Question 550
The technical reviewer for the wastewater pumping station must select controls for these two findings: (1) a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices; and (2) a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination. Which plan provides the needed control for each finding rather than a superficial substitute?
- Use a controlled remote-access termination and a monitored jump host into permitted OT destinations; then keep resetting the technician's second factor without checking authorization
- Publish the controller management ports directly to the Internet; then keep resetting the technician's second factor without checking authorization
- Use a controlled remote-access termination and a monitored jump host into permitted OT destinations; then inspect the authenticated user's group and matching firewall policy scope
- Design and test appropriate FortiGate high availability for the conduit; then inspect the authenticated user's group and matching firewall policy scope
- Publish the controller management ports directly to the Internet; then inspect the authenticated user's group and matching firewall policy scope
Explanation
Correct Answer
C:The first control fits because brokered privileged access reduces direct exposure and supports session accountability; the second fits because successful authentication does not itself grant every destination and service; authorization is evaluated separately. Together they resolve the separate findings at the wastewater pumping station: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, and a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination. This addresses a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices without bypassing the separate requirement that a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination.
Incorrect Answers
A:The first action is suitable because brokered privileged access reduces direct exposure and supports session accountability; the second is misdirected because factor enrollment does not change a missing destination or service permission. At the wastewater pumping station, the remaining second gap is that a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination, even though a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices is covered.
B:The first substitution fails because exposing native device interfaces bypasses the controlled remote-administration boundary; the second fails because factor enrollment does not change a missing destination or service permission. For this wastewater pumping station, the first finding is that a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices, while the other is that a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination; neither is corrected by the chosen substitutions.
D:The second action addresses a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination because successful authentication does not itself grant every destination and service; authorization is evaluated separately, but the separate first finding still concerns a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices. The proposed first mechanism belongs to a different requirement: a firewall pair protects an essential plant conduit and a single device failure must not become an extended outage; an HA design can preserve a service boundary across appliance faults if session behavior and failover are validated, but despite the valid second control for a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination, it does not resolve the first finding at the wastewater pumping station: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices.
E:The second part is useful because successful authentication does not itself grant every destination and service; authorization is evaluated separately; however, the first part fails because exposing native device interfaces bypasses the controlled remote-administration boundary. The first gap remains unresolved at the wastewater pumping station: a contractor requires short-lived access to OT but must not receive direct reachability from unmanaged external devices; the second measure helps with a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination but cannot repair it.
Question 551
An audit at the airport baggage control system finds that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users. What is the most targeted response?
- Replace user association with a static source-IP allowlist
- Require supported multi-factor authentication for the administrative sign-in
- Apply identity-aware firewall rules using the authenticated user group
- Evaluate Fortinet single sign-on integration and user-to-IP mappings
Explanation
Correct Answer
D:The relevant technical distinction for the airport baggage control system is that FSSO can make identity associations available to firewall policy when the identity source and mapping are trusted; that directly resolves the requirement that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users.
Incorrect Answers
A:The mismatch at the airport baggage control system is specific to the observed control requirement: a reusable workstation address does not reliably identify the person currently signed in; it leaves unresolved the finding that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users.
B:At the airport baggage control system, this mechanism serves the separate situation where remote engineers must prove a second factor before accessing a restricted OT management service, whereas the present finding is that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users; although a second independent authentication factor reduces reliance on a stolen password for human access, the required capability remains missing.
C:At the airport baggage control system, this mechanism serves the separate situation where firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, whereas the present finding is that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users; although group-scoped authorization links a verified human identity to the permitted network session, the required capability remains missing.
Question 552
An industrial network audit at the automotive assembly line establishes two requirements: (1) the SOC receives too many low-confidence industrial IPS matches on a fragile production segment; and (2) an OPC UA telemetry server must serve selected clients but no other production hosts. Which combination addresses the required mechanisms at their proper enforcement or observation points?
- Tune relevant signatures using evidence and staged monitoring before changing actions; then permit arbitrary inbound sessions to all OPC UA endpoints
- Disable all industrial IPS inspection permanently; then permit arbitrary inbound sessions to all OPC UA endpoints
- Disable all industrial IPS inspection permanently; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
- Tune relevant signatures using evidence and staged monitoring before changing actions; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
Explanation
Correct Answer
D:The first control fits because narrowly targeted tuning can lower false positives without disabling unrelated protective coverage; the second fits because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure. Together they resolve the separate findings at the automotive assembly line: the SOC receives too many low-confidence industrial IPS matches on a fragile production segment, and an OPC UA telemetry server must serve selected clients but no other production hosts. This addresses the SOC receives too many low-confidence industrial IPS matches on a fragile production segment without bypassing the separate requirement that an OPC UA telemetry server must serve selected clients but no other production hosts.
Incorrect Answers
A:The first action is suitable because narrowly targeted tuning can lower false positives without disabling unrelated protective coverage; the second is misdirected because open access disregards the intended client and server trust boundary. At the automotive assembly line, the remaining second gap is that an OPC UA telemetry server must serve selected clients but no other production hosts, even though the SOC receives too many low-confidence industrial IPS matches on a fragile production segment is covered.
B:The first substitution fails because global disablement discards protection against other exploit classes along with the noisy match; the second fails because open access disregards the intended client and server trust boundary. For this automotive assembly line, the first finding is that the SOC receives too many low-confidence industrial IPS matches on a fragile production segment, while the other is that an OPC UA telemetry server must serve selected clients but no other production hosts; neither is corrected by the chosen substitutions.
C:The second part is useful because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure; however, the first part fails because global disablement discards protection against other exploit classes along with the noisy match. The first gap remains unresolved at the automotive assembly line: the SOC receives too many low-confidence industrial IPS matches on a fragile production segment; the second measure helps with an OPC UA telemetry server must serve selected clients but no other production hosts but cannot repair it.
Question 553
A staged deployment for the bulk-material handling facility cannot proceed until both conditions are handled: (1) planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network; and (2) a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface. Which paired configuration should be included in the approved OT security change?
- Identify time-critical controllers and field devices and prefer passive discovery initially; then enable only historical traffic-log report scheduling
- Record sensors, actuators, PLCs and supervisory components by operational role; then enable device identification on the relevant FortiGate LAN interface
- Identify time-critical controllers and field devices and prefer passive discovery initially; then enable device identification on the relevant FortiGate LAN interface
- Run unrestricted vulnerability scans on every field controller during production; then enable device identification on the relevant FortiGate LAN interface
- Run unrestricted vulnerability scans on every field controller during production; then enable only historical traffic-log report scheduling
Explanation
Correct Answer
C:The first control fits because controllers and field equipment can have strict latency and availability constraints that make intrusive discovery inappropriate; the second fits because interface-level device-identification allows passive gathering of identity information from observed devices. Together they resolve the separate findings at the bulk-material handling facility: planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network, and a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface. This addresses planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network without bypassing the separate requirement that a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface.
Incorrect Answers
A:The first action is suitable because controllers and field equipment can have strict latency and availability constraints that make intrusive discovery inappropriate; the second is misdirected because reports summarize recorded traffic but do not activate interface-based device identification. At the bulk-material handling facility, the remaining second gap is that a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface, even though planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network is covered.
B:The second action addresses a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface because interface-level device-identification allows passive gathering of identity information from observed devices, but the separate first finding still concerns planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network. The proposed first mechanism belongs to a different requirement: a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization; recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis, but despite the valid second control for a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface, it does not resolve the first finding at the bulk-material handling facility: planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network.
D:The second part is useful because interface-level device-identification allows passive gathering of identity information from observed devices; however, the first part fails because indiscriminate active probing can disrupt legacy or timing-sensitive industrial endpoints. The first gap remains unresolved at the bulk-material handling facility: planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network; the second measure helps with a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface but cannot repair it.
E:The first substitution fails because indiscriminate active probing can disrupt legacy or timing-sensitive industrial endpoints; the second fails because reports summarize recorded traffic but do not activate interface-based device identification. For this bulk-material handling facility, the first finding is that planners must identify the most safety-sensitive elements before authorizing active security probing of an OT network, while the other is that a FortiGate LAN interface sees OT hosts but device identity collection is disabled on that interface; neither is corrected by the chosen substitutions.
Question 554
At a district water pumping plant, engineers must address both of these documented gaps: (1) an OPC UA telemetry server must serve selected clients but no other production hosts; and (2) automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.
- Quarantine every controller on its first informational signature match
- Gate isolation actions with confidence, asset criticality and operations approval
- Restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
- Permit arbitrary inbound sessions to all OPC UA endpoints
Explanation
Correct Answers
B:At the district water pumping plant, OT response automation needs safeguards so ambiguous detections do not unnecessarily stop control functions; that directly resolves the requirement that automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC; it is evaluated alongside the separate requirement that an OPC UA telemetry server must serve selected clients but no other production hosts.
C:For the stated gap at the district water pumping plant, restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure; that directly resolves the requirement that an OPC UA telemetry server must serve selected clients but no other production hosts; it is evaluated alongside the separate requirement that automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC.
Incorrect Answers
A:At the district water pumping plant, the expected mechanism is absent because unconditional isolation can create unsafe availability consequences from false positives; it leaves unresolved the finding that automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC; the parallel design also has to address an OPC UA telemetry server must serve selected clients but no other production hosts.
D:At the district water pumping plant, that alternative is insufficient because open access disregards the intended client and server trust boundary; it leaves unresolved the finding that an OPC UA telemetry server must serve selected clients but no other production hosts; the parallel design also has to address automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC.
Question 555
At an OT architecture workshop covering the rail signaling depot, the priority items are: (1) a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop; and (2) a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. Which plan provides the needed control for each finding rather than a superficial substitute?
- Enable deep inspection on production links without a validation window; then align firewall authorizations with up-to-date user group membership and session handling
- Enable deep inspection on production links without a validation window; then leave a permanent all-contractor subnet allow rule as a fallback
- Measure latency and failover effects in a representative OT test before introducing inline enforcement; then align firewall authorizations with up-to-date user group membership and session handling
- Measure latency and failover effects in a representative OT test before introducing inline enforcement; then leave a permanent all-contractor subnet allow rule as a fallback
Explanation
Correct Answer
C:The first control fits because control-loop timing and deterministic availability must be assessed when changing industrial Ethernet forwarding; the second fits because revocation must be reflected in both identity state and effective policy for the access path. Together they resolve the separate findings at the rail signaling depot: a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop, and a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. This addresses a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop without bypassing the separate requirement that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access.
Incorrect Answers
A:The second part is useful because revocation must be reflected in both identity state and effective policy for the access path; however, the first part fails because untested inspection can introduce behavior that the real-time controller network cannot tolerate. The first gap remains unresolved at the rail signaling depot: a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop; the second measure helps with a contractor account has been removed from the identity provider but an old local allow rule still provides broad access but cannot repair it.
B:The first substitution fails because untested inspection can introduce behavior that the real-time controller network cannot tolerate; the second fails because an IP-only bypass defeats centralized deprovisioning and least privilege. For this rail signaling depot, the first finding is that a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop, while the other is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access; neither is corrected by the chosen substitutions.
D:The first action is suitable because control-loop timing and deterministic availability must be assessed when changing industrial Ethernet forwarding; the second is misdirected because an IP-only bypass defeats centralized deprovisioning and least privilege. At the rail signaling depot, the remaining second gap is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access, even though a legacy automation link carries time-sensitive control frames and planners propose inserting an untested inspection hop is covered.
Question 556
An audit at the cement kiln control room finds that a rogue device has an IP address and multiple profiling rules might match different attributes. The proposed shortcut is to assume rule names are evaluated in alphabetical order. Which alternative should the architect approve instead?
- Assume rule names are evaluated in alphabetical order
- Maintain the endpoint in FortiNAC Host View with appropriate user association
- Review the ranking and specificity of enabled device profiling rules
- Use FortiNAC inventory representation with connection-status monitoring
Explanation
Correct Answer
C:In this cement kiln control room scenario, FortiNAC evaluates eligible rules by rank so precedence affects the first matching classification; that directly resolves the requirement that a rogue device has an IP address and multiple profiling rules might match different attributes.
Incorrect Answers
A:At the cement kiln control room, this substitutes a measure addressing a different concern: rule descriptions do not supersede the configured profiling rule rank; it leaves unresolved the finding that a rogue device has an IP address and multiple profiling rules might match different attributes.
B:At the cement kiln control room, this mechanism serves the separate situation where the plant must preserve the identity and connection history of a registered technician workstation for access investigations, whereas the present finding is that a rogue device has an IP address and multiple profiling rules might match different attributes; although Host View preserves host and connection context needed for accountability and access workflows, the required capability remains missing.
D:At the cement kiln control room, this mechanism serves the separate situation where operators need a record of a discovered switch-connected industrial device and whether it is currently reachable, whereas the present finding is that a rogue device has an IP address and multiple profiling rules might match different attributes; although device inventory is suitable for managed asset presence and polling rather than only user-associated host history, the required capability remains missing.
Question 557
During a maintenance-window design exercise for the large-scale irrigation installation, the team notes: (1) a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations; and (2) a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization. Which paired configuration should be included in the approved OT security change?
- Identify applicable BES Cyber Systems and evaluate relevant NERC CIP requirements; then record sensors, actuators, PLCs and supervisory components by operational role
- Use only a general IT security score without identifying BES Cyber Systems; then classify all equipment as interchangeable Ethernet endpoints
- Use only a general IT security score without identifying BES Cyber Systems; then record sensors, actuators, PLCs and supervisory components by operational role
- Define zone-specific security requirements and assess the conduits connecting them; then record sensors, actuators, PLCs and supervisory components by operational role
- Identify applicable BES Cyber Systems and evaluate relevant NERC CIP requirements; then classify all equipment as interchangeable Ethernet endpoints
Explanation
Correct Answer
A:The first control fits because applicability and asset classification determine which NERC CIP safeguards must be assessed for the electric utility; the second fits because recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis. Together they resolve the separate findings at the large-scale irrigation installation: a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations, and a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization. This addresses a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations without bypassing the separate requirement that a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization.
Incorrect Answers
B:The first substitution fails because a general security score cannot determine which electric-sector systems and obligations apply; the second fails because a generic network label obscures who senses, controls or merely displays industrial processes. For this large-scale irrigation installation, the first finding is that a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations, while the other is that a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization; neither is corrected by the chosen substitutions.
C:The second part is useful because recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis; however, the first part fails because a general security score cannot determine which electric-sector systems and obligations apply. The first gap remains unresolved at the large-scale irrigation installation: a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations; the second measure helps with a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization but cannot repair it.
D:The second action addresses a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization because recognizing field measurement, physical actuation, controller logic and supervisory functions is essential to impact analysis, but the separate first finding still concerns a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations. The proposed first mechanism belongs to a different requirement: the compliance workshop asks for a documented risk-based control approach to OT system security under ISA/IEC 62443; ISA/IEC 62443 promotes risk-informed partitioning and explicitly governed communications across trust boundaries, but despite the valid second control for a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization, it does not resolve the first finding at the large-scale irrigation installation: a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations.
E:The first action is suitable because applicability and asset classification determine which NERC CIP safeguards must be assessed for the electric utility; the second is misdirected because a generic network label obscures who senses, controls or merely displays industrial processes. At the large-scale irrigation installation, the remaining second gap is that a new inventory fails to distinguish field sensing equipment from devices executing logic and supervisory visualization, even though a North American electric utility needs to relate its cyber-system inventory and perimeter protections to the applicable NERC CIP obligations is covered.
Question 558
The controls engineer and SOC analyst for the petrochemical blending plant must jointly address the following: (1) assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement; and (2) multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data. What two-part implementation is the most precise response to the stated requirements?
- Document switch-port asset labels without defining inter-zone policies; then keep FortiGate, FortiNAC and analytics observations entirely siloed
- Group systems into security zones and document controlled conduits between them; then integrate Fortinet Security Fabric telemetry and inventory across the OT boundary
- Document switch-port asset labels without defining inter-zone policies; then integrate Fortinet Security Fabric telemetry and inventory across the OT boundary
- Group systems into security zones and document controlled conduits between them; then keep FortiGate, FortiNAC and analytics observations entirely siloed
Explanation
Correct Answer
B:The first control fits because comparable security requirements belong in zones and the inter-zone paths need separately governed conduits; the second fits because correlation of FortiGate enforcement, device identity and analytics observations supports a coordinated OT security view. Together they resolve the separate findings at the petrochemical blending plant: assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement, and multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data. This addresses assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement without bypassing the separate requirement that multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data.
Incorrect Answers
A:The first substitution fails because switch-port documentation alone cannot establish zone trust or govern the path between different risk groups; the second fails because independent records prevent the cross-product context needed for coordinated classification and response. For this petrochemical blending plant, the first finding is that assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement, while the other is that multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data; neither is corrected by the chosen substitutions.
C:The second part is useful because correlation of FortiGate enforcement, device identity and analytics observations supports a coordinated OT security view; however, the first part fails because switch-port documentation alone cannot establish zone trust or govern the path between different risk groups. The first gap remains unresolved at the petrochemical blending plant: assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement; the second measure helps with multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data but cannot repair it.
D:The first action is suitable because comparable security requirements belong in zones and the inter-zone paths need separately governed conduits; the second is misdirected because independent records prevent the cross-product context needed for coordinated classification and response. At the petrochemical blending plant, the remaining second gap is that multiple Fortinet components provide partial OT visibility but incidents cannot be related across firewall, asset and analytics data, even though assets with unlike safety and trust requirements are treated as a single flat security group despite an ISA/IEC 62443 zone-and-conduit design requirement is covered.
Question 559
An OT architect reviewing the cold-storage automation plant observes two independent gaps: (1) the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile; and (2) automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC. Which two measures correctly map to the operational and security requirements?
- Enable only traffic logging while leaving IPS disabled; then gate isolation actions with confidence, asset criticality and operations approval
- Enable a suitable IPS security profile on the conduit firewall policy; then gate isolation actions with confidence, asset criticality and operations approval
- Enable only traffic logging while leaving IPS disabled; then quarantine every controller on its first informational signature match
- Enable a suitable IPS security profile on the conduit firewall policy; then quarantine every controller on its first informational signature match
- Apply the sensor to the actual matching firewall policy and confirm policy hits; then gate isolation actions with confidence, asset criticality and operations approval
Explanation
Correct Answer
B:The first control fits because the dedicated OT attack definitions are used by IPS inspection when the service is valid and policy is configured; the second fits because OT response automation needs safeguards so ambiguous detections do not unnecessarily stop control functions. Together they resolve the separate findings at the cold-storage automation plant: the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile, and automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC. This addresses the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile without bypassing the separate requirement that automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC.
Incorrect Answers
A:The second part is useful because OT response automation needs safeguards so ambiguous detections do not unnecessarily stop control functions; however, the first part fails because recording session metadata does not cause threat signatures to be evaluated. The first gap remains unresolved at the cold-storage automation plant: the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile; the second measure helps with automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC but cannot repair it.
C:The first substitution fails because recording session metadata does not cause threat signatures to be evaluated; the second fails because unconditional isolation can create unsafe availability consequences from false positives. For this cold-storage automation plant, the first finding is that the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile, while the other is that automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC; neither is corrected by the chosen substitutions.
D:The first action is suitable because the dedicated OT attack definitions are used by IPS inspection when the service is valid and policy is configured; the second is misdirected because unconditional isolation can create unsafe availability consequences from false positives. At the cold-storage automation plant, the remaining second gap is that automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC, even though the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile is covered.
E:The second action addresses automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC because OT response automation needs safeguards so ambiguous detections do not unnecessarily stop control functions, but the separate first finding still concerns the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile. The proposed first mechanism belongs to a different requirement: a policy has an OT application sensor configured but traffic is governed by a different matching firewall rule; security profiles act on traffic traversing the enabled policy, not merely on the profile object existing, but despite the valid second control for automatic quarantine could interrupt production safety if every low-severity alert directly isolates a PLC, it does not resolve the first finding at the cold-storage automation plant: the plant wants OT signatures to inspect a controller conduit but the policy has no active IPS profile.
Question 560
At a food-processing factory, engineers must address both of these documented gaps: (1) the security engineer must decide which severity levels are actively blocked and which are only logged; and (2) a suspected compromised maintenance laptop must be contained while continuing operation of fixed safety controllers. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.
- Define and test the severity and action choices within a virtual patching profile
- Increase traffic logging while leaving virtual-patching severity actions unchanged
- Disconnect the complete PLC subnet in response to one laptop alert
- Target the affected noncritical endpoint through FortiNAC or policy-based access restriction
Explanation
Correct Answers
A:The relevant technical distinction for the food-processing factory is that profile-level action and severity selections set which matched mitigations are enforced versus observed; that directly resolves the requirement that the security engineer must decide which severity levels are actively blocked and which are only logged; it is evaluated alongside the separate requirement that a suspected compromised maintenance laptop must be contained while continuing operation of fixed safety controllers.
D:In this food-processing factory scenario, containment should act on the identified workstation rather than remove an entire safety-critical control cell; that directly resolves the requirement that a suspected compromised maintenance laptop must be contained while continuing operation of fixed safety controllers; it is evaluated alongside the separate requirement that the security engineer must decide which severity levels are actively blocked and which are only logged.
Incorrect Answers
B:The mismatch at the food-processing factory is specific to the observed control requirement: extra visibility does not configure which virtual-patching severities should block a session; it leaves unresolved the finding that the security engineer must decide which severity levels are actively blocked and which are only logged; the parallel design also has to address a suspected compromised maintenance laptop must be contained while continuing operation of fixed safety controllers.
C:At the food-processing factory, this substitutes a measure addressing a different concern: subnet-wide isolation sacrifices unrelated process availability and exceeds the identified blast radius; it leaves unresolved the finding that a suspected compromised maintenance laptop must be contained while continuing operation of fixed safety controllers; the parallel design also has to address the security engineer must decide which severity levels are actively blocked and which are only logged.