Fortinet NSE6_OTS_AR-7.6 (Fortinet NSE 6 - OT Security 7.6 Architect) Practice Test 65

Question 640

During a scheduled commissioning review at a municipal water-treatment facility, (1) analysts need to preserve a selected OT incident with its investigation context for a handover; and (2) a security team wants evidence related to its baseline CIS Controls implementation. Which proposal fixes both issues while leaving unrelated OT workloads alone?

  1. Use the supported incident export capability and retain relevant case evidence; then interpret an antivirus signature count as a CIS compliance certificate
  2. Send an incident-count summary without the underlying case event details; then interpret an antivirus signature count as a CIS compliance certificate
  3. Send an incident-count summary without the underlying case event details; then use the appropriate CIS Controls Security Rating report and review its underlying checks
  4. Use the supported incident export capability and retain relevant case evidence; then use the appropriate CIS Controls Security Rating report and review its underlying checks

Explanation

Correct Answer

D:

The first control fits because exporting an incident allows accountable transfer without relying on an ephemeral dashboard view; the second fits because CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance. Together they resolve the separate findings at the municipal water-treatment facility: analysts need to preserve a selected OT incident with its investigation context for a handover, and a security team wants evidence related to its baseline CIS Controls implementation. This addresses analysts need to preserve a selected OT incident with its investigation context for a handover without bypassing the separate requirement that a security team wants evidence related to its baseline CIS Controls implementation.

Incorrect Answers

A:

The first action is suitable because exporting an incident allows accountable transfer without relying on an ephemeral dashboard view; the second is misdirected because update counts do not assess all of the control areas needed for a security rating. At the municipal water-treatment facility, the remaining second gap is that a security team wants evidence related to its baseline CIS Controls implementation, even though analysts need to preserve a selected OT incident with its investigation context for a handover is covered.

B:

The first substitution fails because aggregate totals cannot preserve the event context and supporting evidence required in a handover; the second fails because update counts do not assess all of the control areas needed for a security rating. For this municipal water-treatment facility, the first finding is that analysts need to preserve a selected OT incident with its investigation context for a handover, while the other is that a security team wants evidence related to its baseline CIS Controls implementation; neither is corrected by the chosen substitutions.

C:

The second part is useful because CIS-aligned ratings summarize the evaluated security controls rather than proving unrestricted compliance; however, the first part fails because aggregate totals cannot preserve the event context and supporting evidence required in a handover. The first gap remains unresolved at the municipal water-treatment facility: analysts need to preserve a selected OT incident with its investigation context for a handover; the second measure helps with a security team wants evidence related to its baseline CIS Controls implementation but cannot repair it.

Question 641

An OT architect reviewing the solar power operations center observes two independent gaps: (1) the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered; and (2) IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. Which proposal would pass both acceptance tests with the fewest irrelevant changes?

  1. Correlate application-control identification with IPS threat events; then expose IEC 104 services to any routable corporate address
  2. Enable appropriate industrial-protocol IPS inspection on the matching FortiGate policy; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
  3. Interpret every application identification log as proof of a compromise; then expose IEC 104 services to any routable corporate address
  4. Interpret every application identification log as proof of a compromise; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
  5. Correlate application-control identification with IPS threat events; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers

Explanation

Correct Answer

E:

The first control fits because application detection describes the traffic type while IPS alerts indicate a matching malicious pattern; the second fits because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface. Together they resolve the separate findings at the solar power operations center: the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered, and IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. This addresses the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered without bypassing the separate requirement that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries.

Incorrect Answers

A:

The first action is suitable because application detection describes the traffic type while IPS alerts indicate a matching malicious pattern; the second is misdirected because broad routed availability violates the small set of approved SCADA relationships. At the solar power operations center, the remaining second gap is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, even though the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered is covered.

B:

The second action addresses IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface, but the separate first finding still concerns the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered. The proposed first mechanism belongs to a different requirement: the firewall permits an industrial TCP port but a malicious operation within that protocol remains undetected; an OT-aware IPS signature can evaluate malicious commands or exploit patterns beyond just the transport port, but despite the valid second control for IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, it does not resolve the first finding at the solar power operations center: the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered.

C:

The first substitution fails because normal identified industrial traffic is not equivalent to a detected attack; the second fails because broad routed availability violates the small set of approved SCADA relationships. For this solar power operations center, the first finding is that the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered, while the other is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries; neither is corrected by the chosen substitutions.

D:

The second part is useful because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface; however, the first part fails because normal identified industrial traffic is not equivalent to a detected attack. The first gap remains unresolved at the solar power operations center: the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered; the second measure helps with IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries but cannot repair it.

Question 642

The asset owner of the semiconductor fabrication facility wants to correct both of these deficiencies: (1) controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure; and (2) a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. Which proposal would pass both acceptance tests with the fewest irrelevant changes?

  1. Document MAC/VLAN boundaries separately from routed policy conduits; then leave a permanent all-contractor subnet allow rule as a fallback
  2. Treat the existing VLAN tags as sufficient to authorize all routed services; then align firewall authorizations with up-to-date user group membership and session handling
  3. Treat the existing VLAN tags as sufficient to authorize all routed services; then leave a permanent all-contractor subnet allow rule as a fallback
  4. Document MAC/VLAN boundaries separately from routed policy conduits; then align firewall authorizations with up-to-date user group membership and session handling

Explanation

Correct Answer

D:

The first control fits because switching domains and layer-three enforcement are different constructs that must both be represented in the design; the second fits because revocation must be reflected in both identity state and effective policy for the access path. Together they resolve the separate findings at the semiconductor fabrication facility: controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure, and a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. This addresses controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure without bypassing the separate requirement that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access.

Incorrect Answers

A:

The first action is suitable because switching domains and layer-three enforcement are different constructs that must both be represented in the design; the second is misdirected because an IP-only bypass defeats centralized deprovisioning and least privilege. At the semiconductor fabrication facility, the remaining second gap is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access, even though controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure is covered.

B:

The second part is useful because revocation must be reflected in both identity state and effective policy for the access path; however, the first part fails because tagging expresses layer-two membership but does not specify permitted layer-three connections. The first gap remains unresolved at the semiconductor fabrication facility: controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure; the second measure helps with a contractor account has been removed from the identity provider but an old local allow rule still provides broad access but cannot repair it.

C:

The first substitution fails because tagging expresses layer-two membership but does not specify permitted layer-three connections; the second fails because an IP-only bypass defeats centralized deprovisioning and least privilege. For this semiconductor fabrication facility, the first finding is that controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure, while the other is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access; neither is corrected by the chosen substitutions.

Question 643

During a maintenance-window design exercise for the large-scale irrigation installation, the team notes: (1) an OPC UA telemetry server must serve selected clients but no other production hosts; and (2) a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs. Which proposal would pass both acceptance tests with the fewest irrelevant changes?

  1. Restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness; then rely on a monthly static report as the only response trigger
  2. Restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness; then connect a validated event handler to a controlled automation response
  3. Permit arbitrary inbound sessions to all OPC UA endpoints; then connect a validated event handler to a controlled automation response
  4. Permit arbitrary inbound sessions to all OPC UA endpoints; then rely on a monthly static report as the only response trigger

Explanation

Correct Answer

B:

The first control fits because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure; the second fits because event-driven response can feed an approved containment action from the detection context. Together they resolve the separate findings at the large-scale irrigation installation: an OPC UA telemetry server must serve selected clients but no other production hosts, and a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs. This addresses an OPC UA telemetry server must serve selected clients but no other production hosts without bypassing the separate requirement that a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs.

Incorrect Answers

A:

The first action is suitable because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure; the second is misdirected because scheduled historical reporting does not provide event-driven containment. At the large-scale irrigation installation, the remaining second gap is that a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs, even though an OPC UA telemetry server must serve selected clients but no other production hosts is covered.

C:

The second part is useful because event-driven response can feed an approved containment action from the detection context; however, the first part fails because open access disregards the intended client and server trust boundary. The first gap remains unresolved at the large-scale irrigation installation: an OPC UA telemetry server must serve selected clients but no other production hosts; the second measure helps with a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs but cannot repair it.

D:

The first substitution fails because open access disregards the intended client and server trust boundary; the second fails because scheduled historical reporting does not provide event-driven containment. For this large-scale irrigation installation, the first finding is that an OPC UA telemetry server must serve selected clients but no other production hosts, while the other is that a FortiAnalyzer OT detection must trigger a predefined review or quarantine workflow without a human manually exporting logs; neither is corrected by the chosen substitutions.

Question 644

A post-installation check at the building-management control network finds two outstanding configuration gaps: (1) controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure; and (2) firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet. Which plan provides the needed control for each finding rather than a superficial substitute?

  1. Treat the existing VLAN tags as sufficient to authorize all routed services; then authorize every source address in the engineering LAN without authentication
  2. Treat the existing VLAN tags as sufficient to authorize all routed services; then apply identity-aware firewall rules using the authenticated user group
  3. Document MAC/VLAN boundaries separately from routed policy conduits; then apply identity-aware firewall rules using the authenticated user group
  4. Document MAC/VLAN boundaries separately from routed policy conduits; then authorize every source address in the engineering LAN without authentication

Explanation

Correct Answer

C:

The first control fits because switching domains and layer-three enforcement are different constructs that must both be represented in the design; the second fits because group-scoped authorization links a verified human identity to the permitted network session. Together they resolve the separate findings at the building-management control network: controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure, and firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet. This addresses controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure without bypassing the separate requirement that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet.

Incorrect Answers

A:

The first substitution fails because tagging expresses layer-two membership but does not specify permitted layer-three connections; the second fails because host subnet membership does not prove the user's membership in the maintenance role. For this building-management control network, the first finding is that controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure, while the other is that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; neither is corrected by the chosen substitutions.

B:

The second part is useful because group-scoped authorization links a verified human identity to the permitted network session; however, the first part fails because tagging expresses layer-two membership but does not specify permitted layer-three connections. The first gap remains unresolved at the building-management control network: controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure; the second measure helps with firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet but cannot repair it.

D:

The first action is suitable because switching domains and layer-three enforcement are different constructs that must both be represented in the design; the second is misdirected because host subnet membership does not prove the user's membership in the maintenance role. At the building-management control network, the remaining second gap is that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, even though controls engineers need to identify which flows must remain routable while preserving the existing layer-two broadcast structure is covered.

Question 645

The district water pumping plant is preparing a controlled rollout. One outstanding requirement is that an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription. The proposed shortcut is to update the generic IPS definitions without checking the separate OT entitlement. Which alternative should the architect approve instead?

  1. Configure a suitable FortiGate application control sensor on the observed policy
  2. Enable appropriate industrial-protocol IPS inspection on the matching FortiGate policy
  3. Verify the relevant FortiGuard OT Security Service license before relying on the package
  4. Update the generic IPS definitions without checking the separate OT entitlement

Explanation

Correct Answer

C:

The relevant technical distinction for the district water pumping plant is that dedicated OT definitions depend on service entitlement as well as successful distribution and applied inspection; that directly resolves the requirement that an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription.

Incorrect Answers

A:

At the district water pumping plant, this mechanism serves the separate situation where security must recognize industrial application traffic even when it uses nonstandard transport ports, whereas the present finding is that an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription; although application identification uses protocol decoders and signatures rather than trusting port numbers alone, the required capability remains missing.

B:

At the district water pumping plant, this mechanism serves the separate situation where the firewall permits an industrial TCP port but a malicious operation within that protocol remains undetected, whereas the present finding is that an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription; although an OT-aware IPS signature can evaluate malicious commands or exploit patterns beyond just the transport port, the required capability remains missing.

D:

The mismatch at the district water pumping plant is specific to the observed control requirement: generic IPS updates cannot substitute for an unlicensed dedicated OT signature package; it leaves unresolved the finding that an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription.

Question 646

The asset owner of the hydroelectric generation site wants to correct both of these deficiencies: (1) a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; and (2) the production VLAN should change according to the registered host's assigned industrial role. Which two measures correctly map to the operational and security requirements?

  1. Allow the whole technician VLAN to connect to all controllers permanently; then assign every registered host to the same unrestricted VLAN
  2. Allow the whole technician VLAN to connect to all controllers permanently; then apply FortiNAC role-based network access or matching network access policies
  3. Authorize a source-, destination- and service-specific time-bounded firewall policy; then apply FortiNAC role-based network access or matching network access policies
  4. Authorize a source-, destination- and service-specific time-bounded firewall policy; then assign every registered host to the same unrestricted VLAN

Explanation

Correct Answer

C:

The first control fits because narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task; the second fits because the device or host role can drive the resulting VLAN instead of a single shared access state. Together they resolve the separate findings at the hydroelectric generation site: a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet, and the production VLAN should change according to the registered host's assigned industrial role. This addresses a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet without bypassing the separate requirement that the production VLAN should change according to the registered host's assigned industrial role.

Incorrect Answers

A:

The first substitution fails because indefinite subnet-wide access exceeds the stated one-device maintenance requirement; the second fails because indiscriminate placement ignores differences between contractor, HMI and controller privileges. For this hydroelectric generation site, the first finding is that a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet, while the other is that the production VLAN should change according to the registered host's assigned industrial role; neither is corrected by the chosen substitutions.

B:

The second part is useful because the device or host role can drive the resulting VLAN instead of a single shared access state; however, the first part fails because indefinite subnet-wide access exceeds the stated one-device maintenance requirement. The first gap remains unresolved at the hydroelectric generation site: a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet; the second measure helps with the production VLAN should change according to the registered host's assigned industrial role but cannot repair it.

D:

The first action is suitable because narrowing identity, endpoints and protocols constrains maintenance reachability to the documented task; the second is misdirected because indiscriminate placement ignores differences between contractor, HMI and controller privileges. At the hydroelectric generation site, the remaining second gap is that the production VLAN should change according to the registered host's assigned industrial role, even though a maintenance laptop needs a narrow temporary path to one PLC rather than access to the entire control subnet is covered.

Question 647

At an OT architecture workshop covering the natural-gas compression station, the priority items are: (1) existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users; and (2) users on registered workstations need to authenticate before the access port returns to a production VLAN. Which joint design is aligned with the exact detection and enforcement gaps?

  1. Replace user association with a static source-IP allowlist; then substitute MAC registration as proof of the current human user
  2. Replace user association with a static source-IP allowlist; then use FortiNAC forced authentication on the relevant ports
  3. Apply identity-aware firewall rules using the authenticated user group; then use FortiNAC forced authentication on the relevant ports
  4. Evaluate Fortinet single sign-on integration and user-to-IP mappings; then substitute MAC registration as proof of the current human user
  5. Evaluate Fortinet single sign-on integration and user-to-IP mappings; then use FortiNAC forced authentication on the relevant ports

Explanation

Correct Answer

E:

The first control fits because FSSO can make identity associations available to firewall policy when the identity source and mapping are trusted; the second fits because the isolated state can persist until a verified user authenticates to release the port. Together they resolve the separate findings at the natural-gas compression station: existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users, and users on registered workstations need to authenticate before the access port returns to a production VLAN. This addresses existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users without bypassing the separate requirement that users on registered workstations need to authenticate before the access port returns to a production VLAN.

Incorrect Answers

A:

The first substitution fails because a reusable workstation address does not reliably identify the person currently signed in; the second fails because a registered device does not establish which individual is logged on. For this natural-gas compression station, the first finding is that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users, while the other is that users on registered workstations need to authenticate before the access port returns to a production VLAN; neither is corrected by the chosen substitutions.

B:

The second part is useful because the isolated state can persist until a verified user authenticates to release the port; however, the first part fails because a reusable workstation address does not reliably identify the person currently signed in. The first gap remains unresolved at the natural-gas compression station: existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users; the second measure helps with users on registered workstations need to authenticate before the access port returns to a production VLAN but cannot repair it.

C:

The second action addresses users on registered workstations need to authenticate before the access port returns to a production VLAN because the isolated state can persist until a verified user authenticates to release the port, but the separate first finding still concerns existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users. The proposed first mechanism belongs to a different requirement: firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; group-scoped authorization links a verified human identity to the permitted network session, but despite the valid second control for users on registered workstations need to authenticate before the access port returns to a production VLAN, it does not resolve the first finding at the natural-gas compression station: existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users.

D:

The first action is suitable because FSSO can make identity associations available to firewall policy when the identity source and mapping are trusted; the second is misdirected because a registered device does not establish which individual is logged on. At the natural-gas compression station, the remaining second gap is that users on registered workstations need to authenticate before the access port returns to a production VLAN, even though existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users is covered.

Question 648

The controls engineer and SOC analyst for the mineral processing site must jointly address the following: (1) controls engineers cannot patch an essential controller until the next shutdown and the risk must be accepted or mitigated formally; and (2) managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. Which joint design is aligned with the exact detection and enforcement gaps?

  1. Delete the vulnerability ticket once maintenance is postponed; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  2. Document compensating controls, owner approval and a time-bound residual-risk plan; then export the firewall's unfiltered current session table once
  3. Document compensating controls, owner approval and a time-bound residual-risk plan; then schedule and scope a FortiAnalyzer report using appropriate OT datasets
  4. Delete the vulnerability ticket once maintenance is postponed; then export the firewall's unfiltered current session table once

Explanation

Correct Answer

C:

The first control fits because deferred firmware fixes require explicit accountability and interim network controls; the second fits because reports aggregate retained security data into a repeatable operational review artifact. Together they resolve the separate findings at the mineral processing site: controls engineers cannot patch an essential controller until the next shutdown and the risk must be accepted or mitigated formally, and managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs. This addresses controls engineers cannot patch an essential controller until the next shutdown and the risk must be accepted or mitigated formally without bypassing the separate requirement that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs.

Incorrect Answers

A:

The second part is useful because reports aggregate retained security data into a repeatable operational review artifact; however, the first part fails because closing the record without a treatment plan loses ownership of the remaining hazard. The first gap remains unresolved at the mineral processing site: controls engineers cannot patch an essential controller until the next shutdown and the risk must be accepted or mitigated formally; the second measure helps with managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs but cannot repair it.

B:

The first action is suitable because deferred firmware fixes require explicit accountability and interim network controls; the second is misdirected because a one-time active-session snapshot is not a historical threat trend report. At the mineral processing site, the remaining second gap is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs, even though controls engineers cannot patch an essential controller until the next shutdown and the risk must be accepted or mitigated formally is covered.

D:

The first substitution fails because closing the record without a treatment plan loses ownership of the remaining hazard; the second fails because a one-time active-session snapshot is not a historical threat trend report. For this mineral processing site, the first finding is that controls engineers cannot patch an essential controller until the next shutdown and the risk must be accepted or mitigated formally, while the other is that managers need repeated OT threat trends from FortiAnalyzer without manually collecting individual firewall logs; neither is corrected by the chosen substitutions.

Question 649

At a regional pipeline control center, engineers must address both of these documented gaps: (1) a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild; and (2) an already registered device was classified incorrectly and rerunning rogue rules does not change it. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.

  1. Run rogue profiling repeatedly without changing registration state
  2. Rank vulnerabilities by a generic severity score without examining KEV status
  3. Review the KEV indicators associated with the discovered asset vulnerability
  4. Manually correct the registered host or reintroduce it into the appropriate classification workflow

Explanation

Correct Answers

C:

The relevant technical distinction for the regional pipeline control center is that known-exploited-vulnerability context differentiates observed exploitation relevance from an undifferentiated list of weaknesses; that directly resolves the requirement that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild; it is evaluated alongside the separate requirement that an already registered device was classified incorrectly and rerunning rogue rules does not change it.

D:

In this regional pipeline control center scenario, profiling re-evaluation acts on remaining rogues rather than automatically rewriting every registered inventory object; that directly resolves the requirement that an already registered device was classified incorrectly and rerunning rogue rules does not change it; it is evaluated alongside the separate requirement that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild.

Incorrect Answers

A:

At the regional pipeline control center, this substitutes a measure addressing a different concern: a registered endpoint is outside the ordinary rogue-only re-evaluation scope; it leaves unresolved the finding that an already registered device was classified incorrectly and rerunning rogue rules does not change it; the parallel design also has to address a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild.

B:

The mismatch at the regional pipeline control center is specific to the observed control requirement: severity-only ordering omits the exploited-in-the-wild evidence explicitly required by the analyst; it leaves unresolved the finding that a vulnerability widget shows an OT weakness but the analyst needs to prioritize those known to be exploited in the wild; the parallel design also has to address an already registered device was classified incorrectly and rerunning rogue rules does not change it.

Question 650

The automated packaging warehouse needs a bounded configuration change in response to both observations: (1) industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network; and (2) a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. Which paired configuration should be included in the approved OT security change?

  1. Audit allowed tagged VLANs and native-VLAN behavior on both trunk ends; then inspect only traffic leaving the company for the Internet
  2. Add a routed inter-VLAN policy without correcting allowed trunk VLANs; then inspect only traffic leaving the company for the Internet
  3. Audit allowed tagged VLANs and native-VLAN behavior on both trunk ends; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths
  4. Validate the industrial redundancy mechanism and the firewall failure behavior together; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths
  5. Add a routed inter-VLAN policy without correcting allowed trunk VLANs; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths

Explanation

Correct Answer

C:

The first control fits because consistent trunk membership prevents a control VLAN from being carried where it is not approved; the second fits because restricting east-west flows contains lateral movement that perimeter-only inspection would not see. Together they resolve the separate findings at the automated packaging warehouse: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network, and a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. This addresses industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network without bypassing the separate requirement that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area.

Incorrect Answers

A:

The first action is suitable because consistent trunk membership prevents a control VLAN from being carried where it is not approved; the second is misdirected because external egress policy misses peer-to-peer communications within the industrial environment. At the automated packaging warehouse, the remaining second gap is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, even though industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network is covered.

B:

The first substitution fails because layer-three policy cannot repair frames leaked by an unintended layer-two trunk membership; the second fails because external egress policy misses peer-to-peer communications within the industrial environment. For this automated packaging warehouse, the first finding is that industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network, while the other is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; neither is corrected by the chosen substitutions.

D:

The second action addresses a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area because restricting east-west flows contains lateral movement that perimeter-only inspection would not see, but the separate first finding still concerns industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network. The proposed first mechanism belongs to a different requirement: a ring-topology automation network has stringent recovery-time requirements before a segmentation change; acceptable availability depends on convergence and failover characteristics of the whole industrial path, but despite the valid second control for a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, it does not resolve the first finding at the automated packaging warehouse: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network.

E:

The second part is useful because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; however, the first part fails because layer-three policy cannot repair frames leaked by an unintended layer-two trunk membership. The first gap remains unresolved at the automated packaging warehouse: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network; the second measure helps with a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area but cannot repair it.

Fortinet NSE 6 - OT Security 7.6 Architect (NSE6_OTS_AR-7.6) Practice Tests