet access from all controllers for signature downloads

Explanation

Correct Answer

B:

The first control fits because alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path; the second fits because an air-gap deployment needs a controlled update transfer rather than assuming live FortiGuard queries. Together they resolve the separate findings at the wastewater pumping station: an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature, and the facility is air-gapped and cannot reach FortiGuard update servers directly. This addresses an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature without bypassing the separate requirement that the facility is air-gapped and cannot reach FortiGuard update servers directly.

Incorrect Answers

A:

The first action is suitable because alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path; the second is misdirected because exposing process devices violates the air-gap requirement and is not required for controlled package updates. At the wastewater pumping station, the remaining second gap is that the facility is air-gapped and cannot reach FortiGuard update servers directly, even though an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature is covered.

C:

The second part is useful because an air-gap deployment needs a controlled update transfer rather than assuming live FortiGuard queries; however, the first part fails because a display label cannot turn a logging-only IPS action into enforcement. The first gap remains unresolved at the wastewater pumping station: an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature; the second measure helps with the facility is air-gapped and cannot reach FortiGuard update servers directly but cannot repair it.

D:

The first substitution fails because a display label cannot turn a logging-only IPS action into enforcement; the second fails because exposing process devices violates the air-gap requirement and is not required for controlled package updates. For this wastewater pumping station, the first finding is that an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature, while the other is that the facility is air-gapped and cannot reach FortiGuard update servers directly; neither is corrected by the chosen substitutions.

Question 476

During a maintenance-window design exercise for the food-processing factory, the team notes: (1) a security team wants evidence related to its baseline CIS Controls implementation; and (2) managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. Which proposal fixes both issues while leaving unrelated OT workloads alone?

  1. Review the OT Security Risk report and validate its source data and scope; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  2. Interpret an antivirus signature count as a CIS compliance certificate; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  3. Interpret an antivirus signature count as a CIS compliance certificate; then export the firewall's unfiltered current session table once
  4. Use the appropriate CIS Controls Security Rating report and review its underlying checks; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  5. Use the appropriate CIS Controls Security Rating report and review its underlying checks; then export the firewall's unfiltered current session table once

Explanation

Correct Answer

D:

The first control fits because CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance; the second fits because reports aggregate retained security data into a repeatable operational review artifact. Together they resolve the separate findings at the food-processing factory: a security team wants evidence related to its baseline CIS Controls implementation, and managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. This addresses a security team wants evidence related to its baseline CIS Controls implementation without bypassing the separate requirement that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs.

Incorrect Answers

A:

The second action addresses managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs because reports aggregate retained security data into a repeatable operational review artifact, but the separate first finding still concerns a security team wants evidence related to its baseline CIS Controls implementation. The proposed first mechanism belongs to a different requirement: the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization, but despite the valid second control for managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs, it does not resolve the first finding at the food-processing factory: a security team wants evidence related to its baseline CIS Controls implementation.

B:

The second part is useful because reports aggregate retained security data into a repeatable operational review artifact; however, the first part fails because update counts do not assess all of the control areas needed for a security rating. The first gap remains unresolved at the food-processing factory: a security team wants evidence related to its baseline CIS Controls implementation; the second measure helps with managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs but cannot repair it.

C:

The first substitution fails because update counts do not assess all of the control areas needed for a security rating; the second fails because a one-time active-session snapshot is not a historical threat trend report. For this food-processing factory, the first finding is that a security team wants evidence related to its baseline CIS Controls implementation, while the other is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs; neither is corrected by the chosen substitutions.

E:

The first action is suitable because CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance; the second is misdirected because a one-time active-session snapshot is not a historical threat trend report. At the food-processing factory, the remaining second gap is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs, even though a security team wants evidence related to its baseline CIS Controls implementation is covered.

Question 477

A technician reviewing security evidence from the rail signaling depot finds that a registered workstation failed its compliance policy scan but must receive only remediation access. What is the most targeted response?

  1. Apply FortiNAC forced remediation and the remediation isolation state
  2. Configure FortiNAC forced registration with an appropriate registration or isolation VLAN
  3. Configure and map the restriction VLAN on the controlled switch before enforcing port changes
  4. Treat every failed posture scan as a successful normal registration

Explanation

Correct Answer

A:

For the stated gap at the rail signaling depot, untrusted registered hosts can be restricted until their compliance posture is corrected; that directly resolves the requirement that a registered workstation failed its compliance policy scan but must receive only remediation access.

Incorrect Answers

B:

At the rail signaling depot, this mechanism serves the separate situation where an unregistered maintenance laptop should be unable to join the production VLAN until approved, whereas the present finding is that a registered workstation failed its compliance policy scan but must receive only remediation access; although unknown endpoints can be put into a restricted VLAN pending their registration and authorization, the required capability remains missing.

C:

At the rail signaling depot, this mechanism serves the separate situation where FortiNAC has identified a rogue device but the managed switch is not configured for the relevant isolation VLAN, whereas the present finding is that a registered workstation failed its compliance policy scan but must receive only remediation access; although access enforcement depends on the switching infrastructure actually supporting the intended restricted VLAN, the required capability remains missing.

D:

At the rail signaling depot, that alternative is insufficient because registration status does not mean a device still meets the required security posture; it leaves unresolved the finding that a registered workstation failed its compliance policy scan but must receive only remediation access.

Question 478

A technician reviewing security evidence from the rail signaling depot finds that multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks. The proposed shortcut is to bridge the overlapping cell VLANs into one common broadcast domain. Which alternative should the architect approve instead?

  1. Keep cell-specific forwarding contexts logically isolated and define explicit interconnections
  2. Bridge the overlapping cell VLANs into one common broadcast domain
  3. Design and test appropriate FortiGate high availability for the conduit
  4. Restrict the approved traffic at the correct conduit using protocol-aware controls where available

Explanation

Correct Answer

A:

At the rail signaling depot, separate routing contexts prevent accidental overlap while making required shared services deliberate; that directly resolves the requirement that multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks.

Incorrect Answers

B:

At the rail signaling depot, the expected mechanism is absent because merging duplicate addresses produces reachability ambiguity and uncontrolled lateral communication; it leaves unresolved the finding that multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks.

C:

At the rail signaling depot, this mechanism serves the separate situation where a firewall pair protects an essential plant conduit and a single device failure must not become an extended outage, whereas the present finding is that multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks; although an HA design can preserve a service boundary across appliance faults if session behavior and failover are validated, the required capability remains missing.

D:

At the rail signaling depot, this mechanism serves the separate situation where the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited, whereas the present finding is that multiple industrial cells use identical private addressing and must share one physical firewall without merging their networks; although limiting communications by destination and industrial operation reduces the blast radius of unauthorized commands, the required capability remains missing.

Question 479

A technician reviewing security evidence from the bulk-material handling facility finds that OT and IoT signatures are inadvertently excluded from the detection configuration on a FortiGate interface. What is the most targeted response?

  1. Increase general traffic logging while leaving OT signature categories excluded
  2. Correlate the observed identity, MAC and network-attachment data before assigning asset roles
  3. Enable device identification on the relevant FortiGate LAN interface
  4. Review the interface signature-exclusion settings for OT and IoT discovery

Explanation

Correct Answer

D:

For the stated gap at the bulk-material handling facility, excluded signature categories suppress matching for those device types and reduce available asset details; that directly resolves the requirement that OT and IoT signatures are inadvertently excluded from the detection configuration on a FortiGate interface.

Incorrect Answers

A:

At the bulk-material handling facility, that alternative is insufficient because more log records cannot re-enable detection categories explicitly excluded at the interface; it leaves unresolved the finding that OT and IoT signatures are inadvertently excluded from the detection configuration on a FortiGate interface.

B:

At the bulk-material handling facility, this mechanism serves the separate situation where the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports, whereas the present finding is that OT and IoT signatures are inadvertently excluded from the detection configuration on a FortiGate interface; although cross-checking stable and transient identifiers helps avoid attributing a device to the wrong machine, the required capability remains missing.

C:

At the bulk-material handling facility, this mechanism serves the separate situation where a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface, whereas the present finding is that OT and IoT signatures are inadvertently excluded from the detection configuration on a FortiGate interface; although interface-level device-identification allows passive gathering of identity information from observed devices, the required capability remains missing.

Question 480

An OT architect reviewing the natural-gas compression station observes two independent gaps: (1) the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports; and (2) a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete. Which joint design is aligned with the exact detection and enforcement gaps?

  1. Review the KEV indicators associated with the discovered asset vulnerability; then plan a supported third-party OT discovery integration with verified field mapping
  2. Correlate the observed identity, MAC and network-attachment data before assigning asset roles; then use FortiNAC inventory representation with connection-status monitoring
  3. Treat a reused IP address as a permanent device identifier; then plan a supported third-party OT discovery integration with verified field mapping
  4. Treat a reused IP address as a permanent device identifier; then authorize unverified imported device labels as trusted production roles
  5. Correlate the observed identity, MAC and network-attachment data before assigning asset roles; then plan a supported third-party OT discovery integration with verified field mapping
  6. Correlate the observed identity, MAC and network-attachment data before assigning asset roles; then authorize unverified imported device labels as trusted production roles

Explanation

Correct Answer

E:

The first control fits because cross-checking stable and transient identifiers helps avoid attributing a device to the wrong machine; the second fits because external industrial visibility can enrich asset classification when integration and trust boundaries are validated. Together they resolve the separate findings at the natural-gas compression station: the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports, and a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete. This addresses the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports without bypassing the separate requirement that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete.

Incorrect Answers

A:

The second action addresses a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete because external industrial visibility can enrich asset classification when integration and trust boundaries are validated, but the separate first finding still concerns the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports. The proposed first mechanism belongs to a different requirement: a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild; known-exploited-vulnerability context differentiates observed exploitation relevance from an undifferentiated list of weaknesses, but despite the valid second control for a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete, it does not resolve the first finding at the natural-gas compression station: the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports.

B:

The first control responds to the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports because cross-checking stable and transient identifiers helps avoid attributing a device to the wrong machine, but the separate second finding still concerns a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete. The second measure targets a different requirement: operators need a record of a discovered switch-connected industrial device and whether it is currently reachable; device inventory is suitable for managed asset presence and polling rather than only user-associated host history, whereas the current second finding is that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete, with the different first requirement being the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports.

C:

The second part is useful because external industrial visibility can enrich asset classification when integration and trust boundaries are validated; however, the first part fails because reassigned addresses can refer to a different endpoint and produce misleading asset classifications. The first gap remains unresolved at the natural-gas compression station: the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports; the second measure helps with a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete but cannot repair it.

D:

The first substitution fails because reassigned addresses can refer to a different endpoint and produce misleading asset classifications; the second fails because asset metadata alone cannot prove the live endpoint is authorized to enter a production access role. For this natural-gas compression station, the first finding is that the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports, while the other is that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete; neither is corrected by the chosen substitutions.

F:

The first action is suitable because cross-checking stable and transient identifiers helps avoid attributing a device to the wrong machine; the second is misdirected because asset metadata alone cannot prove the live endpoint is authorized to enter a production access role. At the natural-gas compression station, the remaining second gap is that a third-party OT monitoring sensor offers useful asset attributes but FortiNAC's native evidence is incomplete, even though the plant's asset register contains stale IP-based assumptions after mobile maintenance devices change ports is covered.

Fortinet NSE 6 - OT Security 7.6 Architect (NSE6_OTS_AR-7.6) Practice Tests