Question 60
The operations team at the offshore pumping platform requests a solution to both recorded symptoms: (1) SOC analysts need a consolidated trend of control-network alerts across multiple sites; and (2) the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. Which two measures correctly map to the operational and security requirements?
- Create a scoped FortiSIEM dashboard using normalized incidents and relevant time filters; then use only general IT vulnerability totals without industrial asset exposure context
- Treat a static switch configuration backup as an incident dashboard; then review the OT Security Risk report and validate its source data and scope
- Create a scoped FortiSIEM dashboard using normalized incidents and relevant time filters; then review the OT Security Risk report and validate its source data and scope
- Build a FortiSIEM correlation rule with appropriate conditions and time window; then review the OT Security Risk report and validate its source data and scope
- Treat a static switch configuration backup as an incident dashboard; then use only general IT vulnerability totals without industrial asset exposure context
Explanation
Correct Answer
C:The first control fits because role-focused dashboards summarize correlated events while retaining drill-down into source evidence; the second fits because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization. Together they resolve the separate findings at the offshore pumping platform: SOC analysts need a consolidated trend of control-network alerts across multiple sites, and the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. This addresses SOC analysts need a consolidated trend of control-network alerts across multiple sites without bypassing the separate requirement that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene.
Incorrect Answers
A:The first action is suitable because role-focused dashboards summarize correlated events while retaining drill-down into source evidence; the second is misdirected because generic IT totals can overlook the exposure and operational consequence of specific controllers. At the offshore pumping platform, the remaining second gap is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, even though SOC analysts need a consolidated trend of control-network alerts across multiple sites is covered.
B:The second part is useful because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization; however, the first part fails because a network configuration archive is not an analytics view of time-varying threats. The first gap remains unresolved at the offshore pumping platform: SOC analysts need a consolidated trend of control-network alerts across multiple sites; the second measure helps with the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene but cannot repair it.
D:The second action addresses the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization, but the separate first finding still concerns SOC analysts need a consolidated trend of control-network alerts across multiple sites. The proposed first mechanism belongs to a different requirement: repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold; rule aggregation across related events can identify repeated suspicious behavior rather than separate isolated messages, but despite the valid second control for the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, it does not resolve the first finding at the offshore pumping platform: SOC analysts need a consolidated trend of control-network alerts across multiple sites.
E:The first substitution fails because a network configuration archive is not an analytics view of time-varying threats; the second fails because generic IT totals can overlook the exposure and operational consequence of specific controllers. For this offshore pumping platform, the first finding is that SOC analysts need a consolidated trend of control-network alerts across multiple sites, while the other is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; neither is corrected by the chosen substitutions.
Question 61
An audit at the paper mill control network finds that the plant must preserve the identity and connection history of a registered technician workstation for access investigations. The proposed shortcut is to replace the host record with a static switch-port label. Which alternative should the architect approve instead?
- Review the ranking and specificity of enabled device profiling rules
- Investigate the rogue-host record and allow the profiling workflow to classify it
- Maintain the endpoint in FortiNAC Host View with appropriate user association
- Replace the host record with a static switch-port label
Explanation
Correct Answer
C:In this paper mill control network scenario, Host View preserves host and connection context needed for accountability and access workflows; that directly resolves the requirement that the plant must preserve the identity and connection history of a registered technician workstation for access investigations.
Incorrect Answers
A:At the paper mill control network, this mechanism serves the separate situation where a rogue device has an IP address and multiple profiling rules might match different attributes, whereas the present finding is that the plant must preserve the identity and connection history of a registered technician workstation for access investigations; although FortiNAC evaluates eligible rules by rank so precedence affects the first matching classification, the required capability remains missing.
B:At the paper mill control network, this mechanism serves the separate situation where FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered, whereas the present finding is that the plant must preserve the identity and connection history of a registered technician workstation for access investigations; although an unrecognized MAC is initially tracked as a rogue and can be evaluated against profiling criteria once observations are available, the required capability remains missing.
D:At the paper mill control network, this substitutes a measure addressing a different concern: a port description does not retain host history or link the observed endpoint with an accountable user; it leaves unresolved the finding that the plant must preserve the identity and connection history of a registered technician workstation for access investigations.
Question 62
Before the offshore pumping platform accepts a proposed OT security architecture, it must demonstrate: (1) a validated OT incident needs controlled notification to on-call analysts rather than a silent dashboard entry; and (2) repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold. Which combination addresses the required mechanisms at their proper enforcement or observation points?
- Configure the associated incident or event notification channel and recipient routing; then build a FortiSIEM correlation rule with appropriate conditions and time window
- Schedule a next-day report instead of configuring timely event notifications; then build a FortiSIEM correlation rule with appropriate conditions and time window
- Schedule a next-day report instead of configuring timely event notifications; then configure a static asset inventory export as the detection rule
- Configure the associated incident or event notification channel and recipient routing; then configure a static asset inventory export as the detection rule
Explanation
Correct Answer
A:The first control fits because alerts have operational value only when they reach the accountable responder with sufficient context; the second fits because rule aggregation across related events can identify repeated suspicious behavior rather than separate isolated messages. Together they resolve the separate findings at the offshore pumping platform: a validated OT incident needs controlled notification to on-call analysts rather than a silent dashboard entry, and repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold. This addresses a validated OT incident needs controlled notification to on-call analysts rather than a silent dashboard entry without bypassing the separate requirement that repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold.
Incorrect Answers
B:The second part is useful because rule aggregation across related events can identify repeated suspicious behavior rather than separate isolated messages; however, the first part fails because a periodic report does not route the qualifying incident to an on-call responder when it fires. The first gap remains unresolved at the offshore pumping platform: a validated OT incident needs controlled notification to on-call analysts rather than a silent dashboard entry; the second measure helps with repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold but cannot repair it.
C:The first substitution fails because a periodic report does not route the qualifying incident to an on-call responder when it fires; the second fails because an inventory snapshot does not evaluate event frequency over time. For this offshore pumping platform, the first finding is that a validated OT incident needs controlled notification to on-call analysts rather than a silent dashboard entry, while the other is that repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold; neither is corrected by the chosen substitutions.
D:The first action is suitable because alerts have operational value only when they reach the accountable responder with sufficient context; the second is misdirected because an inventory snapshot does not evaluate event frequency over time. At the offshore pumping platform, the remaining second gap is that repeated unauthorized maintenance attempts should become one notable security incident under a defined time threshold, even though a validated OT incident needs controlled notification to on-call analysts rather than a silent dashboard entry is covered.
Question 63
An OT architect reviewing the industrial refrigeration installation observes two independent gaps: (1) the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443; and (2) sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN. Which joint design is aligned with the exact detection and enforcement gaps?
- Define zone-specific security requirements and assess the conduits connecting them; then collect telemetry through approved segmented collectors and controlled boundary paths
- Define zone-specific security requirements and assess the conduits connecting them; then permit unrestricted enterprise access directly to the controller subnet
- Declare the entire production LAN compliant because it has a perimeter firewall; then permit unrestricted enterprise access directly to the controller subnet
- Declare the entire production LAN compliant because it has a perimeter firewall; then collect telemetry through approved segmented collectors and controlled boundary paths
Explanation
Correct Answer
A:The first control fits because ISA/IEC 62443 promotes risk-informed partitioning and explicitly governed communications across trust boundaries; the second fits because controlled information flows preserve OT segmentation while supplying analysis outside sensitive control segments. Together they resolve the separate findings at the industrial refrigeration installation: the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443, and sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN. This addresses the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443 without bypassing the separate requirement that sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN.
Incorrect Answers
B:The first action is suitable because ISA/IEC 62443 promotes risk-informed partitioning and explicitly governed communications across trust boundaries; the second is misdirected because broad inbound reachability enlarges the exposure of assets intended to remain isolated. At the industrial refrigeration installation, the remaining second gap is that sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN, even though the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443 is covered.
C:The first substitution fails because one perimeter device cannot demonstrate zone-level requirements or govern all lateral paths; the second fails because broad inbound reachability enlarges the exposure of assets intended to remain isolated. For this industrial refrigeration installation, the first finding is that the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443, while the other is that sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN; neither is corrected by the chosen substitutions.
D:The second part is useful because controlled information flows preserve OT segmentation while supplying analysis outside sensitive control segments; however, the first part fails because one perimeter device cannot demonstrate zone-level requirements or govern all lateral paths. The first gap remains unresolved at the industrial refrigeration installation: the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443; the second measure helps with sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN but cannot repair it.
Question 64
A targeted security validation of the glass manufacturing line specifies the following: (1) a virtual patching exemption has been configured for a known device and its expected mitigation is not applied; and (2) EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities. Which two measures correctly map to the operational and security requirements?
- Increase firewall logging without inspecting virtual-patching exemptions; then distinguish necessary cyclic industrial communications from unnecessary management or engineering access
- Review device-level and signature-level exemption lists before assuming signature failure; then distinguish necessary cyclic industrial communications from unnecessary management or engineering access
- Review device-level and signature-level exemption lists before assuming signature failure; then treat all EtherNet/IP-associated services as one unrestricted application
- Use supported manual licensing and security package transfer procedures for the offline FortiGate; then distinguish necessary cyclic industrial communications from unnecessary management or engineering access
- Increase firewall logging without inspecting virtual-patching exemptions; then treat all EtherNet/IP-associated services as one unrestricted application
Explanation
Correct Answer
B:The first control fits because an exempted MAC or rule can intentionally skip otherwise applicable virtual patching checks; the second fits because EtherNet/IP operational traffic and configuration reachability can require different security treatment. Together they resolve the separate findings at the glass manufacturing line: a virtual patching exemption has been configured for a known device and its expected mitigation is not applied, and EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities. This addresses a virtual patching exemption has been configured for a known device and its expected mitigation is not applied without bypassing the separate requirement that EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities.
Incorrect Answers
A:The second part is useful because EtherNet/IP operational traffic and configuration reachability can require different security treatment; however, the first part fails because more event records cannot override an exemption that skips protection for a device or rule. The first gap remains unresolved at the glass manufacturing line: a virtual patching exemption has been configured for a known device and its expected mitigation is not applied; the second measure helps with EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities but cannot repair it.
C:The first action is suitable because an exempted MAC or rule can intentionally skip otherwise applicable virtual patching checks; the second is misdirected because a family-level blanket permit loses the ability to narrow sensitive maintenance behavior. At the glass manufacturing line, the remaining second gap is that EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities, even though a virtual patching exemption has been configured for a known device and its expected mitigation is not applied is covered.
D:The second action addresses EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities because EtherNet/IP operational traffic and configuration reachability can require different security treatment, but the separate first finding still concerns a virtual patching exemption has been configured for a known device and its expected mitigation is not applied. The proposed first mechanism belongs to a different requirement: the facility is air-gapped and cannot reach FortiGuard update servers directly; an air-gap deployment needs a controlled update transfer rather than assuming live FortiGuard queries, but despite the valid second control for EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities, it does not resolve the first finding at the glass manufacturing line: a virtual patching exemption has been configured for a known device and its expected mitigation is not applied.
E:The first substitution fails because more event records cannot override an exemption that skips protection for a device or rule; the second fails because a family-level blanket permit loses the ability to narrow sensitive maintenance behavior. For this glass manufacturing line, the first finding is that a virtual patching exemption has been configured for a known device and its expected mitigation is not applied, while the other is that EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities; neither is corrected by the chosen substitutions.
Question 65
At a bulk-material handling facility, engineers must address both of these documented gaps: (1) remote engineers must prove a second factor before accessing a restricted OT management service; and (2) a registered workstation failed its compliance policy scan but must receive only remediation access. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.
- Treat every failed posture scan as a successful normal registration
- Depend solely on knowledge of the engineer's IP address
- Require supported multi-factor authentication for the administrative sign-in
- Apply FortiNAC forced remediation and the remediation isolation state
Explanation
Correct Answers
C:For the stated gap at the bulk-material handling facility, a second independent authentication factor reduces reliance on a stolen password for human access; that directly resolves the requirement that remote engineers must prove a second factor before accessing a restricted OT management service; it is evaluated alongside the separate requirement that a registered workstation failed its compliance policy scan but must receive only remediation access.
D:At the bulk-material handling facility, untrusted registered hosts can be restricted until their compliance posture is corrected; that directly resolves the requirement that a registered workstation failed its compliance policy scan but must receive only remediation access; it is evaluated alongside the separate requirement that remote engineers must prove a second factor before accessing a restricted OT management service.
Incorrect Answers
A:At the bulk-material handling facility, the expected mechanism is absent because registration status does not mean a device still meets the required security posture; it leaves unresolved the finding that a registered workstation failed its compliance policy scan but must receive only remediation access; the parallel design also has to address remote engineers must prove a second factor before accessing a restricted OT management service.
B:At the bulk-material handling facility, that alternative is insufficient because network origin is neither an individual identity proof nor a second factor; it leaves unresolved the finding that remote engineers must prove a second factor before accessing a restricted OT management service; the parallel design also has to address a registered workstation failed its compliance policy scan but must receive only remediation access.
Question 66
During troubleshooting of the rail signaling depot, the operator confirms that planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network. The proposed shortcut is to run unrestricted vulnerability scans on every field controller during production. Which alternative should the architect approve instead?
- Identify time-critical controllers and field devices and prefer passive discovery initially
- Run unrestricted vulnerability scans on every field controller during production
- Group systems into security zones and document controlled conduits between them
- Record sensors, actuators, PLCs and supervisory components by operational role
Explanation
Correct Answer
A:At the rail signaling depot, controllers and field equipment can have strict latency and availability constraints that make intrusive discovery inappropriate; that directly resolves the requirement that planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network.
Incorrect Answers
B:At the rail signaling depot, the expected mechanism is absent because indiscriminate active probing can disrupt legacy or timing-sensitive industrial endpoints; it leaves unresolved the finding that planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network.
C:At the rail signaling depot, this mechanism serves the separate situation where assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement, whereas the present finding is that planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network; although comparable security requirements belong in zones and the inter-zone paths need separately governed conduits, the required capability remains missing.
D:At the rail signaling depot, this mechanism serves the separate situation where a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization, whereas the present finding is that planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network; although recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis, the required capability remains missing.
Question 67
At a natural-gas compression station, engineers must address both of these documented gaps: (1) logs from industrial devices arrive but different vendors use inconsistent source and device fields; and (2) operations wants a site-specific FortiSIEM dashboard rather than a corporate-wide incident summary. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.
- Reuse an unfiltered global dashboard as proof of site-only risk
- Correlate only the raw text length of each log message
- Validate log collection and parsing into normalized FortiSIEM event attributes
- Filter the dashboard on the OT site, incident dimensions and period of interest
Explanation
Correct Answers
C:For the stated gap at the natural-gas compression station, consistent event attributes allow analytics to compare signals from different OT sources; that directly resolves the requirement that logs from industrial devices arrive but different vendors use inconsistent source and device fields; it is evaluated alongside the separate requirement that operations wants a site-specific FortiSIEM dashboard rather than a corporate-wide incident summary.
D:At the natural-gas compression station, site and time scoping align the visualization with local risk owners; that directly resolves the requirement that operations wants a site-specific FortiSIEM dashboard rather than a corporate-wide incident summary; it is evaluated alongside the separate requirement that logs from industrial devices arrive but different vendors use inconsistent source and device fields.
Incorrect Answers
A:At the natural-gas compression station, the expected mechanism is absent because enterprise aggregates cannot isolate the plant's contribution without appropriate scoping; it leaves unresolved the finding that operations wants a site-specific FortiSIEM dashboard rather than a corporate-wide incident summary; the parallel design also has to address logs from industrial devices arrive but different vendors use inconsistent source and device fields.
B:At the natural-gas compression station, that alternative is insufficient because message size is not a reliable substitute for normalizing the affected asset and activity; it leaves unresolved the finding that logs from industrial devices arrive but different vendors use inconsistent source and device fields; the parallel design also has to address operations wants a site-specific FortiSIEM dashboard rather than a corporate-wide incident summary.
Question 68
An overnight review of the glass manufacturing line reveals these unrelated but concurrent findings: (1) a plant wants to check whether an emergency data route bypasses its intended industrial DMZ; and (2) operators need a record of a discovered switch-connected industrial device and whether it is currently reachable. Which plan provides the needed control for each finding rather than a superficial substitute?
- Assume any route with low latency is authorized; then use FortiNAC inventory representation with connection-status monitoring
- Verify the implemented path against the defined OT zones and boundary policy; then maintain only a list of IP addresses seen in historical firewall sessions
- Verify the implemented path against the defined OT zones and boundary policy; then use FortiNAC inventory representation with connection-status monitoring
- Assume any route with low latency is authorized; then maintain only a list of IP addresses seen in historical firewall sessions
Explanation
Correct Answer
C:The first control fits because comparing actual network paths with approved conduits reveals ungoverned enterprise-to-control bypasses; the second fits because device inventory is suitable for managed asset presence and polling rather than only user-associated host history. Together they resolve the separate findings at the glass manufacturing line: a plant wants to check whether an emergency data route bypasses its intended industrial DMZ, and operators need a record of a discovered switch-connected industrial device and whether it is currently reachable. This addresses a plant wants to check whether an emergency data route bypasses its intended industrial DMZ without bypassing the separate requirement that operators need a record of a discovered switch-connected industrial device and whether it is currently reachable.
Incorrect Answers
A:The second part is useful because device inventory is suitable for managed asset presence and polling rather than only user-associated host history; however, the first part fails because acceptable response time does not establish that a cross-zone path meets security requirements. The first gap remains unresolved at the glass manufacturing line: a plant wants to check whether an emergency data route bypasses its intended industrial DMZ; the second measure helps with operators need a record of a discovered switch-connected industrial device and whether it is currently reachable but cannot repair it.
B:The first action is suitable because comparing actual network paths with approved conduits reveals ungoverned enterprise-to-control bypasses; the second is misdirected because a past traffic list does not maintain current managed-device connection state or reliable endpoint identity. At the glass manufacturing line, the remaining second gap is that operators need a record of a discovered switch-connected industrial device and whether it is currently reachable, even though a plant wants to check whether an emergency data route bypasses its intended industrial DMZ is covered.
D:The first substitution fails because acceptable response time does not establish that a cross-zone path meets security requirements; the second fails because a past traffic list does not maintain current managed-device connection state or reliable endpoint identity. For this glass manufacturing line, the first finding is that a plant wants to check whether an emergency data route bypasses its intended industrial DMZ, while the other is that operators need a record of a discovered switch-connected industrial device and whether it is currently reachable; neither is corrected by the chosen substitutions.
Question 69
A staged deployment for the rail signaling depot cannot proceed until both conditions are handled: (1) the OT team cannot tell which industrial asset provided the source IP of a detected threat; and (2) FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered. Which two measures correctly map to the operational and security requirements?
- Integrate Fortinet Security Fabric telemetry and inventory across the OT boundary; then investigate the rogue-host record and allow the profiling workflow to classify it
- Remove source identity fields from the SIEM ingest pipeline; then automatically declare every new MAC address a trusted PLC
- Associate firewall events with resolved device identity and asset attributes; then automatically declare every new MAC address a trusted PLC
- Associate firewall events with resolved device identity and asset attributes; then investigate the rogue-host record and allow the profiling workflow to classify it
- Remove source identity fields from the SIEM ingest pipeline; then investigate the rogue-host record and allow the profiling workflow to classify it
Explanation
Correct Answer
D:The first control fits because enriched asset-to-IP associations make events actionable for specific controllers instead of only transient addresses; the second fits because an unrecognized MAC is initially tracked as a rogue and can be evaluated against profiling criteria once observations are available. Together they resolve the separate findings at the rail signaling depot: the OT team cannot tell which industrial asset provided the source IP of a detected threat, and FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered. This addresses the OT team cannot tell which industrial asset provided the source IP of a detected threat without bypassing the separate requirement that FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered.
Incorrect Answers
A:The second action addresses FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered because an unrecognized MAC is initially tracked as a rogue and can be evaluated against profiling criteria once observations are available, but the separate first finding still concerns the OT team cannot tell which industrial asset provided the source IP of a detected threat. The proposed first mechanism belongs to a different requirement: multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data; correlation of FortiGate enforcement, device identity and analytics observations supports a coordinated OT security view, but despite the valid second control for FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered, it does not resolve the first finding at the rail signaling depot: the OT team cannot tell which industrial asset provided the source IP of a detected threat.
B:The first substitution fails because discarding device identity prevents analysts from relating alerts to the affected industrial asset; the second fails because unknown attachment does not by itself establish a controller identity or trust status. For this rail signaling depot, the first finding is that the OT team cannot tell which industrial asset provided the source IP of a detected threat, while the other is that FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered; neither is corrected by the chosen substitutions.
C:The first action is suitable because enriched asset-to-IP associations make events actionable for specific controllers instead of only transient addresses; the second is misdirected because unknown attachment does not by itself establish a controller identity or trust status. At the rail signaling depot, the remaining second gap is that FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered, even though the OT team cannot tell which industrial asset provided the source IP of a detected threat is covered.
E:The second part is useful because an unrecognized MAC is initially tracked as a rogue and can be evaluated against profiling criteria once observations are available; however, the first part fails because discarding device identity prevents analysts from relating alerts to the affected industrial asset. The first gap remains unresolved at the rail signaling depot: the OT team cannot tell which industrial asset provided the source IP of a detected threat; the second measure helps with FortiNAC sees an unknown MAC address connected to a switch but the host has not been registered but cannot repair it.
Question 70
Before the district heating plant accepts a proposed OT security architecture, it must demonstrate: (1) an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls; and (2) a FortiSIEM report is empty even though operators know incidents exist for the same week. Which proposal fixes both issues while leaving unrelated OT workloads alone?
- Rank treatment using exposure, likelihood, consequence and validated existing controls; then check the report's selected data source, time range and incident filters
- Assign priority solely from the CVE title's alphabetical order; then check the report's selected data source, time range and incident filters
- Use the appropriate CIS Controls Security Rating report and review its underlying checks; then check the report's selected data source, time range and incident filters
- Assign priority solely from the CVE title's alphabetical order; then change the report export format without fixing the event filters
- Rank treatment using exposure, likelihood, consequence and validated existing controls; then change the report export format without fixing the event filters
Explanation
Correct Answer
A:The first control fits because risk decisions depend on reachability and operational impact as well as a numerical weakness score; the second fits because reporting queries depend on correctly scoped events and normalized incident data. Together they resolve the separate findings at the district heating plant: an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls, and a FortiSIEM report is empty even though operators know incidents exist for the same week. This addresses an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls without bypassing the separate requirement that a FortiSIEM report is empty even though operators know incidents exist for the same week.
Incorrect Answers
B:The second part is useful because reporting queries depend on correctly scoped events and normalized incident data; however, the first part fails because the spelling of a vulnerability identifier has no causal relation to plant risk. The first gap remains unresolved at the district heating plant: an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls; the second measure helps with a FortiSIEM report is empty even though operators know incidents exist for the same week but cannot repair it.
C:The second action addresses a FortiSIEM report is empty even though operators know incidents exist for the same week because reporting queries depend on correctly scoped events and normalized incident data, but the separate first finding still concerns an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls. The proposed first mechanism belongs to a different requirement: a security team wants evidence related to its baseline CIS Controls implementation; CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance, but despite the valid second control for a FortiSIEM report is empty even though operators know incidents exist for the same week, it does not resolve the first finding at the district heating plant: an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls.
D:The first substitution fails because the spelling of a vulnerability identifier has no causal relation to plant risk; the second fails because export format does not change whether the query selects the underlying incident records. For this district heating plant, the first finding is that an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls, while the other is that a FortiSIEM report is empty even though operators know incidents exist for the same week; neither is corrected by the chosen substitutions.
E:The first action is suitable because risk decisions depend on reachability and operational impact as well as a numerical weakness score; the second is misdirected because export format does not change whether the query selects the underlying incident records. At the district heating plant, the remaining second gap is that a FortiSIEM report is empty even though operators know incidents exist for the same week, even though an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls is covered.