Fortinet NSE6_OTS_AR-7.6 (Fortinet NSE 6 - OT Security 7.6 Architect) Practice Test 66

Question 650

The automated packaging warehouse needs a bounded configuration change in response to both observations: (1) industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network; and (2) a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. Which paired configuration should be included in the approved OT security change?

  1. Audit allowed tagged VLANs and native-VLAN behavior on both trunk ends; then inspect only traffic leaving the company for the Internet
  2. Add a routed inter-VLAN policy without correcting allowed trunk VLANs; then inspect only traffic leaving the company for the Internet
  3. Audit allowed tagged VLANs and native-VLAN behavior on both trunk ends; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths
  4. Validate the industrial redundancy mechanism and the firewall failure behavior together; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths
  5. Add a routed inter-VLAN policy without correcting allowed trunk VLANs; then introduce internal segmentation rules on actual historian-to-PLC forwarding paths

Explanation

Correct Answer

C:

The first control fits because consistent trunk membership prevents a control VLAN from being carried where it is not approved; the second fits because restricting east-west flows contains lateral movement that perimeter-only inspection would not see. Together they resolve the separate findings at the automated packaging warehouse: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network, and a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. This addresses industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network without bypassing the separate requirement that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area.

Incorrect Answers

A:

The first action is suitable because consistent trunk membership prevents a control VLAN from being carried where it is not approved; the second is misdirected because external egress policy misses peer-to-peer communications within the industrial environment. At the automated packaging warehouse, the remaining second gap is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, even though industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network is covered.

B:

The first substitution fails because layer-three policy cannot repair frames leaked by an unintended layer-two trunk membership; the second fails because external egress policy misses peer-to-peer communications within the industrial environment. For this automated packaging warehouse, the first finding is that industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network, while the other is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; neither is corrected by the chosen substitutions.

D:

The second action addresses a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area because restricting east-west flows contains lateral movement that perimeter-only inspection would not see, but the separate first finding still concerns industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network. The proposed first mechanism belongs to a different requirement: a ring-topology automation network has stringent recovery-time requirements before a segmentation change; acceptable availability depends on convergence and failover characteristics of the whole industrial path, but despite the valid second control for a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, it does not resolve the first finding at the automated packaging warehouse: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network.

E:

The second part is useful because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; however, the first part fails because layer-three policy cannot repair frames leaked by an unintended layer-two trunk membership. The first gap remains unresolved at the automated packaging warehouse: industrial trunk links have inconsistent VLAN tagging and an isolated OT segment leaks into an unintended access network; the second measure helps with a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area but cannot repair it.

Question 651

An audit at the automotive assembly line finds that an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled. What is the most targeted response?

  1. Correlate application-control identification with IPS threat events
  2. Verify the relevant FortiGuard OT Security Service license before relying on the package
  3. Allow every operation merely because it uses a familiar OT protocol
  4. Use protocol-aware industrial command controls where supported and validate safe operations

Explanation

Correct Answer

D:

The relevant technical distinction for the automotive assembly line is that understanding allowed read versus write or configuration functions avoids treating all protocol payloads alike; that directly resolves the requirement that an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled.

Incorrect Answers

A:

At the automotive assembly line, this mechanism serves the separate situation where the security team needs to distinguish the protocol family in OT traffic from whether a known exploit signature was triggered, whereas the present finding is that an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled; although application detection describes the traffic type while IPS alerts indicate a matching malicious pattern, the required capability remains missing.

B:

At the automotive assembly line, this mechanism serves the separate situation where an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription, whereas the present finding is that an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled; although dedicated OT definitions depend on service entitlement as well as successful distribution and applied inspection, the required capability remains missing.

C:

The mismatch at the automotive assembly line is specific to the observed control requirement: protocol family membership does not determine whether a particular controller command is safe; it leaves unresolved the finding that an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled.

Question 652

The design authority for the pharmaceutical production floor reports this gap: a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. The proposed shortcut is to leave a permanent all-contractor subnet allow rule as a fallback. Which alternative should the architect approve instead?

  1. Integrate a supported remote authentication provider and map the appropriate user group
  2. Align firewall authorizations with up-to-date user group membership and session handling
  3. Leave a permanent all-contractor subnet allow rule as a fallback
  4. Apply identity-aware firewall rules using the authenticated user group

Explanation

Correct Answer

B:

The relevant technical distinction for the pharmaceutical production floor is that revocation must be reflected in both identity state and effective policy for the access path; that directly resolves the requirement that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access.

Incorrect Answers

A:

At the pharmaceutical production floor, this mechanism serves the separate situation where the plant uses a centralized directory and wants to authenticate named engineers without maintaining separate local passwords on each firewall, whereas the present finding is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access; although centralized identity can validate named users and keep role-based policies aligned with directory membership, the required capability remains missing.

C:

The mismatch at the pharmaceutical production floor is specific to the observed control requirement: an IP-only bypass defeats centralized deprovisioning and least privilege; it leaves unresolved the finding that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access.

D:

At the pharmaceutical production floor, this mechanism serves the separate situation where firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet, whereas the present finding is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access; although group-scoped authorization links a verified human identity to the permitted network session, the required capability remains missing.

Question 653

At an OT architecture workshop covering the cold-storage automation plant, the priority items are: (1) traffic from an engineer workstation and a safety controller shares one untagged broadcast domain; and (2) an unregistered maintenance laptop should be unable to join the production VLAN until approved. Which paired configuration should be included in the approved OT security change?

  1. Install a router ACL while retaining the original shared layer-two segment; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
  2. Install a router ACL while retaining the original shared layer-two segment; then place all newly seen endpoints immediately in the production VLAN
  3. Define distinct VLANs for the engineering and control populations; then place all newly seen endpoints immediately in the production VLAN
  4. Define distinct VLANs for the engineering and control populations; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN

Explanation

Correct Answer

D:

The first control fits because VLAN separation limits layer-two broadcast reach and enables more explicit inter-VLAN policy boundaries; the second fits because unknown endpoints can be put into a restricted VLAN pending their registration and authorization. Together they resolve the separate findings at the cold-storage automation plant: traffic from an engineer workstation and a safety controller shares one untagged broadcast domain, and an unregistered maintenance laptop should be unable to join the production VLAN until approved. This addresses traffic from an engineer workstation and a safety controller shares one untagged broadcast domain without bypassing the separate requirement that an unregistered maintenance laptop should be unable to join the production VLAN until approved.

Incorrect Answers

A:

The second part is useful because unknown endpoints can be put into a restricted VLAN pending their registration and authorization; however, the first part fails because a routed ACL may filter subnet crossings but does not split a common layer-two broadcast domain. The first gap remains unresolved at the cold-storage automation plant: traffic from an engineer workstation and a safety controller shares one untagged broadcast domain; the second measure helps with an unregistered maintenance laptop should be unable to join the production VLAN until approved but cannot repair it.

B:

The first substitution fails because a routed ACL may filter subnet crossings but does not split a common layer-two broadcast domain; the second fails because open admission undermines the stated unknown-device quarantine policy. For this cold-storage automation plant, the first finding is that traffic from an engineer workstation and a safety controller shares one untagged broadcast domain, while the other is that an unregistered maintenance laptop should be unable to join the production VLAN until approved; neither is corrected by the chosen substitutions.

C:

The first action is suitable because VLAN separation limits layer-two broadcast reach and enables more explicit inter-VLAN policy boundaries; the second is misdirected because open admission undermines the stated unknown-device quarantine policy. At the cold-storage automation plant, the remaining second gap is that an unregistered maintenance laptop should be unable to join the production VLAN until approved, even though traffic from an engineer workstation and a safety controller shares one untagged broadcast domain is covered.

Question 654

The controls engineer and SOC analyst for the bulk-material handling facility must jointly address the following: (1) an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled; and (2) a device has an identified vulnerability but its vendor update cannot be applied until the next outage. Which paired configuration should be included in the approved OT security change?

  1. Use protocol-aware industrial command controls where supported and validate safe operations; then declare the endpoint permanently remediated without testing the mitigation
  2. Allow every operation merely because it uses a familiar OT protocol; then apply appropriate virtual patching coverage to the matching device traffic
  3. Allow every operation merely because it uses a familiar OT protocol; then declare the endpoint permanently remediated without testing the mitigation
  4. Verify the relevant FortiGuard OT Security Service license before relying on the package; then apply appropriate virtual patching coverage to the matching device traffic
  5. Use protocol-aware industrial command controls where supported and validate safe operations; then apply appropriate virtual patching coverage to the matching device traffic

Explanation

Correct Answer

E:

The first control fits because understanding allowed read versus write or configuration functions avoids treating all protocol payloads alike; the second fits because virtual patching can use vulnerability-linked network mitigations without changing the controller firmware immediately. Together they resolve the separate findings at the bulk-material handling facility: an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled, and a device has an identified vulnerability but its vendor update cannot be applied until the next outage. This addresses an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled without bypassing the separate requirement that a device has an identified vulnerability but its vendor update cannot be applied until the next outage.

Incorrect Answers

A:

The first action is suitable because understanding allowed read versus write or configuration functions avoids treating all protocol payloads alike; the second is misdirected because a network workaround does not replace the underlying vendor patch or validate the residual exposure. At the bulk-material handling facility, the remaining second gap is that a device has an identified vulnerability but its vendor update cannot be applied until the next outage, even though an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled is covered.

B:

The second part is useful because virtual patching can use vulnerability-linked network mitigations without changing the controller firmware immediately; however, the first part fails because protocol family membership does not determine whether a particular controller command is safe. The first gap remains unresolved at the bulk-material handling facility: an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled; the second measure helps with a device has an identified vulnerability but its vendor update cannot be applied until the next outage but cannot repair it.

C:

The first substitution fails because protocol family membership does not determine whether a particular controller command is safe; the second fails because a network workaround does not replace the underlying vendor patch or validate the residual exposure. For this bulk-material handling facility, the first finding is that an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled, while the other is that a device has an identified vulnerability but its vendor update cannot be applied until the next outage; neither is corrected by the chosen substitutions.

D:

The second action addresses a device has an identified vulnerability but its vendor update cannot be applied until the next outage because virtual patching can use vulnerability-linked network mitigations without changing the controller firmware immediately, but the separate first finding still concerns an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled. The proposed first mechanism belongs to a different requirement: an OT signature package is missing despite WAN connectivity and no valid dedicated OT service subscription; dedicated OT definitions depend on service entitlement as well as successful distribution and applied inspection, but despite the valid second control for a device has an identified vulnerability but its vendor update cannot be applied until the next outage, it does not resolve the first finding at the bulk-material handling facility: an engineering workstation is allowed to read controller values but unauthorised program-changing operations must be controlled.

Question 655

An OT architect reviewing the paper mill control network observes two independent gaps: (1) the engineer must inspect virtual patch coverage on TLS-protected traffic and payload inspection is absent; and (2) an OPC UA telemetry server must serve selected clients but no other production hosts. Which two measures correctly map to the operational and security requirements?

  1. Determine whether policy-compatible TLS deep inspection is possible for the affected flow; then permit arbitrary inbound sessions to all OPC UA endpoints
  2. Retain certificate-only TLS inspection and increase traffic-log detail; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
  3. Determine whether policy-compatible TLS deep inspection is possible for the affected flow; then restrict OPC UA communications to approved clients and endpoints with appropriate protocol awareness
  4. Retain certificate-only TLS inspection and increase traffic-log detail; then permit arbitrary inbound sessions to all OPC UA endpoints

Explanation

Correct Answer

C:

The first control fits because encrypted application data may need approved decryption before payload-based mitigations can match; the second fits because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure. Together they resolve the separate findings at the paper mill control network: the engineer must inspect virtual patch coverage on TLS-protected traffic and payload inspection is absent, and an OPC UA telemetry server must serve selected clients but no other production hosts. This addresses the engineer must inspect virtual patch coverage on TLS-protected traffic and payload inspection is absent without bypassing the separate requirement that an OPC UA telemetry server must serve selected clients but no other production hosts.

Incorrect Answers

A:

The first action is suitable because encrypted application data may need approved decryption before payload-based mitigations can match; the second is misdirected because open access disregards the intended client and server trust boundary. At the paper mill control network, the remaining second gap is that an OPC UA telemetry server must serve selected clients but no other production hosts, even though the engineer must inspect virtual patch coverage on TLS-protected traffic and payload inspection is absent is covered.

B:

The second part is useful because restricting clients and service endpoints preserves authorized data exchange without treating the server as public infrastructure; however, the first part fails because certificate metadata alone cannot reveal protected application data to an inline payload signature. The first gap remains unresolved at the paper mill control network: the engineer must inspect virtual patch coverage on TLS-protected traffic and payload inspection is absent; the second measure helps with an OPC UA telemetry server must serve selected clients but no other production hosts but cannot repair it.

D:

The first substitution fails because certificate metadata alone cannot reveal protected application data to an inline payload signature; the second fails because open access disregards the intended client and server trust boundary. For this paper mill control network, the first finding is that the engineer must inspect virtual patch coverage on TLS-protected traffic and payload inspection is absent, while the other is that an OPC UA telemetry server must serve selected clients but no other production hosts; neither is corrected by the chosen substitutions.

Question 656

The asset owner of the district heating plant wants to correct both of these deficiencies: (1) the security team must keep two production units' routing tables and firewall administration separate on shared hardware; and (2) a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination. Which paired configuration should be included in the approved OT security change?

  1. Use separate FortiGate VDOMs with appropriate inter-VDOM boundaries; then keep resetting the technician's second factor without checking authorization
  2. Create two address objects inside one unrestricted policy set; then keep resetting the technician's second factor without checking authorization
  3. Use separate FortiGate VDOMs with appropriate inter-VDOM boundaries; then inspect the authenticated user's group and matching firewall policy scope
  4. Create two address objects inside one unrestricted policy set; then inspect the authenticated user's group and matching firewall policy scope

Explanation

Correct Answer

C:

The first control fits because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels; the second fits because successful authentication does not itself grant every destination and service; authorization is evaluated separately. Together they resolve the separate findings at the district heating plant: the security team must keep two production units' routing tables and firewall administration separate on shared hardware, and a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination. This addresses the security team must keep two production units' routing tables and firewall administration separate on shared hardware without bypassing the separate requirement that a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination.

Incorrect Answers

A:

The first action is suitable because VDOM isolation separates routing and policy contexts rather than merely giving interfaces different labels; the second is misdirected because factor enrollment does not change a missing destination or service permission. At the district heating plant, the remaining second gap is that a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination, even though the security team must keep two production units' routing tables and firewall administration separate on shared hardware is covered.

B:

The first substitution fails because address objects alone do not create separate forwarding or administrative instances; the second fails because factor enrollment does not change a missing destination or service permission. For this district heating plant, the first finding is that the security team must keep two production units' routing tables and firewall administration separate on shared hardware, while the other is that a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination; neither is corrected by the chosen substitutions.

D:

The second part is useful because successful authentication does not itself grant every destination and service; authorization is evaluated separately; however, the first part fails because address objects alone do not create separate forwarding or administrative instances. The first gap remains unresolved at the district heating plant: the security team must keep two production units' routing tables and firewall administration separate on shared hardware; the second measure helps with a technician can log in to a portal but cannot reach a required PLC because the effective network policy lacks that destination but cannot repair it.

Question 657

Following a joint IT/OT risk review at the petrochemical blending plant, two required changes emerge: (1) existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users; and (2) an unregistered maintenance laptop should be unable to join the production VLAN until approved. Which paired action most directly satisfies both findings without introducing an unrelated control change?

  1. Replace user association with a static source-IP allowlist; then place all newly seen endpoints immediately in the production VLAN
  2. Replace user association with a static source-IP allowlist; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
  3. Evaluate Fortinet single sign-on integration and user-to-IP mappings; then place all newly seen endpoints immediately in the production VLAN
  4. Apply identity-aware firewall rules using the authenticated user group; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN
  5. Evaluate Fortinet single sign-on integration and user-to-IP mappings; then configure FortiNAC forced registration with an appropriate registration or isolation VLAN

Explanation

Correct Answer

E:

The first control fits because FSSO can make identity associations available to firewall policy when the identity source and mapping are trusted; the second fits because unknown endpoints can be put into a restricted VLAN pending their registration and authorization. Together they resolve the separate findings at the petrochemical blending plant: existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users, and an unregistered maintenance laptop should be unable to join the production VLAN until approved. This addresses existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users without bypassing the separate requirement that an unregistered maintenance laptop should be unable to join the production VLAN until approved.

Incorrect Answers

A:

The first substitution fails because a reusable workstation address does not reliably identify the person currently signed in; the second fails because open admission undermines the stated unknown-device quarantine policy. For this petrochemical blending plant, the first finding is that existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users, while the other is that an unregistered maintenance laptop should be unable to join the production VLAN until approved; neither is corrected by the chosen substitutions.

B:

The second part is useful because unknown endpoints can be put into a restricted VLAN pending their registration and authorization; however, the first part fails because a reusable workstation address does not reliably identify the person currently signed in. The first gap remains unresolved at the petrochemical blending plant: existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users; the second measure helps with an unregistered maintenance laptop should be unable to join the production VLAN until approved but cannot repair it.

C:

The first action is suitable because FSSO can make identity associations available to firewall policy when the identity source and mapping are trusted; the second is misdirected because open admission undermines the stated unknown-device quarantine policy. At the petrochemical blending plant, the remaining second gap is that an unregistered maintenance laptop should be unable to join the production VLAN until approved, even though existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users is covered.

D:

The second action addresses an unregistered maintenance laptop should be unable to join the production VLAN until approved because unknown endpoints can be put into a restricted VLAN pending their registration and authorization, but the separate first finding still concerns existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users. The proposed first mechanism belongs to a different requirement: firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; group-scoped authorization links a verified human identity to the permitted network session, but despite the valid second control for an unregistered maintenance laptop should be unable to join the production VLAN until approved, it does not resolve the first finding at the petrochemical blending plant: existing domain sign-in information must inform access decisions without repeatedly prompting authenticated workstation users.

Question 658

At a building-management control network, engineers must address both of these documented gaps: (1) a ring-topology automation network has stringent recovery-time requirements before a segmentation change; and (2) firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet. Which TWO independently necessary controls directly fulfill the two requirements? Choose TWO.

  1. Authorize every source address in the engineering LAN without authentication
  2. Validate the industrial redundancy mechanism and the firewall failure behavior together
  3. Apply identity-aware firewall rules using the authenticated user group
  4. Assume any second Ethernet cable guarantees hitless recovery
  5. Define distinct VLANs for the engineering and control populations

Explanation

Correct Answers

B:

At the building-management control network, acceptable availability depends on convergence and failover characteristics of the whole industrial path; that directly resolves the requirement that a ring-topology automation network has stringent recovery-time requirements before a segmentation change; it is evaluated alongside the separate requirement that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet.

C:

The relevant technical distinction for the building-management control network is that group-scoped authorization links a verified human identity to the permitted network session; that directly resolves the requirement that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; it is evaluated alongside the separate requirement that a ring-topology automation network has stringent recovery-time requirements before a segmentation change.

Incorrect Answers

A:

The mismatch at the building-management control network is specific to the observed control requirement: host subnet membership does not prove the user's membership in the maintenance role; it leaves unresolved the finding that firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet; the parallel design also has to address a ring-topology automation network has stringent recovery-time requirements before a segmentation change.

D:

At the building-management control network, the expected mechanism is absent because physical duplication alone does not configure ring recovery or state continuity; it leaves unresolved the finding that a ring-topology automation network has stringent recovery-time requirements before a segmentation change; the parallel design also has to address firewall policy should authorize a named maintenance group rather than every endpoint on the engineering subnet.

E:

At the building-management control network, this mechanism serves the separate situation where traffic from an engineer workstation and a safety controller shares one untagged broadcast domain, whereas the present finding is that a ring-topology automation network has stringent recovery-time requirements before a segmentation change; although VLAN separation limits layer-two broadcast reach and enables more explicit inter-VLAN policy boundaries, the required capability remains missing.

Question 659

An industrial network audit at the food-processing factory establishes two requirements: (1) the team expects current device vulnerability mappings after new FortiGuard definitions are issued; and (2) IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. Which two measures correctly map to the operational and security requirements?

  1. Check valid update connectivity or the approved offline package update path; then expose IEC 104 services to any routable corporate address
  2. Depend on firmware uptime to make signatures self-update; then expose IEC 104 services to any routable corporate address
  3. Prioritize a temporary validated network mitigation and track the residual remediation task; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
  4. Check valid update connectivity or the approved offline package update path; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers
  5. Depend on firmware uptime to make signatures self-update; then define strictly scoped IEC 104 conduit policies consistent with authorized SCADA peers

Explanation

Correct Answer

D:

The first control fits because local signature and vulnerability intelligence must be refreshed through an authorized update workflow; the second fits because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface. Together they resolve the separate findings at the food-processing factory: the team expects current device vulnerability mappings after new FortiGuard definitions are issued, and IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries. This addresses the team expects current device vulnerability mappings after new FortiGuard definitions are issued without bypassing the separate requirement that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries.

Incorrect Answers

A:

The first action is suitable because local signature and vulnerability intelligence must be refreshed through an authorized update workflow; the second is misdirected because broad routed availability violates the small set of approved SCADA relationships. At the food-processing factory, the remaining second gap is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, even though the team expects current device vulnerability mappings after new FortiGuard definitions are issued is covered.

B:

The first substitution fails because elapsed running time is not a mechanism for acquiring new threat definitions; the second fails because broad routed availability violates the small set of approved SCADA relationships. For this food-processing factory, the first finding is that the team expects current device vulnerability mappings after new FortiGuard definitions are issued, while the other is that IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries; neither is corrected by the chosen substitutions.

C:

The second action addresses IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface, but the separate first finding still concerns the team expects current device vulnerability mappings after new FortiGuard definitions are issued. The proposed first mechanism belongs to a different requirement: OT asset intelligence shows a known exploited vulnerability in a controller but the maintenance patch is deferred; KEV context raises exploit concern while temporary protection should remain linked to the eventual vendor fix, but despite the valid second control for IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries, it does not resolve the first finding at the food-processing factory: the team expects current device vulnerability mappings after new FortiGuard definitions are issued.

E:

The second part is useful because telemetry protocol awareness and peer restrictions reduce exposure of the substation interface; however, the first part fails because elapsed running time is not a mechanism for acquiring new threat definitions. The first gap remains unresolved at the food-processing factory: the team expects current device vulnerability mappings after new FortiGuard definitions are issued; the second measure helps with IEC 60870-5-104 telemetry from a remote substation requires controlled inbound and outbound trust boundaries but cannot repair it.

Question 660

At the regional pipeline control center, the change board has logged the following control requirements: (1) a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; and (2) a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. Which plan provides the needed control for each finding rather than a superficial substitute?

  1. Introduce internal segmentation rules on actual historian-to-PLC forwarding paths; then leave a permanent all-contractor subnet allow rule as a fallback
  2. Enforce a cell-to-cell allowlist at a routed or transparent segmentation boundary; then align firewall authorizations with up-to-date user group membership and session handling
  3. Introduce internal segmentation rules on actual historian-to-PLC forwarding paths; then align firewall authorizations with up-to-date user group membership and session handling
  4. Inspect only traffic leaving the company for the Internet; then align firewall authorizations with up-to-date user group membership and session handling
  5. Inspect only traffic leaving the company for the Internet; then leave a permanent all-contractor subnet allow rule as a fallback

Explanation

Correct Answer

C:

The first control fits because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; the second fits because revocation must be reflected in both identity state and effective policy for the access path. Together they resolve the separate findings at the regional pipeline control center: a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, and a contractor account has been removed from the identity provider but an old local allow rule still provides broad access. This addresses a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area without bypassing the separate requirement that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access.

Incorrect Answers

A:

The first action is suitable because restricting east-west flows contains lateral movement that perimeter-only inspection would not see; the second is misdirected because an IP-only bypass defeats centralized deprovisioning and least privilege. At the regional pipeline control center, the remaining second gap is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access, even though a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area is covered.

B:

The second action addresses a contractor account has been removed from the identity provider but an old local allow rule still provides broad access because revocation must be reflected in both identity state and effective policy for the access path, but the separate first finding still concerns a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area. The proposed first mechanism belongs to a different requirement: a plant needs to block an unauthorized engineering workstation moving from a packaging cell into a utilities cell; crossing-cell policy distinguishes approved production exchanges from workstation lateral movement, but despite the valid second control for a contractor account has been removed from the identity provider but an old local allow rule still provides broad access, it does not resolve the first finding at the regional pipeline control center: a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area.

D:

The second part is useful because revocation must be reflected in both identity state and effective policy for the access path; however, the first part fails because external egress policy misses peer-to-peer communications within the industrial environment. The first gap remains unresolved at the regional pipeline control center: a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area; the second measure helps with a contractor account has been removed from the identity provider but an old local allow rule still provides broad access but cannot repair it.

E:

The first substitution fails because external egress policy misses peer-to-peer communications within the industrial environment; the second fails because an IP-only bypass defeats centralized deprovisioning and least privilege. For this regional pipeline control center, the first finding is that a compromised historian should not be able to initiate sessions to peer PLCs inside the same operational area, while the other is that a contractor account has been removed from the identity provider but an old local allow rule still provides broad access; neither is corrected by the chosen substitutions.

Fortinet NSE 6 - OT Security 7.6 Architect (NSE6_OTS_AR-7.6) Practice Tests