Fortinet NSE5_FSW_AD-7.6 (Fortinet NSE 5 - FortiSwitch 7.6 Administrator) Practice Test 13

Question 120

The operational requirement for a managed switch running FortiSwitchOS 7.6 at the campus is to negotiate port bundling with an access device attached to MCLAG peers. Which FortiSwitch choice directly targets it?

  1. Use an active LACP trunk for a dual-homed attachment
  2. Design a three-tier FortiLink stack within supported topologies
  3. Create a switch inter-switch link for FortiLink discovery
  4. Connect FortiGate HA to a FortiLink stack

Explanation

Correct Answer

A:

At this network boundary, LACP identifies and maintains logical members; independent ports are not a substitute for a bundled attachment. The operator can test this claim by the specific check: check LACP actor/partner state on every participating interface.

Incorrect Answers

B:

Compared with the requested “Use an active LACP trunk for a dual-homed attachment” at the campus, this would provide hierarchical aggregation, distribution and access while retaining centralized discovery instead: multiple managed tiers require correctly placed ISLs and MCLAGs where redundancy is needed. At the campus, the operational proof would instead be to check LACP actor/partner state on every participating interface, whereas “Design a three-tier FortiLink stack within supported topologies” is validated by a different test: inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices.

C:

Compared with the requested “Use an active LACP trunk for a dual-homed attachment” at the campus, this would allow managed descendants to be discovered beyond the directly connected switch instead: an ISL carries the FortiLink control reachability across the switch chain. At the campus, the operational proof would instead be to check LACP actor/partner state on every participating interface, whereas “Create a switch inter-switch link for FortiLink discovery” is validated by a different test: examine ISL status and whether the expected descendant switch appears in discovery.

D:

For the campus, “Connect FortiGate HA to a FortiLink stack” is a different type of control from “Use an active LACP trunk for a dual-homed attachment”: a supported HA/FortiLink wiring design provides connectivity to the FortiGate cluster rather than a single appliance. Unlike the requested feature, that setting addresses the need to keep switch management connected when the active FortiGate changes, not the objective to negotiate port bundling with an access device attached to MCLAG peers.

Question 121

An operations log records this activity at the remote depot: use an active LACP trunk for a dual-homed attachment. Which result is specifically attributable to that action?

  1. LACP identifies and maintains logical members; independent ports are not a substitute for a bundled attachment
  2. MCLAG STP awareness coordinates the spanning-tree view of the aggregated downstream attachment
  3. The first pair presents a resilient attachment upstream while serving one or more downstream switches
  4. Two peer FortiSwitch units present an aggregated logical attachment to dual-homed devices

Explanation

Correct Answer

A:

In this deployment, the configured operation is meant to negotiate port bundling with an access device attached to MCLAG peers. The most relevant validation is to check LACP actor/partner state on every participating interface for the equipment at the remote depot.

Incorrect Answers

B:

That behavior applies when engineers “Enable STP-aware MCLAG behavior where required”; the different operation “Use an active LACP trunk for a dual-homed attachment” is intended to negotiate port bundling with an access device attached to MCLAG peers. That different feature is verified by inspect MCLAG-STP settings and bridge information on both peers; for “Use an active LACP trunk for a dual-homed attachment” on a remote FortiSwitch installation, the relevant evidence is to check LACP actor/partner state on every participating interface.

C:

This outcome would be relevant to “Use a first-tier MCLAG peer group” at the remote depot, not the task “Use an active LACP trunk for a dual-homed attachment”; the other task is to aggregate redundant FortiGate-facing connectivity close to the security edge. The action “Use an active LACP trunk for a dual-homed attachment” targets a different result: LACP identifies and maintains logical members; independent ports are not a substitute for a bundled attachment; the proposed alternative would instead be checked by verify both first-tier peers are represented and their shared trunk is synchronized.

D:

That behavior applies when engineers “Build a two-peer MCLAG core”; the different operation “Use an active LACP trunk for a dual-homed attachment” is intended to negotiate port bundling with an access device attached to MCLAG peers. That different feature is verified by verify both peer states and the dual-homed trunk membership in the MCLAG monitor; for “Use an active LACP trunk for a dual-homed attachment” on a remote FortiSwitch installation, the relevant evidence is to check LACP actor/partner state on every participating interface.

Question 122

A deployment review at the lab identifies this objective: provide hierarchical aggregation, distribution and access while retaining centralized discovery. Which FortiSwitch operation should be selected?

  1. Establish redundant interchassis links for MCLAG
  2. Keep MCLAG peer hardware and software aligned
  3. Form a FortiLink-managed switch cascade
  4. Use a second-tier MCLAG pair
  5. Design a three-tier FortiLink stack within supported topologies

Explanation

Correct Answer

E:

For the stated requirement, multiple managed tiers require correctly placed ISLs and MCLAGs where redundancy is needed. The operator can test this claim by the specific check: inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices.

Incorrect Answers

A:

Compared with the requested “Design a three-tier FortiLink stack within supported topologies” at the lab, this would avoid losing the peer relationship when one cross-connect fails instead: the interchassis link communicates peer state; at least two links are recommended for ICL resilience. At the lab, the operational proof would instead be to inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices, whereas “Establish redundant interchassis links for MCLAG” is validated by a different test: check the ICL member status on both switches and verify a remaining path after a member fails.

B:

For the lab, “Keep MCLAG peer hardware and software aligned” is a different type of control from “Design a three-tier FortiLink stack within supported topologies”: Fortinet recommends the same peer model and software version for a supported MCLAG design. Unlike the requested feature, that setting addresses the need to avoid unsupported mismatches in a redundant switch pair, not the objective to provide hierarchical aggregation, distribution and access while retaining centralized discovery.

C:

Compared with the requested “Design a three-tier FortiLink stack within supported topologies” at the lab, this would manage several downstream FortiSwitch units through one upstream connected device instead: an inter-switch link carries discovery and management traffic onward to additional managed switches. At the lab, the operational proof would instead be to inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices, whereas “Form a FortiLink-managed switch cascade” is validated by a different test: inspect the topology tree and confirm downstream serial numbers appear beneath the uplink switch.

D:

Compared with the requested “Design a three-tier FortiLink stack within supported topologies” at the lab, this would preserve redundant distribution to switches deeper in a hierarchical access design instead: a lower tier MCLAG peer group connects with upper-tier switching through approved inter-switch arrangements. At the lab, the operational proof would instead be to inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices, whereas “Use a second-tier MCLAG pair” is validated by a different test: inspect both tier topologies and the cross-tier trunk state during peer-failure testing.

Question 123

An operations log records this activity at the staging rack: design a three-tier FortiLink stack within supported topologies. Which result is specifically attributable to that action?

  1. Multiple managed tiers require correctly placed ISLs and MCLAGs where redundancy is needed
  2. LACP identifies and maintains logical members; independent ports are not a substitute for a bundled attachment
  3. An ISL carries the FortiLink control reachability across the switch chain
  4. A supported HA/FortiLink wiring design provides connectivity to the FortiGate cluster rather than a single appliance

Explanation

Correct Answer

A:

The deciding detail is that the configured operation is meant to provide hierarchical aggregation, distribution and access while retaining centralized discovery. The most relevant validation is to inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices for the equipment at the staging rack.

Incorrect Answers

B:

This outcome would be relevant to “Use an active LACP trunk for a dual-homed attachment” at the staging rack, not the task “Design a three-tier FortiLink stack within supported topologies”; the other task is to negotiate port bundling with an access device attached to MCLAG peers. The action “Design a three-tier FortiLink stack within supported topologies” targets a different result: multiple managed tiers require correctly placed ISLs and MCLAGs where redundancy is needed; the proposed alternative would instead be checked by check LACP actor/partner state on every participating interface.

C:

That behavior applies when engineers “Create a switch inter-switch link for FortiLink discovery”; the different operation “Design a three-tier FortiLink stack within supported topologies” is intended to provide hierarchical aggregation, distribution and access while retaining centralized discovery. That different feature is verified by examine ISL status and whether the expected descendant switch appears in discovery; for “Design a three-tier FortiLink stack within supported topologies” on a standalone FortiSwitch appliance, the relevant evidence is to inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices.

D:

That behavior applies when engineers “Connect FortiGate HA to a FortiLink stack”; the different operation “Design a three-tier FortiLink stack within supported topologies” is intended to provide hierarchical aggregation, distribution and access while retaining centralized discovery. That different feature is verified by test an HA failover and monitor FortiSwitch authorization and control-plane reachability; for “Design a three-tier FortiLink stack within supported topologies” on a standalone FortiSwitch appliance, the relevant evidence is to inspect the complete three-tier FortiSwitch topology and unauthorized downstream devices.

Question 124

A FortiSwitch L3 routing table at the warehouse has four operational routes: 10.2.2.0/24 [distance 90]; 10.2.0.0/16 [distance 40]; 10.0.0.0/8 [distance 10]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.2.2.11? Assume the next hops are all reachable.

  1. 10.0.0.0/8 via VLAN-C (distance 10)
  2. 0.0.0.0/0 via VLAN-D (distance 1)
  3. 10.2.0.0/16 via VLAN-B (distance 40)
  4. 10.2.2.0/24 via VLAN-A (distance 90)

Explanation

Correct Answer

D:

10.2.2.0/24 contains 10.2.2.11 and is the most specific matching route, regardless of a larger numerical distance.

Incorrect Answers

A:

10.0.0.0/8 is a broader route than 10.2.2.0/24; its distance of 10 cannot beat a longer prefix that matches 10.2.2.11.

B:

0.0.0.0/0 is a broader route than 10.2.2.0/24; its distance of 1 cannot beat a longer prefix that matches 10.2.2.11.

C:

10.2.0.0/16 is a broader route than 10.2.2.0/24; its distance of 40 cannot beat a longer prefix that matches 10.2.2.11.

Question 125

A FortiSwitch L3 routing table at the headquarters has four operational routes: 10.9.13.0/24 [distance 30]; 10.9.13.0/24 [distance 80]; 10.9.0.0/16 [distance 5]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.9.13.24? Assume the next hops are all reachable.

  1. 10.9.0.0/16 via VLAN-C (distance 5)
  2. 0.0.0.0/0 via VLAN-D (distance 1)
  3. 10.9.13.0/24 via VLAN-B (distance 80)
  4. 10.9.13.0/24 via VLAN-A (distance 30)

Explanation

Correct Answer

D:

10.9.13.0/24 is a /24 match with distance 30, lower than the competing /24 distance of 80. This selects the preferred route for 10.9.13.24.

Incorrect Answers

A:

10.9.0.0/16 may have a lower distance, but its shorter prefix loses the longest-match comparison for 10.9.13.24.

B:

0.0.0.0/0 may have a lower distance, but its shorter prefix loses the longest-match comparison for 10.9.13.24.

C:

10.9.13.0/24 has the same /24 prefix but distance 80, which is higher than the selected route; both candidates have equal specificity.

Question 126

A FortiSwitch L3 routing table at the hospital wing has four operational routes: 10.16.24.0/24 [distance 90]; 10.16.0.0/16 [distance 40]; 10.0.0.0/8 [distance 10]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.16.24.37? Assume the next hops are all reachable.

  1. 0.0.0.0/0 via VLAN-D (distance 1)
  2. 10.0.0.0/8 via VLAN-C (distance 10)
  3. 10.16.0.0/16 via VLAN-B (distance 40)
  4. 10.16.24.0/24 via VLAN-A (distance 90)

Explanation

Correct Answer

D:

10.16.24.0/24 contains 10.16.24.37 and is the most specific matching route, regardless of a larger numerical distance.

Incorrect Answers

A:

0.0.0.0/0 is a broader route than 10.16.24.0/24; its distance of 1 cannot beat a longer prefix that matches 10.16.24.37.

B:

10.0.0.0/8 is a broader route than 10.16.24.0/24; its distance of 10 cannot beat a longer prefix that matches 10.16.24.37.

C:

10.16.0.0/16 is a broader route than 10.16.24.0/24; its distance of 40 cannot beat a longer prefix that matches 10.16.24.37.

Question 127

A FortiSwitch L3 routing table at the training center has four operational routes: 10.23.35.0/24 [distance 40]; 10.23.35.0/24 [distance 80]; 10.23.0.0/16 [distance 5]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.23.35.50? Assume the next hops are all reachable.

  1. 0.0.0.0/0 via VLAN-D (distance 1)
  2. 10.23.0.0/16 via VLAN-C (distance 5)
  3. 10.23.35.0/24 via VLAN-B (distance 80)
  4. 10.23.35.0/24 via VLAN-A (distance 40)

Explanation

Correct Answer

D:

10.23.35.0/24 is a /24 match with distance 40, lower than the competing /24 distance of 80. This selects the preferred route for 10.23.35.50.

Incorrect Answers

A:

0.0.0.0/0 may have a lower distance, but its shorter prefix loses the longest-match comparison for 10.23.35.50.

B:

10.23.0.0/16 may have a lower distance, but its shorter prefix loses the longest-match comparison for 10.23.35.50.

C:

10.23.35.0/24 has the same /24 prefix but distance 80, which is higher than the selected route; both candidates have equal specificity.

Question 128

A FortiSwitch L3 routing table at the lab has four operational routes: 10.30.46.0/24 [distance 90]; 10.30.0.0/16 [distance 40]; 10.0.0.0/8 [distance 10]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.30.46.63? Assume the next hops are all reachable.

  1. 0.0.0.0/0 via VLAN-D (distance 1)
  2. 10.30.46.0/24 via VLAN-A (distance 90)
  3. 10.0.0.0/8 via VLAN-C (distance 10)
  4. 10.30.0.0/16 via VLAN-B (distance 40)

Explanation

Correct Answer

B:

10.30.46.0/24 contains 10.30.46.63 and is the most specific matching route, regardless of a larger numerical distance.

Incorrect Answers

A:

0.0.0.0/0 is a broader route than 10.30.46.0/24; its distance of 1 cannot beat a longer prefix that matches 10.30.46.63.

C:

10.0.0.0/8 is a broader route than 10.30.46.0/24; its distance of 10 cannot beat a longer prefix that matches 10.30.46.63.

D:

10.30.0.0/16 is a broader route than 10.30.46.0/24; its distance of 40 cannot beat a longer prefix that matches 10.30.46.63.

Question 129

A FortiSwitch L3 routing table at the staging rack has four operational routes: 10.37.57.0/24 [distance 30]; 10.37.57.0/24 [distance 80]; 10.37.0.0/16 [distance 5]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.37.57.76? Assume the next hops are all reachable.

  1. 0.0.0.0/0 via VLAN-D (distance 1)
  2. 10.37.0.0/16 via VLAN-C (distance 5)
  3. 10.37.57.0/24 via VLAN-A (distance 30)
  4. 10.37.57.0/24 via VLAN-B (distance 80)

Explanation

Correct Answer

C:

10.37.57.0/24 is a /24 match with distance 30, lower than the competing /24 distance of 80. This selects the preferred route for 10.37.57.76.

Incorrect Answers

A:

0.0.0.0/0 may have a lower distance, but its shorter prefix loses the longest-match comparison for 10.37.57.76.

B:

10.37.0.0/16 may have a lower distance, but its shorter prefix loses the longest-match comparison for 10.37.57.76.

D:

10.37.57.0/24 has the same /24 prefix but distance 80, which is higher than the selected route; both candidates have equal specificity.

Question 130

A FortiSwitch L3 routing table at the research building has four operational routes: 10.44.68.0/24 [distance 90]; 10.44.0.0/16 [distance 40]; 10.0.0.0/8 [distance 10]; 0.0.0.0/0 [distance 1]. Which entry is used to forward a packet to 10.44.68.89? Assume the next hops are all reachable.

  1. 10.44.68.0/24 via VLAN-A (distance 90)
  2. 0.0.0.0/0 via VLAN-D (distance 1)
  3. 10.44.0.0/16 via VLAN-B (distance 40)
  4. 10.0.0.0/8 via VLAN-C (distance 10)

Explanation

Correct Answer

A:

10.44.68.0/24 contains 10.44.68.89 and is the most specific matching route, regardless of a larger numerical distance.

Incorrect Answers

B:

0.0.0.0/0 is a broader route than 10.44.68.0/24; its distance of 1 cannot beat a longer prefix that matches 10.44.68.89.

C:

10.44.0.0/16 is a broader route than 10.44.68.0/24; its distance of 40 cannot beat a longer prefix that matches 10.44.68.89.

D:

10.0.0.0/8 is a broader route than 10.44.68.0/24; its distance of 10 cannot beat a longer prefix that matches 10.44.68.89.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests