Fortinet NSE6_OTS_AR-7.6 (Fortinet NSE 6 - OT Security 7.6 Architect) Practice Test 79

Question 780

A plant security engineer at the mineral processing site needs a focused remedy because the OT team cannot tell which industrial asset provided the source IP of a detected threat. What is the most targeted response?

  1. Integrate Fortinet Security Fabric telemetry and inventory across the OT boundary
  2. Verify the implemented path against the defined OT zones and boundary policy
  3. Remove source identity fields from the SIEM ingest pipeline
  4. Associate firewall events with resolved device identity and asset attributes

Explanation

Correct Answer

D:

In this mineral processing site scenario, enriched asset-to-IP associations make events actionable for specific controllers instead of only transient addresses; that directly resolves the requirement that the OT team cannot tell which industrial asset provided the source IP of a detected threat.

Incorrect Answers

A:

At the mineral processing site, this mechanism serves the separate situation where multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data, whereas the present finding is that the OT team cannot tell which industrial asset provided the source IP of a detected threat; although correlation of FortiGate enforcement, device identity and analytics observations supports a coordinated OT security view, the required capability remains missing.

B:

At the mineral processing site, this mechanism serves the separate situation where a plant wants to check whether an emergency data route bypasses its intended industrial DMZ, whereas the present finding is that the OT team cannot tell which industrial asset provided the source IP of a detected threat; although comparing actual network paths with approved conduits reveals ungoverned enterprise-to-control bypasses, the required capability remains missing.

C:

At the mineral processing site, this substitutes a measure addressing a different concern: discarding device identity prevents analysts from relating alerts to the affected industrial asset; it leaves unresolved the finding that the OT team cannot tell which industrial asset provided the source IP of a detected threat.

Question 781

Before the port container terminal accepts a proposed OT security architecture, it must demonstrate: (1) a basic handler exists but the incident queue remains empty after the intended event fires; and (2) a FortiSIEM report is empty even though operators know incidents exist for the same week. Which combination addresses the required mechanisms at their proper enforcement or observation points?

  1. Increase the handler severity while leaving automatic incident creation disabled; then check the report's selected data source, time range and incident filters
  2. Increase the handler severity while leaving automatic incident creation disabled; then change the report export format without fixing the event filters
  3. Enable automatic incident creation in the relevant FortiAnalyzer event handler; then change the report export format without fixing the event filters
  4. Enable automatic incident creation in the relevant FortiAnalyzer event handler; then check the report's selected data source, time range and incident filters

Explanation

Correct Answer

D:

The first control fits because FortiAnalyzer can turn qualifying handler events into incidents when the create-incident setting is enabled; the second fits because reporting queries depend on correctly scoped events and normalized incident data. Together they resolve the separate findings at the port container terminal: a basic handler exists but the incident queue remains empty after the intended event fires, and a FortiSIEM report is empty even though operators know incidents exist for the same week. This addresses a basic handler exists but the incident queue remains empty after the intended event fires without bypassing the separate requirement that a FortiSIEM report is empty even though operators know incidents exist for the same week.

Incorrect Answers

A:

The second part is useful because reporting queries depend on correctly scoped events and normalized incident data; however, the first part fails because raising the event severity does not activate the distinct incident-creation switch. The first gap remains unresolved at the port container terminal: a basic handler exists but the incident queue remains empty after the intended event fires; the second measure helps with a FortiSIEM report is empty even though operators know incidents exist for the same week but cannot repair it.

B:

The first substitution fails because raising the event severity does not activate the distinct incident-creation switch; the second fails because export format does not change whether the query selects the underlying incident records. For this port container terminal, the first finding is that a basic handler exists but the incident queue remains empty after the intended event fires, while the other is that a FortiSIEM report is empty even though operators know incidents exist for the same week; neither is corrected by the chosen substitutions.

C:

The first action is suitable because FortiAnalyzer can turn qualifying handler events into incidents when the create-incident setting is enabled; the second is misdirected because export format does not change whether the query selects the underlying incident records. At the port container terminal, the remaining second gap is that a FortiSIEM report is empty even though operators know incidents exist for the same week, even though a basic handler exists but the incident queue remains empty after the intended event fires is covered.

Question 782

The controls engineer and SOC analyst for the automotive assembly line must jointly address the following: (1) a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to; and (2) an OPC UA telemetry server must serve selected clients but no other production hosts. Which proposal fixes both issues while leaving unrelated OT workloads alone?

  1. Define and test the severity and action choices within a virtual patching profile; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
  2. Enable and verify relevant device identification before expecting per-device virtual patch lookup; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
  3. Turn off all device identification and expect target-specific rules; then permit arbitrary inbound sessions to all OPC UA endpoints
  4. Enable and verify relevant device identification before expecting per-device virtual patch lookup; then permit arbitrary inbound sessions to all OPC UA endpoints
  5. Turn off all device identification and expect target-specific rules; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness

Explanation

Correct Answer

B:

The first control fits because observed device attributes supply the context used to match vulnerabilities and protection rules; the second fits because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure. Together they resolve the separate findings at the automotive assembly line: a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to, and an OPC UA telemetry server must serve selected clients but no other production hosts. This addresses a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to without bypassing the separate requirement that an OPC UA telemetry server must serve selected clients but no other production hosts.

Incorrect Answers

A:

The second action addresses an OPC UA telemetry server must serve selected clients but no other production hosts because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure, but the separate first finding still concerns a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to. The proposed first mechanism belongs to a different requirement: the security engineer must decide which severity levels are actively blocked and which are only logged; profile-level action and severity selections set which matched mitigations are enforced versus observed, but despite the valid second control for an OPC UA telemetry server must serve selected clients but no other production hosts, it does not resolve the first finding at the automotive assembly line: a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to.

C:

The first substitution fails because disabling discovery removes input that the device-aware matching process requires; the second fails because open access disregards the intended client and server trust boundary. For this automotive assembly line, the first finding is that a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to, while the other is that an OPC UA telemetry server must serve selected clients but no other production hosts; neither is corrected by the chosen substitutions.

D:

The first action is suitable because observed device attributes supply the context used to match vulnerabilities and protection rules; the second is misdirected because open access disregards the intended client and server trust boundary. At the automotive assembly line, the remaining second gap is that an OPC UA telemetry server must serve selected clients but no other production hosts, even though a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to is covered.

E:

The second part is useful because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure; however, the first part fails because disabling discovery removes input that the device-aware matching process requires. The first gap remains unresolved at the automotive assembly line: a virtual patching rule cannot identify which detected industrial endpoint the vulnerability applies to; the second measure helps with an OPC UA telemetry server must serve selected clients but no other production hosts but cannot repair it.

Question 783

An industrial network audit at the pharmaceutical production floor establishes two requirements: (1) a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization; and (2) sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN. Which paired action most directly satisfies both findings without introducing an unrelated control change?

  1. Record sensors, actuators, PLCs and supervisory components by operational role; then collect telemetry through approved segmented collectors and controlled boundary paths
  2. Classify all equipment as interchangeable Ethernet endpoints; then permit unrestricted enterprise access directly to the controller subnet
  3. Record sensors, actuators, PLCs and supervisory components by operational role; then permit unrestricted enterprise access directly to the controller subnet
  4. Classify all equipment as interchangeable Ethernet endpoints; then collect telemetry through approved segmented collectors and controlled boundary paths

Explanation

Correct Answer

A:

The first control fits because recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis; the second fits because controlled information flows preserve OT segmentation while supplying analysis outside sensitive control segments. Together they resolve the separate findings at the pharmaceutical production floor: a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization, and sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN. This addresses a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization without bypassing the separate requirement that sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN.

Incorrect Answers

B:

The first substitution fails because a generic network label obscures who senses, controls or merely displays industrial processes; the second fails because broad inbound reachability enlarges the exposure of assets intended to remain isolated. For this pharmaceutical production floor, the first finding is that a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization, while the other is that sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN; neither is corrected by the chosen substitutions.

C:

The first action is suitable because recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis; the second is misdirected because broad inbound reachability enlarges the exposure of assets intended to remain isolated. At the pharmaceutical production floor, the remaining second gap is that sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN, even though a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization is covered.

D:

The second part is useful because controlled information flows preserve OT segmentation while supplying analysis outside sensitive control segments; however, the first part fails because a generic network label obscures who senses, controls or merely displays industrial processes. The first gap remains unresolved at the pharmaceutical production floor: a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization; the second measure helps with sensors at a process-control layer must be visible to the SOC without exposing those sensors directly to the enterprise LAN but cannot repair it.

Question 784

The glass manufacturing line is preparing a controlled rollout. One outstanding requirement is that an event-monitoring design confuses DNP3 event communication with ordinary operator web sessions. What is the most targeted response?

  1. Restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
  2. Apply a generic HTTP-only parsing assumption to DNP3 events
  3. Distinguish necessary cyclic industrial communications from unnecessary management or engineering access
  4. Identify DNP3 traffic using its industrial protocol context and configured communications pattern

Explanation

Correct Answer

D:

At the glass manufacturing line, DNP3 supports telemetry and control exchanges that require different baselines from web browsing; that directly resolves the requirement that an event-monitoring design confuses DNP3 event communication with ordinary operator web sessions.

Incorrect Answers

A:

At the glass manufacturing line, this mechanism serves the separate situation where an OPC UA telemetry server must serve selected clients but no other production hosts, whereas the present finding is that an event-monitoring design confuses DNP3 event communication with ordinary operator web sessions; although restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure, the required capability remains missing.

B:

At the glass manufacturing line, the expected mechanism is absent because a web request parser does not describe DNP3 operational functions or expected field-device messages; it leaves unresolved the finding that an event-monitoring design confuses DNP3 event communication with ordinary operator web sessions.

C:

At the glass manufacturing line, this mechanism serves the separate situation where EtherNet/IP controller exchanges are allowed but an uncontrolled engineering port still exposes programming capabilities, whereas the present finding is that an event-monitoring design confuses DNP3 event communication with ordinary operator web sessions; although EtherNet/IP operational traffic and configuration reachability can require different security treatment, the required capability remains missing.

Question 785

The operations and security teams for the battery manufacturing line agree on these acceptance criteria: (1) remote engineers must prove a second factor before accessing a restricted OT management service; and (2) the production VLAN should change according to the registered host's assigned industrial role. Which paired configuration should be included in the approved OT security change?

  1. Depend solely on knowledge of the engineer's IP address; then apply FortiNAC role-based network access or matching network access policies
  2. Require supported multi-factor authentication for the administrative sign-in; then assign every registered host to the same unrestricted VLAN
  3. Depend solely on knowledge of the engineer's IP address; then assign every registered host to the same unrestricted VLAN
  4. Apply identity-aware firewall rules using the authenticated user group; then apply FortiNAC role-based network access or matching network access policies
  5. Require supported multi-factor authentication for the administrative sign-in; then apply FortiNAC role-based network access or matching network access policies

Explanation

Correct Answer

E:

The first control fits because a second independent authentication factor reduces reliance on a stolen password for human access; the second fits because the device or host role can drive the resulting VLAN instead of a single shared access state. Together they resolve the separate findings at the battery manufacturing line: remote engineers must prove a second factor before accessing a restricted OT management service, and the production VLAN should change according to the registered host's assigned industrial role. This addresses remote engineers must prove a second factor before accessing a restricted OT management service without bypassing the separate requirement that the production VLAN should change according to the registered host's assigned industrial role.

Incorrect Answers

A:

The second part is useful because the device or host role can drive the resulting VLAN instead of a single shared access state; however, the first part fails because network origin is neither an individual identity proof nor a second factor. The first gap remains unresolved at the battery manufacturing line: remote engineers must prove a second factor before accessing a restricted OT management service; the second measure helps with the production VLAN should change according to the registered host's assigned industrial role but cannot repair it.

B:

The first action is suitable because a second independent authentication factor reduces reliance on a stolen password for human access; the second is misdirected because indiscriminate placement ignores differences between contractor, HMI and controller privileges. At the battery manufacturing line, the remaining second gap is that the production VLAN should change according to the registered host's assigned industrial role, even though remote engineers must prove a second factor before accessing a restricted OT management service is covered.

C:

The first substitution fails because network origin is neither an individual identity proof nor a second factor; the second fails because indiscriminate placement ignores differences between contractor, HMI and controller privileges. For this battery manufacturing line, the first finding is that remote engineers must prove a second factor before accessing a restricted OT management service, while the other is that the production VLAN should change according to the registered host's assigned industrial role; neither is corrected by the chosen substitutions.

D:

The second action addresses the production VLAN should change according to the registered host's assigned industrial role because the device or host role can drive the resulting VLAN instead of a single shared access state, but the separate first finding still concerns remote engineers must prove a second factor before accessing a restricted OT management service. The proposed first mechanism belongs to a different requirement: firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; group-scoped authorization links a verified human identity to the permitted network session, but despite the valid second control for the production VLAN should change according to the registered host's assigned industrial role, it does not resolve the first finding at the battery manufacturing line: remote engineers must prove a second factor before accessing a restricted OT management service.

Question 786

The technical reviewer for the solar power operations center must select controls for these two findings: (1) the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited; and (2) the security review demands auditable separation between identity verification and permission to operate a controller. Which paired configuration should be included in the approved OT security change?

  1. Restrict the approved traffic at the correct conduit using protocol-aware controls where available; then record the authentication source and narrowly scoped authorization policy separately
  2. Restrict the approved traffic at the correct conduit using protocol-aware controls where available; then treat a successful password check as permission for all industrial commands
  3. Permit every function of the industrial protocol because its TCP port is known; then treat a successful password check as permission for all industrial commands
  4. Permit every function of the industrial protocol because its TCP port is known; then record the authentication source and narrowly scoped authorization policy separately

Explanation

Correct Answer

A:

The first control fits because limiting communications by destination and industrial operation reduces the blast radius of unauthorized commands; the second fits because proving who a person is and determining what that person may access are distinct security decisions. Together they resolve the separate findings at the solar power operations center: the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited, and the security review demands auditable separation between identity verification and permission to operate a controller. This addresses the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited without bypassing the separate requirement that the security review demands auditable separation between identity verification and permission to operate a controller.

Incorrect Answers

B:

The first action is suitable because limiting communications by destination and industrial operation reduces the blast radius of unauthorized commands; the second is misdirected because credential verification alone does not define allowed destinations or permitted actions. At the solar power operations center, the remaining second gap is that the security review demands auditable separation between identity verification and permission to operate a controller, even though the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited is covered.

C:

The first substitution fails because a port-level permit alone does not distinguish safe read operations from dangerous writes; the second fails because credential verification alone does not define allowed destinations or permitted actions. For this solar power operations center, the first finding is that the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited, while the other is that the security review demands auditable separation between identity verification and permission to operate a controller; neither is corrected by the chosen substitutions.

D:

The second part is useful because proving who a person is and determining what that person may access are distinct security decisions; however, the first part fails because a port-level permit alone does not distinguish safe read operations from dangerous writes. The first gap remains unresolved at the solar power operations center: the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited; the second measure helps with the security review demands auditable separation between identity verification and permission to operate a controller but cannot repair it.

Question 787

An overnight review of the food-processing factory reveals these unrelated but concurrent findings: (1) OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred; and (2) the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations. Which proposal fixes both issues while leaving unrelated OT workloads alone?

  1. Prioritize a temporary validated network mitigation and track the residual remediation task; then design Modbus-aware operation filtering where supported at the control conduit
  2. Remove the vulnerability from the asset inventory because the patch is delayed; then design Modbus-aware operation filtering where supported at the control conduit
  3. Remove the vulnerability from the asset inventory because the patch is delayed; then treat every Modbus packet as equally safe after allowing port 502
  4. Prioritize a temporary validated network mitigation and track the residual remediation task; then treat every Modbus packet as equally safe after allowing port 502
  5. Correlate threat action, policy identity and reachability evidence during a safe validation; then design Modbus-aware operation filtering where supported at the control conduit

Explanation

Correct Answer

A:

The first control fits because KEV context raises exploit concern while temporary protection should remain linked to the eventual vendor fix; the second fits because Modbus function-level distinctions matter because read and write requests can share one TCP service. Together they resolve the separate findings at the food-processing factory: OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred, and the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations. This addresses OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred without bypassing the separate requirement that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations.

Incorrect Answers

B:

The second part is useful because Modbus function-level distinctions matter because read and write requests can share one TCP service; however, the first part fails because suppressing the record does not reduce the underlying likelihood or impact. The first gap remains unresolved at the food-processing factory: OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred; the second measure helps with the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations but cannot repair it.

C:

The first substitution fails because suppressing the record does not reduce the underlying likelihood or impact; the second fails because a common transport service does not restrict the embedded function being requested. For this food-processing factory, the first finding is that OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred, while the other is that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations; neither is corrected by the chosen substitutions.

D:

The first action is suitable because KEV context raises exploit concern while temporary protection should remain linked to the eventual vendor fix; the second is misdirected because a common transport service does not restrict the embedded function being requested. At the food-processing factory, the remaining second gap is that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations, even though OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred is covered.

E:

The second action addresses the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations because Modbus function-level distinctions matter because read and write requests can share one TCP service, but the separate first finding still concerns OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred. The proposed first mechanism belongs to a different requirement: the SOC wants to verify that an exploit was mitigated by the intended protection policy rather than by endpoint downtime; documented policy hits and blocked detections distinguish intended mitigation from an unavailable controller, but despite the valid second control for the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations, it does not resolve the first finding at the food-processing factory: OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred.

Question 788

The controls engineer and SOC analyst for the airport baggage control system must jointly address the following: (1) assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement; and (2) FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent. Which plan provides the needed control for each finding rather than a superficial substitute?

  1. Document switch-port asset labels without defining inter-zone policies; then mark the device trusted only because its fingerprint is missing
  2. Group systems into security zones and document controlled conduits between them; then investigate missing profiling attributes before changing the classification
  3. Group systems into security zones and document controlled conduits between them; then mark the device trusted only because its fingerprint is missing
  4. Document switch-port asset labels without defining inter-zone policies; then investigate missing profiling attributes before changing the classification

Explanation

Correct Answer

B:

The first control fits because comparable security requirements belong in zones and the inter-zone paths need separately governed conduits; the second fits because a missing-data profiling event means the rule lacks evidence for a meaningful comparison. Together they resolve the separate findings at the airport baggage control system: assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement, and FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent. This addresses assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement without bypassing the separate requirement that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent.

Incorrect Answers

A:

The first substitution fails because switch-port documentation alone cannot establish zone trust or govern the path between different risk groups; the second fails because absence of evidence is not a reliable basis for moving a rogue into a production segment. For this airport baggage control system, the first finding is that assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement, while the other is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent; neither is corrected by the chosen substitutions.

C:

The first action is suitable because comparable security requirements belong in zones and the inter-zone paths need separately governed conduits; the second is misdirected because absence of evidence is not a reliable basis for moving a rogue into a production segment. At the airport baggage control system, the remaining second gap is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent, even though assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement is covered.

D:

The second part is useful because a missing-data profiling event means the rule lacks evidence for a meaningful comparison; however, the first part fails because switch-port documentation alone cannot establish zone trust or govern the path between different risk groups. The first gap remains unresolved at the airport baggage control system: assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement; the second measure helps with FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent but cannot repair it.

Question 789

A security assessment of the municipal water-treatment facility records two issues: (1) inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall; and (2) the security engineer must decide which severity levels are actively blocked and which are only logged. Which joint design is aligned with the exact detection and enforcement gaps?

  1. Enable a suitable IPS security profile on the conduit firewall policy; then define and test the severity and action choices within a virtual patching profile
  2. Increase the logging retention time while leaving the payload encrypted; then define and test the severity and action choices within a virtual patching profile
  3. Evaluate supported decryption or a suitable alternative inspection point within safety constraints; then define and test the severity and action choices within a virtual patching profile
  4. Increase the logging retention time while leaving the payload encrypted; then increase traffic logging while leaving virtual-patching severity actions unchanged
  5. Evaluate supported decryption or a suitable alternative inspection point within safety constraints; then increase traffic logging while leaving virtual-patching severity actions unchanged

Explanation

Correct Answer

C:

The first control fits because a payload analyzer cannot interpret encrypted commands unless the necessary content becomes visible at a trusted point; the second fits because profile-level action and severity selections set which matched mitigations are enforced versus observed. Together they resolve the separate findings at the municipal water-treatment facility: inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall, and the security engineer must decide which severity levels are actively blocked and which are only logged. This addresses inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall without bypassing the separate requirement that the security engineer must decide which severity levels are actively blocked and which are only logged.

Incorrect Answers

A:

The second action addresses the security engineer must decide which severity levels are actively blocked and which are only logged because profile-level action and severity selections set which matched mitigations are enforced versus observed, but the separate first finding still concerns inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall. The proposed first mechanism belongs to a different requirement: the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile; the dedicated OT attack definitions are used by IPS inspection when the service is valid and policy is configured, but despite the valid second control for the security engineer must decide which severity levels are actively blocked and which are only logged, it does not resolve the first finding at the municipal water-treatment facility: inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall.

B:

The second part is useful because profile-level action and severity selections set which matched mitigations are enforced versus observed; however, the first part fails because storing more ciphertext does not create visibility into its application-layer command. The first gap remains unresolved at the municipal water-treatment facility: inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall; the second measure helps with the security engineer must decide which severity levels are actively blocked and which are only logged but cannot repair it.

D:

The first substitution fails because storing more ciphertext does not create visibility into its application-layer command; the second fails because extra visibility does not configure which virtual-patching severities should block a session. For this municipal water-treatment facility, the first finding is that inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall, while the other is that the security engineer must decide which severity levels are actively blocked and which are only logged; neither is corrected by the chosen substitutions.

E:

The first action is suitable because a payload analyzer cannot interpret encrypted commands unless the necessary content becomes visible at a trusted point; the second is misdirected because extra visibility does not configure which virtual-patching severities should block a session. At the municipal water-treatment facility, the remaining second gap is that the security engineer must decide which severity levels are actively blocked and which are only logged, even though inspection cannot identify a command in encrypted application traffic because only ciphertext crosses the firewall is covered.

Question 790

A staged deployment for the wastewater pumping station cannot proceed until both conditions are handled: (1) a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; and (2) the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations. Which plan provides the needed control for each finding rather than a superficial substitute?

  1. Deploy network-based IPS or virtual patch protection at the applicable segment boundary; then treat every Modbus packet as equally safe after allowing port 502
  2. Deploy network-based IPS or virtual patch protection at the applicable segment boundary; then design Modbus-aware operation filtering where supported at the control conduit
  3. Install an endpoint detection agent on the unsupported controller firmware; then design Modbus-aware operation filtering where supported at the control conduit
  4. Change the relevant signature action under a tested IPS profile and policy; then design Modbus-aware operation filtering where supported at the control conduit
  5. Install an endpoint detection agent on the unsupported controller firmware; then treat every Modbus packet as equally safe after allowing port 502

Explanation

Correct Answer

B:

The first control fits because inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched; the second fits because Modbus function-level distinctions matter because read and write requests can share one TCP service. Together they resolve the separate findings at the wastewater pumping station: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller, and the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations. This addresses a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller without bypassing the separate requirement that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations.

Incorrect Answers

A:

The first action is suitable because inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched; the second is misdirected because a common transport service does not restrict the embedded function being requested. At the wastewater pumping station, the remaining second gap is that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations, even though a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller is covered.

C:

The second part is useful because Modbus function-level distinctions matter because read and write requests can share one TCP service; however, the first part fails because a legacy PLC may not run a general-purpose endpoint agent and this is not a practical network control. The first gap remains unresolved at the wastewater pumping station: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; the second measure helps with the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations but cannot repair it.

D:

The second action addresses the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations because Modbus function-level distinctions matter because read and write requests can share one TCP service, but the separate first finding still concerns a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller. The proposed first mechanism belongs to a different requirement: an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature; alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path, but despite the valid second control for the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations, it does not resolve the first finding at the wastewater pumping station: a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller.

E:

The first substitution fails because a legacy PLC may not run a general-purpose endpoint agent and this is not a practical network control; the second fails because a common transport service does not restrict the embedded function being requested. For this wastewater pumping station, the first finding is that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller, while the other is that the team sees Modbus/TCP communications and needs to constrain dangerous controller write activity while retaining read operations; neither is corrected by the chosen substitutions.

Fortinet NSE 6 - OT Security 7.6 Architect (NSE6_OTS_AR-7.6) Practice Tests