Fortinet NSE6_OTS_AR-7.6 (Fortinet NSE 6 - OT Security 7.6 Architect) Practice Test 90

Question 890

During a maintenance-window design exercise for the industrial refrigeration installation, the team notes: (1) the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; and (2) a FortiSIEM report is empty even though operators know incidents exist for the same week. Which joint design is aligned with the exact detection and enforcement gaps?

  1. Use only general IT vulnerability totals without industrial asset exposure context; then change the report export format without fixing the event filters
  2. Use only general IT vulnerability totals without industrial asset exposure context; then check the report's selected data source, time range and incident filters
  3. Review the OT Security Risk report and validate its source data and scope; then change the report export format without fixing the event filters
  4. Review the OT Security Risk report and validate its source data and scope; then check the report's selected data source, time range and incident filters

Explanation

Correct Answer

D:

The first control fits because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization; the second fits because reporting queries depend on correctly scoped events and normalized incident data. Together they resolve the separate findings at the industrial refrigeration installation: the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, and a FortiSIEM report is empty even though operators know incidents exist for the same week. This addresses the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene without bypassing the separate requirement that a FortiSIEM report is empty even though operators know incidents exist for the same week.

Incorrect Answers

A:

The first substitution fails because generic IT totals can overlook the exposure and operational consequence of specific controllers; the second fails because export format does not change whether the query selects the underlying incident records. For this industrial refrigeration installation, the first finding is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, while the other is that a FortiSIEM report is empty even though operators know incidents exist for the same week; neither is corrected by the chosen substitutions.

B:

The second part is useful because reporting queries depend on correctly scoped events and normalized incident data; however, the first part fails because generic IT totals can overlook the exposure and operational consequence of specific controllers. The first gap remains unresolved at the industrial refrigeration installation: the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; the second measure helps with a FortiSIEM report is empty even though operators know incidents exist for the same week but cannot repair it.

C:

The first action is suitable because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization; the second is misdirected because export format does not change whether the query selects the underlying incident records. At the industrial refrigeration installation, the remaining second gap is that a FortiSIEM report is empty even though operators know incidents exist for the same week, even though the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene is covered.

Question 891

For the upcoming controlled rollout at the pharmaceutical production floor, the work package includes: (1) the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws; and (2) FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent. Which joint design is aligned with the exact detection and enforcement gaps?

  1. Disable all UTM processing while expecting the same enrichment; then investigate missing profiling attributes before changing the classification
  2. Confirm device identification and necessary security-profile processing for IoT/OT visibility; then mark the device trusted only because its fingerprint is missing
  3. Confirm device identification and necessary security-profile processing for IoT/OT visibility; then investigate missing profiling attributes before changing the classification
  4. Disable all UTM processing while expecting the same enrichment; then mark the device trusted only because its fingerprint is missing

Explanation

Correct Answer

C:

The first control fits because device identity processing and relevant inspected traffic supply asset attributes that enable enriched vulnerability views; the second fits because a missing-data profiling event means the rule lacks evidence for a meaningful comparison. Together they resolve the separate findings at the pharmaceutical production floor: the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws, and FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent. This addresses the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws without bypassing the separate requirement that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent.

Incorrect Answers

A:

The second part is useful because a missing-data profiling event means the rule lacks evidence for a meaningful comparison; however, the first part fails because disabling inspection can remove observations needed to associate assets with vulnerability information. The first gap remains unresolved at the pharmaceutical production floor: the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws; the second measure helps with FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent but cannot repair it.

B:

The first action is suitable because device identity processing and relevant inspected traffic supply asset attributes that enable enriched vulnerability views; the second is misdirected because absence of evidence is not a reliable basis for moving a rogue into a production segment. At the pharmaceutical production floor, the remaining second gap is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent, even though the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws is covered.

D:

The first substitution fails because disabling inspection can remove observations needed to associate assets with vulnerability information; the second fails because absence of evidence is not a reliable basis for moving a rogue into a production segment. For this pharmaceutical production floor, the first finding is that the asset dashboard omits the OT vulnerability context needed for identifying devices with known exploited flaws, while the other is that FortiNAC cannot evaluate a rogue against a rule because the expected DHCP fingerprint is absent; neither is corrected by the chosen substitutions.

Question 892

During a maintenance-window design exercise for the semiconductor fabrication facility, the team notes: (1) a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; and (2) the facility is air-gapped and cannot reach FortiGuard update servers directly. Which combination addresses the required mechanisms at their proper enforcement or observation points?

  1. Remove that unnecessary service from the segment's firewall allowlist; then use supported manual licensing and security package transfer procedures for the offline FortiGate
  2. Rename the unused application sensor in the object list; then open unrestricted Internet access from all controllers for signature downloads
  3. Apply the sensor to the actual matching firewall policy and confirm policy hits; then use supported manual licensing and security package transfer procedures for the offline FortiGate
  4. Apply the sensor to the actual matching firewall policy and confirm policy hits; then open unrestricted Internet access from all controllers for signature downloads
  5. Rename the unused application sensor in the object list; then use supported manual licensing and security package transfer procedures for the offline FortiGate

Explanation

Correct Answer

C:

The first control fits because security profiles act on traffic traversing the enabled policy, not merely on the profile object existing; the second fits because an air-gap deployment needs a controlled update transfer rather than assuming live FortiGuard queries. Together they resolve the separate findings at the semiconductor fabrication facility: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule, and the facility is air-gapped and cannot reach FortiGuard update servers directly. This addresses a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule without bypassing the separate requirement that the facility is air-gapped and cannot reach FortiGuard update servers directly.

Incorrect Answers

A:

The second action addresses the facility is air-gapped and cannot reach FortiGuard update servers directly because an air-gap deployment needs a controlled update transfer rather than assuming live FortiGuard queries, but the separate first finding still concerns a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule. The proposed first mechanism belongs to a different requirement: the OT architect needs to reduce the attack surface of a specific protocol service that is not required by the process; eliminating unneeded permitted services shrinks reachable attack paths independently of signature coverage, but despite the valid second control for the facility is air-gapped and cannot reach FortiGuard update servers directly, it does not resolve the first finding at the semiconductor fabrication facility: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule.

B:

The first substitution fails because naming an unattached profile does not inspect the sessions reaching the plant; the second fails because exposing process devices violates the air-gap requirement and is not required for controlled package updates. For this semiconductor fabrication facility, the first finding is that a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule, while the other is that the facility is air-gapped and cannot reach FortiGuard update servers directly; neither is corrected by the chosen substitutions.

D:

The first action is suitable because security profiles act on traffic traversing the enabled policy, not merely on the profile object existing; the second is misdirected because exposing process devices violates the air-gap requirement and is not required for controlled package updates. At the semiconductor fabrication facility, the remaining second gap is that the facility is air-gapped and cannot reach FortiGuard update servers directly, even though a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule is covered.

E:

The second part is useful because an air-gap deployment needs a controlled update transfer rather than assuming live FortiGuard queries; however, the first part fails because naming an unattached profile does not inspect the sessions reaching the plant. The first gap remains unresolved at the semiconductor fabrication facility: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; the second measure helps with the facility is air-gapped and cannot reach FortiGuard update servers directly but cannot repair it.

Question 893

An automotive assembly line is reviewing three separate OT control failures: first, the OT team cannot tell which industrial asset provided the source IP of a detected threat; second, the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures; and third, an already registered device was classified incorrectly and rerunning rogue rules does not change it. Which THREE individual measures correctly address these distinct failures? Choose THREE.

  1. Assume a default route alone proves OT signature licensing
  2. Run rogue profiling repeatedly without changing registration state
  3. Remove source identity fields from the SIEM ingest pipeline
  4. Associate firewall events with resolved device identity and asset attributes
  5. Manually correct the registered host or reintroduce it into the appropriate classification workflow
  6. Check the Operational Technology Security Service entitlement under FortiGuard subscriptions

Explanation

Correct Answers

D:

At the automotive assembly line, enriched asset-to-IP associations make events actionable for specific controllers instead of only transient addresses; that directly resolves the requirement that the OT team cannot tell which industrial asset provided the source IP of a detected threat; it is evaluated alongside the separate requirement that the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures.

E:

In this automotive assembly line scenario, profiling re-evaluation acts on remaining rogues rather than automatically rewriting every registered inventory object; that directly resolves the requirement that an already registered device was classified incorrectly and rerunning rogue rules does not change it; it is evaluated alongside the separate requirement that the OT team cannot tell which industrial asset provided the source IP of a detected threat.

F:

The relevant technical distinction for the automotive assembly line is that license entitlement governs access to the dedicated OT security signature updates; that directly resolves the requirement that the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures; it is evaluated alongside the separate requirement that an already registered device was classified incorrectly and rerunning rogue rules does not change it.

Incorrect Answers

A:

The mismatch at the automotive assembly line is specific to the observed control requirement: Internet reachability by itself does not activate a subscription that has not been licensed; it leaves unresolved the finding that the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures; the parallel design also has to address an already registered device was classified incorrectly and rerunning rogue rules does not change it.

B:

At the automotive assembly line, this substitutes a measure addressing a different concern: a registered endpoint is outside the ordinary rogue-only re-evaluation scope; it leaves unresolved the finding that an already registered device was classified incorrectly and rerunning rogue rules does not change it; the parallel design also has to address the OT team cannot tell which industrial asset provided the source IP of a detected threat.

C:

At the automotive assembly line, the expected mechanism is absent because discarding device identity prevents analysts from relating alerts to the affected industrial asset; it leaves unresolved the finding that the OT team cannot tell which industrial asset provided the source IP of a detected threat; the parallel design also has to address the administrator must verify whether the dedicated FortiGuard OT signature service is entitled before expecting OT-specific signatures.

Question 894

An overnight review of the municipal water-treatment facility reveals these unrelated but concurrent findings: (1) an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls; and (2) managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. Which plan provides the needed control for each finding rather than a superficial substitute?

  1. Rank treatment using exposure, likelihood, consequence and validated existing controls; then export the firewall's unfiltered current session table once
  2. Assign priority solely from the CVE title's alphabetical order; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  3. Rank treatment using exposure, likelihood, consequence and validated existing controls; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  4. Assign priority solely from the CVE title's alphabetical order; then export the firewall's unfiltered current session table once

Explanation

Correct Answer

C:

The first control fits because risk decisions depend on reachability and operational impact as well as a numerical weakness score; the second fits because reports aggregate retained security data into a repeatable operational review artifact. Together they resolve the separate findings at the municipal water-treatment facility: an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls, and managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. This addresses an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls without bypassing the separate requirement that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs.

Incorrect Answers

A:

The first action is suitable because risk decisions depend on reachability and operational impact as well as a numerical weakness score; the second is misdirected because a one-time active-session snapshot is not a historical threat trend report. At the municipal water-treatment facility, the remaining second gap is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs, even though an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls is covered.

B:

The second part is useful because reports aggregate retained security data into a repeatable operational review artifact; however, the first part fails because the spelling of a vulnerability identifier has no causal relation to plant risk. The first gap remains unresolved at the municipal water-treatment facility: an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls; the second measure helps with managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs but cannot repair it.

D:

The first substitution fails because the spelling of a vulnerability identifier has no causal relation to plant risk; the second fails because a one-time active-session snapshot is not a historical threat trend report. For this municipal water-treatment facility, the first finding is that an OT vulnerability is severe on paper but belongs to an isolated device with compensating controls, while the other is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs; neither is corrected by the chosen substitutions.

Question 895

A plant security engineer at the wastewater pumping station needs a focused remedy because a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller. What is the most targeted response?

  1. Change the relevant signature action under a tested IPS profile and policy
  2. Examine both firewall traffic action logs and security-profile event details
  3. Deploy network-based IPS or virtual patch protection at the applicable segment boundary
  4. Install an endpoint detection agent on the unsupported controller firmware

Explanation

Correct Answer

C:

In this wastewater pumping station scenario, inline network inspection can mitigate selected exploit traffic while leaving the unmodifiable endpoint software untouched; that directly resolves the requirement that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller.

Incorrect Answers

A:

At the wastewater pumping station, this mechanism serves the separate situation where an IPS profile logs detections but the plant's approved response requires blocking a specifically validated malicious signature, whereas the present finding is that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; although alert-only inspection provides visibility whereas a validated block action can stop matched traffic in-path, the required capability remains missing.

B:

At the wastewater pumping station, this mechanism serves the separate situation where investigators must identify whether industrial operations were blocked by policy or by a threat-detection profile, whereas the present finding is that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller; although session policy decisions and IPS or application detections are different observations requiring correlation, the required capability remains missing.

D:

At the wastewater pumping station, this substitutes a measure addressing a different concern: a legacy PLC may not run a general-purpose endpoint agent and this is not a practical network control; it leaves unresolved the finding that a plant wants to contain an exploit on a legacy PLC without installing an agent on the controller.

Question 896

The technical reviewer for the large-scale irrigation installation must select controls for these two findings: (1) a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices; and (2) firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet. Which proposal would pass both acceptance tests with the fewest irrelevant changes?

  1. Publish the controller management ports directly to the Internet; then apply identity-aware firewall rules using the authenticated user group
  2. Use a controlled remote-access termination and a monitored jump host into permitted OT destinations; then apply identity-aware firewall rules using the authenticated user group
  3. Publish the controller management ports directly to the Internet; then authorize every source address in the engineering LAN without authentication
  4. Use a controlled remote-access termination and a monitored jump host into permitted OT destinations; then authorize every source address in the engineering LAN without authentication

Explanation

Correct Answer

B:

The first control fits because brokered privileged access reduces direct exposure and supports session accountability; the second fits because group-scoped authorization links a verified human identity to the permitted network session. Together they resolve the separate findings at the large-scale irrigation installation: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, and firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet. This addresses a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices without bypassing the separate requirement that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet.

Incorrect Answers

A:

The second part is useful because group-scoped authorization links a verified human identity to the permitted network session; however, the first part fails because exposing native device interfaces bypasses the controlled remote-administration boundary. The first gap remains unresolved at the large-scale irrigation installation: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices; the second measure helps with firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet but cannot repair it.

C:

The first substitution fails because exposing native device interfaces bypasses the controlled remote-administration boundary; the second fails because host subnet membership does not prove the user's membership in the maintenance role. For this large-scale irrigation installation, the first finding is that a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, while the other is that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; neither is corrected by the chosen substitutions.

D:

The first action is suitable because brokered privileged access reduces direct exposure and supports session accountability; the second is misdirected because host subnet membership does not prove the user's membership in the maintenance role. At the large-scale irrigation installation, the remaining second gap is that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, even though a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices is covered.

Question 897

A risk register update for the bulk-material handling facility documents the following technical gaps: (1) a basic handler exists but the incident queue remains empty after the intended event fires; and (2) the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. Which combination addresses the required mechanisms at their proper enforcement or observation points?

  1. Increase the handler severity while leaving automatic incident creation disabled; then use only general IT vulnerability totals without industrial asset exposure context
  2. Increase the handler severity while leaving automatic incident creation disabled; then review the OT Security Risk report and validate its source data and scope
  3. Narrow the selected log sources and filtering fields to the relevant OT events; then review the OT Security Risk report and validate its source data and scope
  4. Enable automatic incident creation in the relevant FortiAnalyzer event handler; then review the OT Security Risk report and validate its source data and scope
  5. Enable automatic incident creation in the relevant FortiAnalyzer event handler; then use only general IT vulnerability totals without industrial asset exposure context

Explanation

Correct Answer

D:

The first control fits because FortiAnalyzer can turn qualifying handler events into incidents when the create-incident setting is enabled; the second fits because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization. Together they resolve the separate findings at the bulk-material handling facility: a basic handler exists but the incident queue remains empty after the intended event fires, and the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene. This addresses a basic handler exists but the incident queue remains empty after the intended event fires without bypassing the separate requirement that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene.

Incorrect Answers

A:

The first substitution fails because raising the event severity does not activate the distinct incident-creation switch; the second fails because generic IT totals can overlook the exposure and operational consequence of specific controllers. For this bulk-material handling facility, the first finding is that a basic handler exists but the incident queue remains empty after the intended event fires, while the other is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene; neither is corrected by the chosen substitutions.

B:

The second part is useful because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization; however, the first part fails because raising the event severity does not activate the distinct incident-creation switch. The first gap remains unresolved at the bulk-material handling facility: a basic handler exists but the incident queue remains empty after the intended event fires; the second measure helps with the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene but cannot repair it.

C:

The second action addresses the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene because an OT-focused report frames industrial devices and risks in terms useful for plant-specific prioritization, but the separate first finding still concerns a basic handler exists but the incident queue remains empty after the intended event fires. The proposed first mechanism belongs to a different requirement: a handler fires on unrelated business traffic because its log selection includes the wrong source and subtype; the event handler's data selection and filters determine the events that qualify, but despite the valid second control for the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, it does not resolve the first finding at the bulk-material handling facility: a basic handler exists but the incident queue remains empty after the intended event fires.

E:

The first action is suitable because FortiAnalyzer can turn qualifying handler events into incidents when the create-incident setting is enabled; the second is misdirected because generic IT totals can overlook the exposure and operational consequence of specific controllers. At the bulk-material handling facility, the remaining second gap is that the site needs a view of its industrial cyber exposure rather than only general office endpoint hygiene, even though a basic handler exists but the incident queue remains empty after the intended event fires is covered.

Question 898

At an automotive assembly line, engineers must address both of these documented gaps: (1) the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified; and (2) a registered workstation failed its compliance policy scan but must receive only remediation access. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.

  1. Apply a default-deny inter-zone policy and allow only approved OT flows
  2. Treat every failed posture scan as a successful normal registration
  3. Insert a general all-services allow rule above specific OT rules
  4. Apply FortiNAC forced remediation and the remediation isolation state

Explanation

Correct Answers

A:

For the stated gap at the automotive assembly line, an explicit service allowlist makes unapproved paths fail closed at the routed boundary; that directly resolves the requirement that the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified; it is evaluated alongside the separate requirement that a registered workstation failed its compliance policy scan but must receive only remediation access.

D:

At the automotive assembly line, untrusted registered hosts can be restricted until their compliance posture is corrected; that directly resolves the requirement that a registered workstation failed its compliance policy scan but must receive only remediation access; it is evaluated alongside the separate requirement that the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified.

Incorrect Answers

B:

At the automotive assembly line, the expected mechanism is absent because registration status does not mean a device still meets the required security posture; it leaves unresolved the finding that a registered workstation failed its compliance policy scan but must receive only remediation access; the parallel design also has to address the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified.

C:

At the automotive assembly line, that alternative is insufficient because broad high-priority permission bypasses the intended least-privilege inspection; it leaves unresolved the finding that the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified; the parallel design also has to address a registered workstation failed its compliance policy scan but must receive only remediation access.

Question 899

The asset owner of the mineral processing site wants to correct both of these deficiencies: (1) the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified; and (2) remote engineers must prove a second factor before accessing a restricted OT management service. Which paired action most directly satisfies both findings without introducing an unrelated control change?

  1. Apply a default-deny inter-zone policy and allow only approved OT flows; then require supported multi-factor authentication for the administrative sign-in
  2. Apply a default-deny inter-zone policy and allow only approved OT flows; then depend solely on knowledge of the engineer's IP address
  3. Insert a general all-services allow rule above specific OT rules; then depend solely on knowledge of the engineer's IP address
  4. Insert a general all-services allow rule above specific OT rules; then require supported multi-factor authentication for the administrative sign-in

Explanation

Correct Answer

A:

The first control fits because an explicit service allowlist makes unapproved paths fail closed at the routed boundary; the second fits because a second independent authentication factor reduces reliance on a stolen password for human access. Together they resolve the separate findings at the mineral processing site: the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified, and remote engineers must prove a second factor before accessing a restricted OT management service. This addresses the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified without bypassing the separate requirement that remote engineers must prove a second factor before accessing a restricted OT management service.

Incorrect Answers

B:

The first action is suitable because an explicit service allowlist makes unapproved paths fail closed at the routed boundary; the second is misdirected because network origin is neither an individual identity proof nor a second factor. At the mineral processing site, the remaining second gap is that remote engineers must prove a second factor before accessing a restricted OT management service, even though the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified is covered.

C:

The first substitution fails because broad high-priority permission bypasses the intended least-privilege inspection; the second fails because network origin is neither an individual identity proof nor a second factor. For this mineral processing site, the first finding is that the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified, while the other is that remote engineers must prove a second factor before accessing a restricted OT management service; neither is corrected by the chosen substitutions.

D:

The second part is useful because a second independent authentication factor reduces reliance on a stolen password for human access; however, the first part fails because broad high-priority permission bypasses the intended least-privilege inspection. The first gap remains unresolved at the mineral processing site: the firewall can route between controller and supervisory VLANs but traffic must be denied unless explicitly justified; the second measure helps with remote engineers must prove a second factor before accessing a restricted OT management service but cannot repair it.

Question 900

At an OT architecture workshop covering the district heating plant, the priority items are: (1) the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited; and (2) a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. Which proposal fixes both issues while leaving unrelated OT workloads alone?

  1. Examine policy order and actual policy-hit or traffic logs; then align firewall authorizations with up-to-date user group membership and session handling
  2. Permit every function of the industrial protocol because its TCP port is known; then align firewall authorizations with up-to-date user group membership and session handling
  3. Permit every function of the industrial protocol because its TCP port is known; then leave a permanent all-contractor subnet allow rule as a fallback
  4. Restrict the approved traffic at the correct conduit using protocol-aware controls where available; then align firewall authorizations with up-to-date user group membership and session handling
  5. Restrict the approved traffic at the correct conduit using protocol-aware controls where available; then leave a permanent all-contractor subnet allow rule as a fallback

Explanation

Correct Answer

D:

The first control fits because limiting communications by destination and industrial operation reduces the blast radius of unauthorized commands; the second fits because revocation must be reflected in both identity state and effective policy for the access path. Together they resolve the separate findings at the district heating plant: the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited, and a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. This addresses the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited without bypassing the separate requirement that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access.

Incorrect Answers

A:

The second action addresses a contractor account has been removed from the identity provider but an old local allow rule still provides broad access because revocation must be reflected in both identity state and effective policy for the access path, but the separate first finding still concerns the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited. The proposed first mechanism belongs to a different requirement: analysts must confirm that a firewall rule for an HMI to one PLC is being used rather than a broader earlier rule; FortiGate evaluates the applicable policy and a preceding broad match can shadow a narrow intended rule, but despite the valid second control for a contractor account has been removed from the identity provider but an old local allow rule still provides broad access, it does not resolve the first finding at the district heating plant: the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited.

B:

The second part is useful because revocation must be reflected in both identity state and effective policy for the access path; however, the first part fails because a port-level permit alone does not distinguish safe read operations from dangerous writes. The first gap remains unresolved at the district heating plant: the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited; the second measure helps with a contractor account has been removed from the identity provider but an old local allow rule still provides broad access but cannot repair it.

C:

The first substitution fails because a port-level permit alone does not distinguish safe read operations from dangerous writes; the second fails because an IP-only bypass defeats centralized deprovisioning and least privilege. For this district heating plant, the first finding is that the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited, while the other is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access; neither is corrected by the chosen substitutions.

E:

The first action is suitable because limiting communications by destination and industrial operation reduces the blast radius of unauthorized commands; the second is misdirected because an IP-only bypass defeats centralized deprovisioning and least privilege. At the district heating plant, the remaining second gap is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access, even though the process historian may only initiate read requests to certain controllers and arbitrary writes are prohibited is covered.

Fortinet NSE 6 - OT Security 7.6 Architect (NSE6_OTS_AR-7.6) Practice Tests